Regional Institute Of Medical Sciences Tender

Of area 3 sq. metres and below

Cutting out cracks of Wall to V-section, cleaning out, wetting grouting with cement & sand slurry.

Dismantling old plaster or skirting raking out joints and cleaningthe surface for plaster including disposal of rubbish to thedumping ground within 50 metres lead.

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under,including cutting the patch in proper shape, rakingout joints and preparing plastering the wall surface with whitecement based polymer modified self curing mortar, includingdisposal of rubbish, all complete as per the direction of Engineer-In-Charge.

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required.

in grating, frames, guard bar, railing, brackets, gates and similar works.

Providing and fixing at all height false ceiling including providingand fixing of frame work made of special sections, power pressedfrom M.S. sheet and galvanised with zinc coating of 120 gms/ sqm(both sided inclusive) as per IS : 277 and consisting of angle cleatsof size 25mm wide x 1.6mm thick with flanges of 27mm and37mm, at 1200mm centre to centre, one flange fixed to the ceilingwith dash fastener 12.5mm diax50mm long with 6mm diabolts,other flange of cleat fixed to the angle hangers of25x25x0.55mm of required length with nuts and bolts of requiredsize and the other end of the angle hanger fixed with intermediateG.I. channels 45x15x0.9mm running at the spacing of 1200mmcentre to centre, to which the ceiling section 0.5mm thick bottomwedge of 80mm with tapered flanges of 26mm each having clips of10.5mm at 450mm centre to centre, shall be fixed in a directionperpendicular to G.I. intermediate channel with connecting clipsmade out of 2.64mm diax230mm long G.I. wire at every junction,including fixing perimeter channels 0.5mm thick 27mm high havingflanges of 20mm and 30mm long, the perimeter of ceiling fixed towall/partition with the help of rawl plugs at 450mm centre, with25mm long drive-all screws @ 230mm interval, including fixing ofgypsum board to ceiling section and perimeter channel with thehelp of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing andfinishng to a flush finish of tapered and square edges of the boardwith recommended jointing compound,jointing tapes, finishingwith jointing compund in 3 layers covering upto 150 mm on bothsides of joint and two coats of primer suitable for board,all as permanufacturer's specification and also including the cost of makingopenings for light fittings, grills, diffusers, cutouts made withframe of perimeter channels suitably fixed, all complete as perdrawings, and specification and direction of the Engineer in Chargebut excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I

Providing and fixing 9mm heavy duty cement fibre board on walls

Providing and applying white cement based putty of averagethickness 1mm,of approved brand and manufacturer, over theplastered wall surface to prepare the surface even and smooth complete. Two coat

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Water thinnable cement primer

Wall painting with acrylic emulsion paint, having VOC (VolatileOrganic Compound ) content less than 50 grams/ litre, of approvedbrand and manufacture, including applying additional coatswherever required, to achieve even shade and colour.

Two coat

Providing and fixing wall paper of appd. Quanlity.

Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work.

Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwith grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tilesmust be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet for placingthe tiles gently and easily.

Double charge vitrified tile polished finish of size

Size of Tile 600 x 600 mm

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

One or more coats on old work

Providing and fixing white vitreous china pedestal type watercloset (European type W.C. pan) with seat and lid, 10 litre lowlevel white P.V.C. flushing cistern, including flush pipe, withmanually controlled device (handle lever), conforming to IS :7231, with all fittings and fixtures complete, including cuttingand making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and makinggood the walls wherever required:

White Vitreous China Wash basin size 630x450 mm with a pair of15 mm C.P.brass pillar taps

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe

32 mm dia