Regional Institute Of Medical Sciences Tender

Half brick masonry with Ist class common burnt clayF.P.S.(nonmodular) bricks in superstructure above plinth level up to floor V level in

Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Providing and fixing 18mm thick gang saw cut mirror polished(premoulded and prepolished ) machine cut for kitchen platforms,vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand)with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade

80xl.25mm M.S. laths with 1.25 mm thick top cover.

Providing and fixing 25 mm thick shutters for cupboards etc.including ISl marked black enamelled M.S. butt hinges withnecessary screws :

Providing wood work in frames of doors, windows, clerestory window sand other frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately :Local best quality Teak wood

Providing and fixing panelling or panelling and glazing in panelledor panelled and glazed shutters for doors, windows and clerestorywindows (Area of opening for panel inserts excluding portioninside grooves or rebates to be measured). Panelling for panelledor panelled and glazed shutters 25 mm to 40 mm thick :

Local best quality Teak wood

Providing and fixing 25 mm thick shutters for cupboards etc.including ISl marked black enamelled M.S. butt hinges withnecessary screws :

Providing and fixing at all height false ceiling including providingand fixing of frame work made of special sections, power pressedfrom M.S. sheet and galvanised with zinc coating of 120 gms/ sqm(both sided inclusive) as per IS : 277 and consisting of angle cleatsof size 25mm wide x 1.6mm thick with flanges of 27mm and37mm, at 1200mm centre to centre, one flange fixed to the ceilingwith dash fastener 12.5mm diax50mm long with 6mm diabolts,other flange of cleat fixed to the angle hangers of25x25x0.55mm of required length with nuts and bolts of requiredsize and the other end of the angle hanger fixed with intermediateG.I. channels 45x15x0.9mm running at the spacing of 1200mmcentre to centre, to which the ceiling section 0.5mm thick bottomwedge of 80mm with tapered flanges of 26mm each having clips of10.5mm at 450mm centre to centre, shall be fixed in a directionperpendicular to G.I. intermediate channel with connecting clipsmade out of 2.64mm diax230mm long G.I. wire at every junction,including fixing perimeter channels 0.5mm thick 27mm high havingflanges of 20mm and 30mm long, the perimeter of ceiling fixed towall/partition with the help of rawl plugs at 450mm centre, with25mm long drive-all screws @ 230mm interval, including fixing ofgypsum board to ceiling section and perimeter channel with thehelp of dry wall

screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishng to a flush finish of tapered and square edges of the boardwith recommended jointing compound,jointing tapes, finishing with jointing compund in 3 layers covering upto 150 mm on bothsides of joint and two coats of primer suitable for board,all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, and specification and direction of the Engineer in Charge but excluding the cost of painting with :

Fully Perforated Gypsum Plaster Board of size 1200 x 2400 x 12.5mm having approx. 15% perforated size and pattern as approvedby the Engineer-in-charge and as per manufacter's specification,with all 4 sides tapered and backed by acoustical tissue with NRC value not less than 0.60.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.

Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq. metres and under including cutting the patch in propershape, raking out joints and preparing and plastering the surface ofthe walls complete including disposal of rubbish to thedumpingground within 50 metres lead :

With cement mortar 1:4 (1 cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having VOC (VolatileOrganic Compound ) content less than 50 grams/ litre, of approvedbrand and manufacture, including applying additional coatswherever required, to achieve even shade and colour.

Providing, fixing, testing and commissionning air conditioning unit, electrical wiring for electrical fixtures all complete.

Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs andscrews or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred andjointed mechanically wherever required including cleatangle, Aluminium snap beading for glazing / panelling, C.P. brass /stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling tobe paid for separately):

a) For Fixed Portion

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. withE PDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness

12 mm thick pre-laminated particle board (decorative lamination on both sides) grade -1, medium density flat pressed, three layer particle board FPT- I or graded wood particle board FPT- I, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823, Grade 1, Type - II marked :

White Vitreous China Surgeon type wash basin of size 660x460mm with a pair of 15 mm C.P. brass pillar taps with elbowincluding operated levers each

Providing and fixing wall paper of approved. Quality Materials : Unitex Elegant or equivalent (washable) to give an even shed.