Police Housing Corporation Limited Tender

View complete overview of Manipur Police Housing Corporation Limited Tender

Police Housing Corporation Limited Tender

Works

Civil And Construction

Building Construction

Security and Emergency Services

Eprocure

Imphal West, Manipur

Opening Date10 Mar 2025

Closing Soon17 Mar 2025

Tender Amount₹ 3,04,20,781

Email

Download

Costs

EMD
₹ 6,08,500
Document Cost
₹ 25,000
Tender Fee
Refer Documents

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2025_MPHCL_2631_1
Tender No
05/EE-II/MPHC/2023-24
Tender Authority
Police Housing Corporation Limited View
Purchaser Address
-
Website
http://manipurtenders.gov.in

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Tender Notice-1858.8 kBTendernotice_1.pdf

NIT

BOQ-1714.8 kBBOQ_2890.xls

Price Bid

Document-318.5 MBDocuments.pdf

Tender Documents

Document-24.4 MBDrawing.pdf

Drawing

Document-153.6 kBTender_Detail_2025...Tender_Detail_2025_MPHCL_2631_1.html

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Dismantling barbed wire or flexible wire rope in fencing includingmaking rolls and stacking within 50 metres lead.

Quantity1

Rate-

Amount -

Dismantling steel work in single sections including dismemberingand stacking within 50 metres lead in:(i)Channels, angles, tees and flats

Quantity279.86

Rate-

Amount -

Demolishing R.C.C. work manually/ by mechanical means includingstacking of steel bars and disposal of unserviceable material within50 metres lead as per direction of Engineer - in- charge.

Quantity9.53

Rate-

Amount -

Demolishing dry brick pitching in floors, drains etc. includingstacking serviceable material and disposal of unserviceablematerial within 50 metres lead

Quantity11.42

Rate-

Amount -

SH: (B)FENCING(182 Rm + 53.00 m for old fencing=235.00Rm)

Quantity-

Rate-

Amount -

EARTH WORK

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Quantity339.45

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Quantity113.09

Rate-

Amount -

CONCRETE WORKS

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).

Quantity32.55

Rate-

Amount -

RCC WORKS

Quantity-

Rate-

Amount -

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity57.27

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity13.09

Rate-

Amount -

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity9.45

Rate-

Amount -

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level. ( a ) Mild steel

Quantity896.7

Rate-

Amount -

(b)Thermo-Mechanically Treated bars

Quantity7408.99

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.

Quantity233.45

Rate-

Amount -

(b) Columns, Pillars, Piers, Abutments, Posts and Struts.

Quantity229.09

Rate-

Amount -

BRICK WORKS

Quantity-

Rate-

Amount -

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : (i) cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity364.73

Rate-

Amount -

STONE WORKS

Quantity-

Rate-

Amount -

Polygonal rubble masonry/R.R. masonry (uncoursed/brought to courses) squared rubble masonry (uncoursed/brought to courses) with hard stone of approved quality in foundation & plinth in cement mortar 1: 6 (1 cement:6 coarse sand) i/c levelling up with cement concrete 1:6:12 (1 cement:6 coarse sand:12 stone aggregate 20 mm nominal size) at plinth level.

Quantity32.18

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

Quantity558.71

Rate-

Amount -

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

Quantity558.71

Rate-

Amount -

Finishing walls with textured exterior paint of required shade : (i) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Quantity1377.78

Rate-

Amount -

MISCELLANEOUS

Quantity-

Rate-

Amount -

75 cm, high fencing with angle iron post 50 X 50 X 6 mm of 1.24 m long placed at every 2.44 m apart embeded in R.C.C. columns and every 1st, 5th and corner posts to be struted providing with 6 (six) horizontal lines and two diagonals of G.I. barbed wire ( 0.164 kg/m.) between two posts filled and fixed with G.I. staples etc. complete.

Quantity182

Rate-

Amount -

( II )- Construction of Steel Gate

Quantity-

Rate-

Amount -

EARTH WORK

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Quantity171.7

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Quantity1.77

Rate-

Amount -

CONCRETE WORKS

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).

Quantity0.67

Rate-

Amount -

RCC WORKS

Quantity-

Rate-

Amount -

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity1.46

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity0.46

Rate-

Amount -

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level. ( a ) Thermo-Mechanically Treated bars

Quantity146.63

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.

Quantity6.75

Rate-

Amount -

(b) Columns, Pillars, Piers, Abutments, Posts and Struts.

Quantity8.05

Rate-

Amount -

BRICK WORKS

Quantity-

Rate-

Amount -

Brick work with Ist class common burnt clay F.P.S. (non modular)bricks in Superstructure above plinth level upto V level in all shapes and sizes in: (i) (1 Cem: 4 C/Sand)

Quantity1.13

Rate-

Amount -

STEEL WORKS

Quantity-

Rate-

Amount -

Providing and fixing steel gate partly grills and partly M.S. sheet 3.16 mm thick with M.S. angle frame of 65 X 65 X 6 mm including handles, hold fasts, locking arrangment and applying a priming coat of red lead paint ( as per standard design),

Quantity8.9

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

Quantity1.13

Rate-

Amount -

Finishing walls with textured exterior paint of required shade : (i) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Quantity7.32

Rate-

Amount -

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Quantity17.81

Rate-

Amount -

( III )- Repairing of DC Residential building

Quantity-

Rate-

Amount -

SH: (A)DISMANTLING & DEMOLISHING

Quantity-

Rate-

Amount -

Dismantling cement asbestos or other hard board ceiling orpartition walls including stacking of serviceable materials anddisposal of unserviceable materials within 50 metres lead.

Quantity189.72

Rate-

Amount -

Dismantling doors, windows and clerestory windows (steel orwood) shutter including chowkhats, architrave, holdfasts etc.complete and stacking within50 metres lead (i)Of area 3 sq. metres and below

Quantity32

Rate-

Amount -

Dismantling wooden boardings in lining of walls and partitions,excluding supporting members but including stacking within 50metres lead : 15.35.1 Upto 10mm thick

Quantity16.04

Rate-

Amount -

Dismantling tile work in floors and roofs laid in cement mortarincluding stacking material within 50 metre lead.15.23.1 For thickness of tiles above 25 mm and upto 40 mm

Quantity5.18

Rate-

Amount -

SH: (B) REPAIRING BUILDING

Quantity-

Rate-

Amount -

CONCRETE WORKS

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).

Quantity12.78

Rate-

Amount -

Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq. metres and under including cutting the patch in propershape, raking out joints and preparing and plastering the surface ofthe walls complete including disposal of rubbish to thedumpingground within 50 metres lead : 14.1.1 With cement mortar 1:4 (1 cement: 4 fine sand)

Quantity112.5

Rate-

Amount -

WOOD WORKS

Quantity-

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : (a) Local best quality Tolhao wood

Quantity1.71

Rate-

Amount -

Providingandfixingpanelledorpanelledandglazedshuttersfordoors,windowsandclerestorywindowsincludingISImarkedM.Sbutthingesbrightfinishedofrequiredsizewithnecessaryscrews,excludingpanellingwhichwillbepaidforseparately,allcompleteas per direction of Engineer-in-charge.(a) Local best quality Tolhao wood(b)35 mm thick shutters

Quantity70.78

Rate-

Amount -

Providing and fixing M.S. round or square bars with M.S. flats at required spcing in wooden frames of windows and clerestory windows.

Quantity286

Rate-

Amount -

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(a) 300x16 mm

Quantity20

Rate-

Amount -

Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250x10 mm

Quantity40

Rate-

Amount -

(b) 100x10 mm

Quantity48

Rate-

Amount -

Providing and fixing bright finished brass handles with screws etc. complete :(a) 125 mm

Quantity40

Rate-

Amount -

(b) 100 mm

Quantity48

Rate-

Amount -

Providing and fixing bright finished brass hard drawn hooks and eyes (i) 300mm

Quantity36

Rate-

Amount -

Providing and fixing 20mm plank as eave board with :- (a) Tolhao/Uchan wood.

Quantity16.04

Rate-

Amount -

ROOFING AND CEILING

Quantity-

Rate-

Amount -

P/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished wiP/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished with a ccoat of aluminium primer on both sides 7 edges and two coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) T-section 35 X 15 X 1.5 mm size main runners placed 600 mm centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S. rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600 X 1200 mm centre to centre i/c fixing to the frame with C.P brace screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately).

Quantity389.72

Rate-

Amount -

FLOORING

Quantity-

Rate-

Amount -

Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwith grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tilesmust be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet for placingthe tiles gently and easily.(1)Double charge vitrified tile polished finish of size (ii)Size of Tile 600 x 600 mm

Quantity172.69

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

Applying priming coat :- (a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Quantity173.64

Rate-

Amount -

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Quantity173.64

Rate-

Amount -

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Quantity278.99

Rate-

Amount -

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including priming coat with cement primer:- sqm Rs.

Quantity888.71

Rate-

Amount -

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Quantity70.24

Rate-

Amount -

2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.

Quantity91.2

Rate-

Amount -

SH : ( B ) SANITARY ITEMS

Quantity-

Rate-

Amount -

Providing and fixing white vitreous china pedestal type water closet ( European type W.C. pan ) with seat and lid, 10 litre low level white PVC. flushing cistern i/c flush pipe ,manually controlled device (handle lever) conforming to IS 7231 with all fiiting and fixture complete i/c cutting and making good the wall and floor, wherever required: i) W.C pan with ISI marked white solid plastic seat and lid.

Quantity2

Rate-

Amount -

Providing and Fixing wash basin with C.I. brackets, 15mm C.P BRASS PILLAR TAPS, 32mm C.P brass waste of standard patter, i/c painting of fittings and brackets,cutting and making good the walls whereever required a) white vitreous china flat back wash basin size 450x300mm with single 15 mm C.P brass pillar tap.

Quantity2

Rate-

Amount -

Providing and fixing C.P. bib cock of superior quality.

Quantity6

Rate-

Amount -

Providing and fixing brass stop cock of superior quality.

Quantity1

Rate-

Amount -

Providing and fixing 610 x 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws

Quantity3

Rate-

Amount -

Providing and fixing 600 X 450 mm bevelled edge Mirror of superior glass (of approved quality) quality complete with 6mm thick hard board ground fixed to wooden cleat with C.P. brass screws and washers complete.

Quantity3

Rate-

Amount -

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work). a)15 mm diameter

Quantity13.1

Rate-

Amount -

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (External work). a) 32 mm diameter

Quantity20.15

Rate-

Amount -

Providing and fixing 100mm H.C.I. soil, waste & vent pipe

Quantity1.83

Rate-

Amount -

Providing and fixing grating for gully trap or Nahni trap. Satinless steel i) 100 mm nominal diameter.

Quantity2

Rate-

Amount -

Providing and fixing Lead chaulked joints to 100 mm H.C.I. pipes

Quantity6

Rate-

Amount -

Providing and fixing 100 mm terminal guard.

Quantity1

Rate-

Amount -

Providing and fixing 100x100x100mm H.C.I.plain branch of the required degree.

Quantity2

Rate-

Amount -

Providing and fixing C.P. brass shower rose with 12.5 mm or 19 mm inlet.(a) 20 mm diameter. ordinary

Quantity1

Rate-

Amount -

SH: Providing and installing IEI

Quantity-

Rate-

Amount -

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Quantity-

Rate-

Amount -

Group A

Quantity10

Rate-

Amount -

Group B

Quantity12

Rate-

Amount -

Group C

Quantity10

Rate-

Amount -

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC casing & capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Quantity15

Rate-

Amount -

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.

Quantity-

Rate-

Amount -

(a) 2X2.5mm2+1X2.5mm2 earth wire

Quantity100

Rate-

Amount -

(b) 2X4mm2+1X4mm2 earth wire

Quantity100

Rate-

Amount -

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity12

Rate-

Amount -

15/16 amps switch

Quantity10

Rate-

Amount -

3 pin 5/6 amps socket outlet

Quantity12

Rate-

Amount -

6 pin 15/16 amps socket outlet

Quantity10

Rate-

Amount -

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012 complete with connection as rqd. (Havell's)

Quantity24

Rate-

Amount -

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades without regulator etc.as reqd. (Make Bajaj/Usha or Similar)

Quantity7

Rate-

Amount -

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

Quantity7

Rate-

Amount -

S/F call bell/buzzer suitable foe DC/AC single phase 230V complete as reqd.

Quantity1

Rate-

Amount -

S/F bell push modular type complete as reqd.

Quantity1

Rate-

Amount -

S/F 25 amp air-conditioner power plug point i/c 4 modules metal box on surface or in recess 4-modules plate and cover in front, 25 amp modular starter modular socket outlet and 25 amp plug i/c connection etc. as reqd.

Quantity2

Rate-

Amount -

S/F 1.5 ton 5 stars inverter service split air conditioner with stabilizer in built including all accessories for maximum separation of 5mts and connection as reqd. Make Samsung, Model No. AR18TV5PAWK.

Quantity2

Rate-

Amount -

S/F brass batten/angle holder i/c connection etc.as reqd.

Quantity12

Rate-

Amount -

S/F 12W LED bulb

Quantity12

Rate-

Amount -

S/F 305mm sweep exhaust fan complete with accessories i/c connection etc. as reqd.

Quantity2

Rate-

Amount -

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

Quantity2

Rate-

Amount -

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Quantity-

Rate-

Amount -

(a)10 amp MCB "C" Curve

Quantity4

Rate-

Amount -

(a)20 amp MCB "C" Curve

Quantity4

Rate-

Amount -

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

Quantity2

Rate-

Amount -

( IV )- Extention of Bedroom

Quantity-

Rate-

Amount -

EARTH WORK

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Quantity8.95

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Quantity2.98

Rate-

Amount -

Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete with a lead of 15 Km

Quantity31.93

Rate-

Amount -

CONCRETE WORKS

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).

Quantity10.35

Rate-

Amount -

RCC WORKS

Quantity-

Rate-

Amount -

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity1.3

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity1.33

Rate-

Amount -

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity1.6

Rate-

Amount -

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level. ( a ) Thermo-Mechanically Treated bars

Quantity203.65

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.

Quantity14.04

Rate-

Amount -

(b) Columns, Pillars, Piers, Abutments, Posts and Struts.

Quantity21.35

Rate-

Amount -

(c) Lintels, beams, plinth beams, girders, bressumers and cantilevers,with water proof ply 12mm thick.

Quantity18.75

Rate-

Amount -

BRICK WORKS

Quantity-

Rate-

Amount -

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : (i) cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity51.19

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

Quantity51.19

Rate-

Amount -

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

Quantity51.19

Rate-

Amount -

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Quantity16.93

Rate-

Amount -

WOOD WORKS

Quantity-

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : (a) Local best quality Tolhao wood

Quantity0.18

Rate-

Amount -

Providing wood work in trusses, purlins, rafter, posts, post plate wall plate & the like wrought framed hoisted & fixed in position.(a) First class Uningthou wood.

Quantity1.1

Rate-

Amount -

Providingandfixingpanelledorpanelledandglazedshuttersfordoors,windowsandclerestorywindowsincludingISImarkedM.Sbutthingesbrightfinishedofrequiredsizewithnecessaryscrews,excludingpanellingwhichwillbepaidforseparately,allcompleteas per direction of Engineer-in-charge.(a) Local best quality Tolhao wood(b)35 mm thick shutters

Quantity6.75

Rate-

Amount -

Providing and fixing M.S. round or square bars with M.S. flats at required spcing in wooden frames of windows and clerestory windows.

Quantity71.55

Rate-

Amount -

Providing and fixing M.S. round holding down with nuts and wahser plates completes

Quantity2.8

Rate-

Amount -

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10 x15cm 1:3:6 (1 cement : 3 Kanhaighat coarse sand : 6 stone aggrt. 20mm nominal guage).

Quantity12

Rate-

Amount -

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(a) 300x16 mm

Quantity1

Rate-

Amount -

Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250x10 mm

Quantity2

Rate-

Amount -

(b) 100x10 mm

Quantity6

Rate-

Amount -

Providing and fixing bright finished brass handles with screws etc. complete :(a) 125 mm

Quantity2

Rate-

Amount -

(b) 100 mm

Quantity6

Rate-

Amount -

Providing and fixing bright finished brass hard drawn hooks and eyes (i) 300mm

Quantity6

Rate-

Amount -

ROOFING AND CEILING

Quantity-

Rate-

Amount -

P/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished wiP/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished with a ccoat of aluminium primer on both sides 7 edges and two coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) T-section 35 X 15 X 1.5 mm size main runners placed 600 mm centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S. rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600 X 1200 mm centre to centre i/c fixing to the frame with C.P brace screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately).

Quantity72.95

Rate-

Amount -

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with

Quantity71.05

Rate-

Amount -

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (i) Ridges plain (500 - 600mm). (a) Precoated galvanised iron profile sheets 0.50 mm thick.

Quantity7.93

Rate-

Amount -

FLOORING

Quantity-

Rate-

Amount -

Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwith grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tilesmust be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet for placingthe tiles gently and easily.(1)Double charge vitrified tile polished finish of size (ii)Size of Tile 600 x 600 mm

Quantity59.06

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

Applying priming coat :- (a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Quantity20.25

Rate-

Amount -

Applying priming coat :- (b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:

Quantity1.51

Rate-

Amount -

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Quantity6.75

Rate-

Amount -

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Quantity1.51

Rate-

Amount -

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including priming coat with cement primer:- sqm Rs.

Quantity210.5

Rate-

Amount -

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Quantity20.5

Rate-

Amount -

2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.

Quantity34

Rate-

Amount -

SH : ( B ) SANITARY ITEMS

Quantity-

Rate-

Amount -

Providing and fixing white vitreous china pedestal type water closet ( European type W.C. pan ) with seat and lid, 10 litre low level white PVC. flushing cistern i/c flush pipe ,manually controlled device (handle lever) conforming to IS 7231 with all fiiting and fixture complete i/c cutting and making good the wall and floor, wherever required: i) W.C pan with ISI marked white solid plastic seat and lid.

Quantity1

Rate-

Amount -

Providing and Fixing wash basin with C.I. brackets, 15mm C.P BRASS PILLAR TAPS, 32mm C.P brass waste of standard patter, i/c painting of fittings and brackets,cutting and making good the walls whereever required a) white vitreous china flat back wash basin size 450x300mm with single 15 mm C.P brass pillar tap.

Quantity1

Rate-

Amount -

Providing and fixing C.P. bib cock of superior quality.

Quantity3

Rate-

Amount -

Providing and fixing brass stop cock of superior quality.

Quantity1

Rate-

Amount -

Providing and fixing 610 x 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws

Quantity1

Rate-

Amount -

Providing and fixing 600 X 450 mm bevelled edge Mirror of superior glass (of approved quality) quality complete with 6mm thick hard board ground fixed to wooden cleat with C.P. brass screws and washers complete.

Quantity1

Rate-

Amount -

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work). a)15 mm diameter

Quantity4.2

Rate-

Amount -

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (External work). a) 32 mm diameter

Quantity4.2

Rate-

Amount -

Providing and fixing grating for gully trap or Nahni trap. Satinless steel i) 100 mm nominal diameter.

Quantity1

Rate-

Amount -

Providing and fixing Lead chaulked joints to 100 mm H.C.I. pipes

Quantity2

Rate-

Amount -

SH: Providing and installing IEI

Quantity-

Rate-

Amount -

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Quantity-

Rate-

Amount -

Group A

Quantity4

Rate-

Amount -

Group B

Quantity4

Rate-

Amount -

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC casing & capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Quantity4

Rate-

Amount -

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.

Quantity-

Rate-

Amount -

(a) 2X2.5mm2+1X2.5mm2 earth wire

Quantity30

Rate-

Amount -

(b) 2X4mm2+1X4mm2 earth wire

Quantity30

Rate-

Amount -

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity2

Rate-

Amount -

15/16 amps switch

Quantity2

Rate-

Amount -

3 pin 5/6 amps socket outlet

Quantity2

Rate-

Amount -

6 pin 15/16 amps socket outlet

Quantity2

Rate-

Amount -

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012 complete with connection as rqd. (Havell's)

Quantity6

Rate-

Amount -

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades without regulator etc.as reqd. (Make Bajaj/Usha or Similar)

Quantity2

Rate-

Amount -

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

Quantity2

Rate-

Amount -

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

Quantity1

Rate-

Amount -

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Quantity-

Rate-

Amount -

(a)10 amp MCB "C" Curve

Quantity2

Rate-

Amount -

(a)20 amp MCB "C" Curve

Quantity2

Rate-

Amount -

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

Quantity1

Rate-

Amount -

(V) Construction of SM Barrack

Quantity-

Rate-

Amount -

EARTH WORK

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Quantity22.61

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Quantity7.54

Rate-

Amount -

Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete with a lead of 15 Km

Quantity32.64

Rate-

Amount -

CONCRETE WORKS

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).

Quantity18.01

Rate-

Amount -

RCC WORKS

Quantity-

Rate-

Amount -

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity2.63

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity2.29

Rate-

Amount -

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity3.38

Rate-

Amount -

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Mild steel and Medium\Tensile steel bars.

Quantity159.82

Rate-

Amount -

( b ) Thermo-Mechanically Treated bars

Quantity617.13

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.

Quantity24

Rate-

Amount -

(b) Columns, Pillars, Piers, Abutments, Posts and Struts.

Quantity36.6

Rate-

Amount -

(c) Lintels, beams, plinth beams, girders, bressumers and cantilevers,with water proof ply 12mm thick.

Quantity38.56

Rate-

Amount -

BRICK WORKS

Quantity-

Rate-

Amount -

Brick work with Ist class common burnt clay F.P.S. (non modular)bricks in foundation and plinth in: (i) (1 Cem: 4 C/Sand)

Quantity8.83

Rate-

Amount -

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : (i) cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity84.7

Rate-

Amount -

STEELWORKS

Quantity-

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete. (a) Electric resistance or induction butt welded tubes

Quantity1293.12

Rate-

Amount -

Providing & fixing 3 mm thick M.S. sheet door shutter and gate shutter with chaukat frame of 60 X 60 X 5 mm, door frame 50 X 50 X 5 mm bracing and lodging rod, hold fast etc. of 40 X 40 X 5 mm with locking arrangement, hooks and handles with sliding bolts and including the cost of priming coat.

Quantity2.25

Rate-

Amount -

Extra for providing and fixing wind ties of 40x 6mm flat iron section

Quantity58

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

Quantity84.7

Rate-

Amount -

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

Quantity84.7

Rate-

Amount -

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Quantity29.78

Rate-

Amount -

WOOD WORKS

Quantity-

Rate-

Amount -

Steel glazed windows and ventilators of standard rolled steel section joints mitred and welded with 15 x 3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15 x 10 x 10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of 4 mm thick glass panes with glazing clips complete including applying a priming coat of approved steel primer excluding cost of metal beadings and other fittings except necessary hinges or pivots as required.(i) Ready made steel windows (side hung /top hung)

Quantity10.44

Rate-

Amount -

Providing and fixing M.S. round holding down with nuts and wahser plates completes

Quantity22

Rate-

Amount -

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10 x15cm 1:3:6 (1 cement : 3 Kanhaighat coarse sand : 6 stone aggrt. 20mm nominal guage).

Quantity12

Rate-

Amount -

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(a) 300x16 mm

Quantity28

Rate-

Amount -

Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250x10 mm

Quantity14

Rate-

Amount -

Providing and fixing bright finished brass handles with screws etc. complete :(a) 125 mm

Quantity14

Rate-

Amount -

Providing and fixing 20mm plank as eave board with :- (a) Tolhao/Uchan wood.

Quantity13.96

Rate-

Amount -

ROOFING AND CEILING

Quantity-

Rate-

Amount -

P/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished wiP/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished with a ccoat of aluminium primer on both sides 7 edges and two coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) T-section 35 X 15 X 1.5 mm size main runners placed 600 mm centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S. rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600 X 1200 mm centre to centre i/c fixing to the frame with C.P brace screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately).

Quantity93.67

Rate-

Amount -

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with

Quantity134.2

Rate-

Amount -

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (i) Ridges plain (500 - 600mm). (a) Precoated galvanised iron profile sheets 0.50 mm thick.

Quantity15.16

Rate-

Amount -

FLOORING

Quantity-

Rate-

Amount -

Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwith grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tilesmust be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet for placingthe tiles gently and easily.(1)Double charge vitrified tile polished finish of size (ii)Size of Tile 600 x 600 mm

Quantity80.21

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity183.66

Rate-

Amount -

Applying priming coat :- (b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:

Quantity24.64

Rate-

Amount -

Finishing walls with textured exterior paint of required shade : (i) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Quantity91.84

Rate-

Amount -

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Quantity24.64

Rate-

Amount -

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including priming coat with cement primer:- sqm Rs.

Quantity185.51

Rate-

Amount -

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Quantity24.56

Rate-

Amount -

2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.

Quantity48.46

Rate-

Amount -

SH: Providing and insstalling IEI

Quantity-

Rate-

Amount -

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Quantity-

Rate-

Amount -

Group A

Quantity4

Rate-

Amount -

Group B

Quantity12

Rate-

Amount -

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC casing & capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Quantity3

Rate-

Amount -

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.

Quantity-

Rate-

Amount -

(a) 2X2.5mm2+1X2.5mm2 earth wire

Quantity90

Rate-

Amount -

(b) 2X4mm2+1X4mm2 earth wire

Quantity30

Rate-

Amount -

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity3

Rate-

Amount -

3 pin 5/6 amps socket outlet

Quantity3

Rate-

Amount -

S/F brass batten/angle holder i/c connection etc.as reqd.

Quantity12

Rate-

Amount -

S/F 12W LED bulb

Quantity12

Rate-

Amount -

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades without regulator etc.as reqd. (Make Bajaj/Usha or Similar)

Quantity4

Rate-

Amount -

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

Quantity4

Rate-

Amount -

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

Quantity1

Rate-

Amount -

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

Quantity1

Rate-

Amount -

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Quantity-

Rate-

Amount -

(a)10 amp MCB "C" Curve

Quantity2

Rate-

Amount -

(a)20 amp MCB "C" Curve

Quantity2

Rate-

Amount -

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

Quantity1

Rate-

Amount -

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Quantity1

Rate-

Amount -

Extra for using salt and charcoal for pipe electrode as reqd.

Quantity1

Rate-

Amount -

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

Quantity20

Rate-

Amount -

Wiring for submain with 10m2 weather proof twin core Al. cond. Cableand G.I. bearer wire as reqd.

Quantity50

Rate-

Amount -

(VI) Construction of Kitchen cum dining hall

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Quantity45.31

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Quantity15.1

Rate-

Amount -

Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete with a lead of 15 Km

Quantity37.1

Rate-

Amount -

CONCRETE WORKS

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).

Quantity15.93

Rate-

Amount -

RCC WORKS

Quantity-

Rate-

Amount -

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity3.28

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity2.98

Rate-

Amount -

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity3.43

Rate-

Amount -

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Mild steel and Medium\Tensile steel bars.

Quantity193.58

Rate-

Amount -

( b ) Thermo-Mechanically Treated bars

Quantity800.52

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.

Quantity18.27

Rate-

Amount -

(b) Columns, Pillars, Piers, Abutments, Posts and Struts.

Quantity41.95

Rate-

Amount -

(c) Lintels, beams, plinth beams, girders, bressumers and cantilevers,with water proof ply 12mm thick.

Quantity37.41

Rate-

Amount -

BRICK WORKS

Quantity-

Rate-

Amount -

Brick work with Ist class common burnt clay F.P.S. (non modular)bricks in foundation and plinth in: (i) (1 Cem: 4 C/Sand)

Quantity2.2

Rate-

Amount -

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : (i) cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity81.05

Rate-

Amount -

STONE WORKS

Quantity-

Rate-

Amount -

Random rubble masonry with hard stone in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement: 6 Kanhaighat coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : (i) Cement mortar 1:6(1 cement: 6 Kanhaighat coarse sand)

Quantity18.58

Rate-

Amount -

STEELWORKS

Quantity-

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete. (a) Electric resistance or induction butt welded tubes

Quantity898.59

Rate-

Amount -

Extra for providing and fixing wind ties of 40x 6mm flat iron section

Quantity32.28

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

Quantity81.05

Rate-

Amount -

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

Quantity81.05

Rate-

Amount -

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Quantity34.14

Rate-

Amount -

WOOD WORKS

Quantity-

Rate-

Amount -

Providingandfixingpanelledorpanelledandglazedshuttersfordoors,windowsandclerestorywindowsincludingISImarkedM.Sbutthingesbrightfinishedofrequiredsizewithnecessaryscrews,excludingpanellingwhichwillbepaidforseparately,allcompleteas per direction of Engineer-in-charge.(a) Local best quality Tolhao wood (b)35 mm thick shutters

Quantity19.41

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : (a) Local best quality Tolhao wood

Quantity0.6

Rate-

Amount -

25mm wooden planking, tongued and grooved in flooring including fixing with iron screws complete with :a) Ist class teak wood

Quantity7.24

Rate-

Amount -

Providing and fixing M.S. round holding down with nuts and wahser plates completes

Quantity132.09

Rate-

Amount -

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10 x15cm 1:3:6 (1 cement : 3 Kanhaighat coarse sand : 6 stone aggrt. 20mm nominal guage).

Quantity48

Rate-

Amount -

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(a) 300x16 mm

Quantity3

Rate-

Amount -

Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250x10 mm

Quantity6

Rate-

Amount -

(b) 100x10 mm

Quantity50

Rate-

Amount -

Providing and fixing bright finished brass handles with screws etc. complete :(a) 125 mm

Quantity6

Rate-

Amount -

(b) 100 mm

Quantity25

Rate-

Amount -

Providing and fixing bright finished brass hard drawn hooks and eyes (i) 300mm

Quantity25

Rate-

Amount -

Providing and fixing M.S. round holding down with nuts and wahser plates completes

Quantity7.11

Rate-

Amount -

Providing and fixing 20mm plank as eave board with :- (a) Tolhao/Uchan wood.

Quantity10.12

Rate-

Amount -

ROOFING AND CEILING

Quantity-

Rate-

Amount -

P/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished wiP/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished with a ccoat of aluminium primer on both sides 7 edges and two coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) T-section 35 X 15 X 1.5 mm size main runners placed 600 mm centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S. rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600 X 1200 mm centre to centre i/c fixing to the frame with C.P brace screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately).

Quantity61.17

Rate-

Amount -

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with

Quantity89.55

Rate-

Amount -

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (i) Ridges plain (500 - 600mm). (a) Precoated galvanised iron profile sheets 0.50 mm thick.

Quantity11.77

Rate-

Amount -

FLOORING

Quantity-

Rate-

Amount -

Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwith grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tilesmust be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet for placingthe tiles gently and easily.(1)Double charge vitrified tile polished finish of size (ii)Size of Tile 600 x 600 mm

Quantity63.46

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

Applying priming coat :- (a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Quantity60.38

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity85.29

Rate-

Amount -

Applying priming coat :- (b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:

Quantity4.18

Rate-

Amount -

Finishing walls with textured exterior paint of required shade : (i) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Quantity85.29

Rate-

Amount -

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Quantity5.6

Rate-

Amount -

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Quantity60.38

Rate-

Amount -

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including priming coat with cement primer:- sqm Rs.

Quantity107.3

Rate-

Amount -

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Quantity22.45

Rate-

Amount -

2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.

Quantity40

Rate-

Amount -

SH: Providing and installing IEI

Quantity-

Rate-

Amount -

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Quantity-

Rate-

Amount -

Group A

Quantity6

Rate-

Amount -

Group B

Quantity10

Rate-

Amount -

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC casing & capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Quantity5

Rate-

Amount -

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.

Quantity-

Rate-

Amount -

(a) 2X2.5mm2+1X2.5mm2 earth wire

Quantity60

Rate-

Amount -

(b) 2X4mm2+1X4mm2 earth wire

Quantity20

Rate-

Amount -

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity3

Rate-

Amount -

15/16 amps switch

Quantity2

Rate-

Amount -

3 pin 5/6 amps socket outlet

Quantity3

Rate-

Amount -

6 pin 15/16 amps socket outlet

Quantity2

Rate-

Amount -

S/F brass batten/angle holder i/c connection etc.as reqd.

Quantity14

Rate-

Amount -

S/F 12W LED bulb

Quantity14

Rate-

Amount -

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades without regulator etc.as reqd. (Make Bajaj/Usha or Similar)

Quantity2

Rate-

Amount -

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

Quantity2

Rate-

Amount -

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

Quantity1

Rate-

Amount -

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

Quantity1

Rate-

Amount -

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Quantity-

Rate-

Amount -

(a)10 amp MCB "C" Curve

Quantity2

Rate-

Amount -

(a)20 amp MCB "C" Curve

Quantity2

Rate-

Amount -

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

Quantity1

Rate-

Amount -

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Quantity1

Rate-

Amount -

Extra for using salt and charcoal for pipe electrode as reqd.

Quantity1

Rate-

Amount -

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

Quantity20

Rate-

Amount -

Wiring for submain with 10m2 weather proof twin core Al. cond. Cableand G.I. bearer wire as reqd.

Quantity40

Rate-

Amount -

( VII) Construction of Toilet block

Quantity-

Rate-

Amount -

EARTH WORK

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Quantity32.6

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Quantity10.87

Rate-

Amount -

Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete with a lead of 15 Km

Quantity15.38

Rate-

Amount -

CONCRETE WORKS

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).

Quantity7.7

Rate-

Amount -

(b) 1:3:6 (1 cem :3 coarse sand:6 graded stone aggrt.40mm n/size).

Quantity0.96

Rate-

Amount -

(c) 1:2:4 (1 cem :2 coarse sand:4 graded stone aggrt.20mm n/size).

Quantity0.22

Rate-

Amount -

RCC WORKS

Quantity-

Rate-

Amount -

Providing and laying in position ready mixed plain cement concrete or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/ Portland Slag cement, admixture in recommended proportions as per IS:9103 to accelerate / retard setting of concrete,to improve ductility and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of Engineer-in-charge; for the follwing grades of concrete.

Quantity2.47

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity1.35

Rate-

Amount -

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity3.4

Rate-

Amount -

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Mild steel and Medium\Tensile steel bars.

Quantity58.47

Rate-

Amount -

( b ) Thermo-Mechanically Treated bars

Quantity887.7

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.

Quantity16.04

Rate-

Amount -

(b) Columns, Pillars, Piers, Abutments, Posts and Struts.

Quantity23.67

Rate-

Amount -

(c) Lintels, beams, plinth beams, girders, bressumers and cantilevers,with water proof ply 12mm thick.

Quantity30.88

Rate-

Amount -

BRICK WORKS

Quantity-

Rate-

Amount -

Brick work with Ist class common burnt clay F.P.S. (non modular)bricks in foundation and plinth in: (i) (1 Cem: 4 C/Sand)

Quantity14.06

Rate-

Amount -

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : (i) cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity68.95

Rate-

Amount -

STONE WORKS

Quantity-

Rate-

Amount -

Random rubble masonry with hard stone in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement: 6 Kanhaighat coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : (i) Cement mortar 1:6(1 cement: 6 Kanhaighat coarse sand)

Quantity12.88

Rate-

Amount -

STEELWORKS

Quantity-

Rate-

Amount -

Extra for providing and fixing wind ties of 40x 6mm flat iron section

Quantity10.8

Rate-

Amount -

FINISHINGS

Quantity-

Rate-

Amount -

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

Quantity93.7

Rate-

Amount -

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

Quantity93.7

Rate-

Amount -

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Quantity29.32

Rate-

Amount -

WOOD WORKS

Quantity-

Rate-

Amount -

Providingandfixingpanelledorpanelledandglazedshuttersfordoors,windowsandclerestorywindowsincludingISImarkedM.Sbutthingesbrightfinishedofrequiredsizewithnecessaryscrews,excludingpanellingwhichwillbepaidforseparately,allcompleteas per direction of Engineer-in-charge.(a) Local best quality Tolhao wood (b)35 mm thick shutters

Quantity15.28

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : (a) Local best quality Tolhao wood

Quantity0.42

Rate-

Amount -

Providing wood work in trusses, purlins, rafter, posts, post plate wall plate & the like wrought framed hoisted & fixed in position. (c) Uchan/Tairen/Tolhao/Khangra.

Quantity0.52

Rate-

Amount -

25mm wooden planking, tongued and grooved in flooring including fixing with iron screws complete with :a) Ist class teak wood

Quantity3.66

Rate-

Amount -

Providing and fixing M.S. round or square bars with M.S. flats at required spcing in wooden frames of windows and clerestory windows.

Quantity14.77

Rate-

Amount -

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10 x15cm 1:3:6 (1 cement : 3 Kanhaighat coarse sand : 6 stone aggrt. 20mm nominal guage).

Quantity60

Rate-

Amount -

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(a) 300x16 mm

Quantity6

Rate-

Amount -

Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250x10 mm

Quantity26

Rate-

Amount -

(b) 100x10 mm

Quantity19

Rate-

Amount -

Providing and fixing bright finished brass handles with screws etc. complete :(a) 125 mm

Quantity12

Rate-

Amount -

(b) 100 mm

Quantity8

Rate-

Amount -

Providing and fixing bright finished brass hard drawn hooks and eyes (i) 300mm

Quantity12

Rate-

Amount -

Providing and fixing M.S. round holding down with nuts and wahser plates completes

Quantity6

Rate-

Amount -

Providing and fixing 20mm plank as eave board with :- (a) Tolhao/Uchan wood.

Quantity4.3

Rate-

Amount -

ROOFING AND CEILING

Quantity-

Rate-

Amount -

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with

Quantity37.52

Rate-

Amount -

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (i) Ridges plain (500 - 600mm). (a) Precoated galvanised iron profile sheets 0.50 mm thick.

Quantity6.15

Rate-

Amount -

FLOORING

Quantity-

Rate-

Amount -

Providing and fixing 10mm thick acid and/or alkali resistant tilesof approved make and colour using acid and/or alkali resistingmortar bedding and joints filled with acid and/or alkali resistingcement as per IS : 4457 complete as per the direction of Engineer-in- Charge(a)In flooring on a bed of 10 mm thick mortar 1:4(1 acid proof cement: 4 coarse sand)(.i)Acid and alkali resistant tile.

Quantity24.37

Rate-

Amount -

Providing and fixing 10mm thick acid and/or alkali resistant tilesof approved make and colour using acid and/or alkali resistingmortar bedding and joints filled with acid and/or alkali resistingcement as per IS : 4457 complete as per the direction of Engineer-in- Charge(a)In flooring on a bed of 10 mm thick mortar 1:4(1 acid proof cement: 4 coarse sand) (.i)In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 coarse sand).

Quantity42.24

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

Applying priming coat :- (a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Quantity44.07

Rate-

Amount -

Applying priming coat :- (b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:

Quantity0.55

Rate-

Amount -

Finishing walls with textured exterior paint of required shade : (i) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Quantity109.38

Rate-

Amount -

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Quantity4.3

Rate-

Amount -

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Quantity44.07

Rate-

Amount -

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including priming coat with cement primer:- sqm Rs.

Quantity72.4

Rate-

Amount -

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Quantity15.3

Rate-

Amount -

2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.

Quantity25.5

Rate-

Amount -

SH : ( B ) SANITARY ITEMS

Quantity-

Rate-

Amount -

Providing and fixing white vitreous china pedestal type water closet ( European type W.C. pan ) with seat and lid, 10 litre low level white PVC. flushing cistern i/c flush pipe ,manually controlled device (handle lever) conforming to IS 7231 with all fiiting and fixture complete i/c cutting and making good the wall and floor, wherever required: i) W.C pan with ISI marked white solid plastic seat and lid.

Quantity3

Rate-

Amount -

Providing and Fixing wash basin with C.I. brackets, 15mm C.P BRASS PILLAR TAPS, 32mm C.P brass waste of standard patter, i/c painting of fittings and brackets,cutting and making good the walls whereever required a) white vitreous china flat back wash basin size 450x300mm with single 15 mm C.P brass pillar tap.

Quantity2

Rate-

Amount -

Providing and fixing C.P. bib cock of superior quality.

Quantity6

Rate-

Amount -

Providing and fixing brass stop cock of superior quality.

Quantity3

Rate-

Amount -

Providing and fixing 610 x 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws

Quantity6

Rate-

Amount -

Providing and fixing 600 X 450 mm bevelled edge Mirror of superior glass (of approved quality) quality complete with 6mm thick hard board ground fixed to wooden cleat with C.P. brass screws and washers complete.

Quantity5

Rate-

Amount -

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work). a)15 mm diameter

Quantity12.33

Rate-

Amount -

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (External work). a) 32 mm diameter

Quantity25.69

Rate-

Amount -

Providing and fixing 100mm H.C.I. soil, waste & vent pipe

Quantity6.6

Rate-

Amount -

Providing and fixing grating for gully trap or Nahni trap. Satinless steel i) 100 mm nominal diameter.

Quantity6

Rate-

Amount -

Providing and fixing Lead chaulked joints to 100 mm H.C.I. pipes

Quantity12

Rate-

Amount -

Providing and fixing 100 mm terminal guard.

Quantity1

Rate-

Amount -

Providing and fixing 100x100x100mm H.C.I.plain branch of the required degree.

Quantity6

Rate-

Amount -

Providing and fixing C.P. brass shower rose with 12.5 mm or 19 mm inlet.(a) 20 mm diameter. ordinary

Quantity3

Rate-

Amount -

P/F C.I cover with frame for (manhole and chamber) (a) 600x450mm (Heavy duty)

Quantity1

Rate-

Amount -

SH: Providing and installing IEI

Quantity-

Rate-

Amount -

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Quantity-

Rate-

Amount -

Group A

Quantity5

Rate-

Amount -

Group B

Quantity10

Rate-

Amount -

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.

Quantity-

Rate-

Amount -

(a) 2X2.5mm2+1X2.5mm2 earth wire

Quantity50

Rate-

Amount -

(b) 2X4mm2+1X4mm2 earth wire

Quantity30

Rate-

Amount -

S/F brass batten/angle holder i/c connection etc.as reqd.

Quantity12

Rate-

Amount -

S/F 12W LED bulb

Quantity12

Rate-

Amount -

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

Quantity3

Rate-

Amount -

S/F 12"(305mm) dia light duty exhaust fan complete with all accessories(usha/ Bajaj/ Orient)

Quantity3

Rate-

Amount -

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

Quantity1

Rate-

Amount -

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Quantity1

Rate-

Amount -

Extra for using salt and charcoal for pipe electrode as reqd.

Quantity1

Rate-

Amount -

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

Quantity20

Rate-

Amount -

Wiring for submain with 10m2 weather proof twin core Al. cond. Cableand G.I. bearer wire as reqd.

Quantity80

Rate-

Amount -

(VIII) Construction of 15000 litre Water Reservoir

Quantity-

Rate-

Amount -

EARTH WORK

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Quantity25.15

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Quantity8.38

Rate-

Amount -

CONCRETE WORKS

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level

Quantity-

Rate-

Amount -

(b) 1:3:6 (1 cem :3 coarse sand:6 graded stone aggrt.40mm n/size).

Quantity2.75

Rate-

Amount -

(c) 1:2:4 (1 cem :2 coarse sand:4 graded stone aggrt.20mm n/size).

Quantity2.15

Rate-

Amount -

RCC WORKS

Quantity-

Rate-

Amount -

Providing and laying in position ready mixed plain cement concrete or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/ Portland Slag cement, admixture in recommended proportions as per IS:9103 to accelerate / retard setting of concrete,to improve ductility and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of Engineer-in-charge; for the follwing grades of concrete.

Quantity4.75

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity3.65

Rate-

Amount -

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity1.7

Rate-

Amount -

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Thermo-Mechanically Treated bars

Quantity1471.46

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.

Quantity5.25

Rate-

Amount -

(b) Suspended floors, roofs, landings, balconies and access platform,with water proof ply 12mm thick.

Quantity66.16

Rate-

Amount -

(c) Edges of slab and breaks in floors and walls (i) Under 20cm wide

Quantity16.2

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Quantity22.77

Rate-

Amount -

FLOORING

Quantity-

Rate-

Amount -

Providing and fixing 10mm thick acid and/or alkali resistant tilesof approved make and colour using acid and/or alkali resistingmortar bedding and joints filled with acid and/or alkali resistingcement as per IS : 4457 complete as per the direction of Engineer-in- Charge(a)In flooring on a bed of 10 mm thick mortar 1:4(1 acid proof cement: 4 coarse sand)(.i)Acid and alkali resistant tile.

Quantity13.5

Rate-

Amount -

Providing and fixing 10mm thick acid and/or alkali resistant tilesof approved make and colour using acid and/or alkali resistingmortar bedding and joints filled with acid and/or alkali resistingcement as per IS : 4457 complete as per the direction of Engineer-in- Charge(a)In flooring on a bed of 10 mm thick mortar 1:4(1 acid proof cement: 4 coarse sand) (.i)In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 coarse sand).

Quantity24.75

Rate-

Amount -

SH : ( B ) ELEVATED PLATEFORM

Quantity-

Rate-

Amount -

EARTH WORK

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Quantity1.35

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Quantity0.45

Rate-

Amount -

CONCRETE WORKS

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).

Quantity0.34

Rate-

Amount -

RCC WORKS

Quantity-

Rate-

Amount -

Providing and laying in position ready mixed plain cement concrete or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/ Portland Slag cement, admixture in recommended proportions as per IS:9103 to accelerate / retard setting of concrete,to improve ductility and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of Engineer-in-charge; for the follwing grades of concrete.

Quantity0.71

Rate-

Amount -

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Mild steel and Medium\Tensile steel bars.

Quantity4.58

Rate-

Amount -

( b ) Thermo-Mechanically Treated bars

Quantity7.81

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.

Quantity5.76

Rate-

Amount -

STEELWORKS

Quantity-

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete. (a) Electric resistance or induction butt welded tubes

Quantity559.41

Rate-

Amount -

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level.(i)1000 litres net capacity storage tanks

Quantity1

Rate-

Amount -

(IX) SH: Construction of Sentry Tower (2 nos)

Quantity-

Rate-

Amount -

EARTH WORK

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Quantity30.38

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Quantity10.12

Rate-

Amount -

Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete with a lead of 15 Km

Quantity1.94

Rate-

Amount -

CONCRETE WORKS

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).

Quantity4.52

Rate-

Amount -

RCC WORKS

Quantity-

Rate-

Amount -

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity6.52

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity3.56

Rate-

Amount -

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity4.52

Rate-

Amount -

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Mild steel and Medium\Tensile steel bars.

Quantity291.88

Rate-

Amount -

( b ) Thermo-Mechanically Treated bars

Quantity1217.5

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.

Quantity38.4

Rate-

Amount -

(b) Columns, Pillars, Piers, Abutments, Posts and Struts.

Quantity51.5

Rate-

Amount -

(c) Lintels, beams, plinth beams, girders, bressumers and cantilevers,with water proof ply 12mm thick.

Quantity28.84

Rate-

Amount -

(d) Suspended floors, roofs, landings, balconies and access platform,with water proof ply 12mm thick.

Quantity11.9

Rate-

Amount -

(e) Edges of slab and breaks in floors and walls (i) Under 20cm wide

Quantity19.72

Rate-

Amount -

BRICK WORKS

Quantity-

Rate-

Amount -

Brick work with Ist class common burnt clay F.P.S. (non modular)bricks in foundation and plinth in: (i) (1 Cem: 4 C/Sand)

Quantity17.42

Rate-

Amount -

STONE WORKS

Quantity-

Rate-

Amount -

Random rubble masonry with hard stone in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement: 6 Kanhaighat coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : (i) Cement mortar 1:6(1 cement: 6 Kanhaighat coarse sand)

Quantity5.84

Rate-

Amount -

STEELWORKS

Quantity-

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete. (a) Electric resistance or induction butt welded tubes

Quantity918.72

Rate-

Amount -

Extra for providing and fixing wind ties of 40x 6mm flat iron section

Quantity30.4

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

Quantity66.94

Rate-

Amount -

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

Quantity66.94

Rate-

Amount -

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Quantity3.6

Rate-

Amount -

WOOD WORKS

Quantity-

Rate-

Amount -

Providing wood work in trusses, purlins, rafter, posts, post plate wall plate & the like wrought framed hoisted & fixed in position. (c) Uchan/Tairen/Tolhao/Khangra.

Quantity1.14

Rate-

Amount -

Providing and fixing steel gate partly grills and partly M.S. sheet 3.16 mm thick with M.S. angle frame of 65 X 65 X 6 mm including handles, hold fasts, locking arrangment and applying a priming coat of red lead paint ( as per standard design),

Quantity3

Rate-

Amount -

Supplying 40 mm X 3 mm X 275 mm F.B. twisted plate i/c cost of bolts & nuts.

Quantity32

Rate-

Amount -

Providing and fixing M.S. round holding down with nuts and wahser plates completes

Quantity31.86

Rate-

Amount -

Providing and fixing 20mm plank as eave board with :- (a) Tolhao/Uchan wood.

Quantity8.52

Rate-

Amount -

ROOFING AND CEILING

Quantity-

Rate-

Amount -

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with

Quantity33.72

Rate-

Amount -

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (i) Ridges plain (500 - 600mm). (a) Precoated galvanised iron profile sheets 0.50 mm thick.

Quantity23.28

Rate-

Amount -

FLOORING

Quantity-

Rate-

Amount -

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4graded stone aggregate) finished with a floating coat of neatcement including cement slurry, but excluding the cost of nosingof steps etc. complete.40mm thick with 20mm nominal size stone aggregate

Quantity21.18

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

Applying priming coat :- (a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Quantity17.04

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity133.88

Rate-

Amount -

Applying priming coat :- (b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:

Quantity16.84

Rate-

Amount -

Finishing walls with textured exterior paint of required shade : (i) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Quantity133.88

Rate-

Amount -

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Quantity61.7

Rate-

Amount -

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Quantity17.04

Rate-

Amount -

SH: Providing and installing IEI

Quantity-

Rate-

Amount -

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Quantity-

Rate-

Amount -

Group A

Quantity2

Rate-

Amount -

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC casing & capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Quantity1

Rate-

Amount -

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.

Quantity-

Rate-

Amount -

(a) 2X2.5mm2+1X2.5mm2 earth wire

Quantity10

Rate-

Amount -

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity1

Rate-

Amount -

3 pin 5/6 amps socket outlet

Quantity1

Rate-

Amount -

S/F brass batten/angle holder i/c connection etc.as reqd.

Quantity1

Rate-

Amount -

S/F 12W LED bulb

Quantity1

Rate-

Amount -

S/F50 W LED 5000K energy saving IP 65 Flood Light luminaries with high power COB LED as light source Havell's LHEPBFUEIN6W050

Quantity1

Rate-

Amount -

Wiring for submain with 10m2 weather proof twin core Al. cond. Cableand G.I. bearer wire as reqd.

Quantity30

Rate-

Amount -

(X) Construction of Light vehicle Garrage

Quantity-

Rate-

Amount -

EARTH WORK

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Quantity44.57

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Quantity14.86

Rate-

Amount -

Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete with a lead of 15 Km

Quantity31.65

Rate-

Amount -

CONCRETE WORKS

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).

Quantity14.1

Rate-

Amount -

RCC WORKS

Quantity-

Rate-

Amount -

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity2.52

Rate-

Amount -

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity4.17

Rate-

Amount -

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Thermo-Mechanically Treated bars

Quantity465.78

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.

Quantity21

Rate-

Amount -

(c) Lintels, beams, plinth beams, girders, bressumers and cantilevers,with water proof ply 12mm thick.

Quantity24.52

Rate-

Amount -

STONE WORKS

Quantity-

Rate-

Amount -

Random rubble masonry with hard stone in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement: 6 Kanhaighat coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : (i) Cement mortar 1:6(1 cement: 6 Kanhaighat coarse sand)

Quantity15.59

Rate-

Amount -

STEELWORKS

Quantity-

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete. (a) Electric resistance or induction butt welded tubes

Quantity1057.46

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Quantity13.88

Rate-

Amount -

ROOFING AND CEILING WORK

Quantity-

Rate-

Amount -

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with

Quantity81.03

Rate-

Amount -

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (i) Ridges plain (500 - 600mm). (a) Precoated galvanised iron profile sheets 0.50 mm thick.

Quantity11.98

Rate-

Amount -

FLOORING

Quantity-

Rate-

Amount -

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4graded stone aggregate) finished with a floating coat of neatcement including cement slurry, but excluding the cost of nosingof steps etc. complete.40mm thick with 20mm nominal size stone aggregate

Quantity66.23

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Quantity103.04

Rate-

Amount -

25mm wooden planking, tongued and grooved in flooring including fixing with iron screws complete with :a) Ist class teak wood

Quantity6.42

Rate-

Amount -

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Quantity17.93

Rate-

Amount -

2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.

Quantity29.88

Rate-

Amount -

Providing and fixing 20mm plank as eave board with :- (a) Tolhao/Uchan wood.

Quantity6.73

Rate-

Amount -

Providing and fixing M.S. round holding down with nuts and wahser plates completes

Quantity28.44

Rate-

Amount -

SH: Providing and installing IEI

Quantity-

Rate-

Amount -

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Quantity-

Rate-

Amount -

Group A

Quantity2

Rate-

Amount -

Group B

Quantity4

Rate-

Amount -

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC casing & capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Quantity2

Rate-

Amount -

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.

Quantity-

Rate-

Amount -

(a) 2X2.5mm2+1X2.5mm2 earth wire

Quantity50

Rate-

Amount -

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity1

Rate-

Amount -

15/16 amps switch

Quantity1

Rate-

Amount -

3 pin 5/6 amps socket outlet

Quantity1

Rate-

Amount -

6 pin 15/16 amps socket outlet

Quantity1

Rate-

Amount -

S/F brass batten/angle holder i/c connection etc.as reqd.

Quantity4

Rate-

Amount -

S/F 12W LED bulb

Quantity4

Rate-

Amount -

S/F50 W LED 5000K energy saving IP 65 Flood Light luminaries with high power COB LED as light source Havell's LHEPBFUEIN6W050

Quantity1

Rate-

Amount -

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

Quantity1

Rate-

Amount -

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

Quantity1

Rate-

Amount -

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Quantity-

Rate-

Amount -

(a)10 amp MCB "C" Curve

Quantity2

Rate-

Amount -

(a)20 amp MCB "C" Curve

Quantity2

Rate-

Amount -

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

Quantity1

Rate-

Amount -

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Quantity1

Rate-

Amount -

Extra for using salt and charcoal for pipe electrode as reqd.

Quantity1

Rate-

Amount -

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

Quantity10

Rate-

Amount -

Wiring for submain with 10m2 weather proof twin core Al. cond. Cableand G.I. bearer wire as reqd.

Quantity30

Rate-

Amount -

(XI) Construction of Hall

Quantity-

Rate-

Amount -

EARTH WORK

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Quantity50.97

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Quantity16.99

Rate-

Amount -

Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete with a lead of 15 Km

Quantity27.89

Rate-

Amount -

CONCRETE WORKS

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).

Quantity25.17

Rate-

Amount -

RCC WORKS

Quantity-

Rate-

Amount -

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity4.09

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity3.2

Rate-

Amount -

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Quantity9.3

Rate-

Amount -

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Thermo-Mechanically Treated bars

Quantity2305.24

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for:(a) Foundation footings, bases of columns etc. and mass concrete.

Quantity29.76

Rate-

Amount -

(b) Lintels, beams, plinth beams, girders, bressumers and cantilevers,with water proof ply 12mm thick.

Quantity81.71

Rate-

Amount -

(c) Columns, Pillars, Piers, Abutments, Posts and Struts.

Quantity56.32

Rate-

Amount -

STONE WORKS

Quantity-

Rate-

Amount -

Random rubble masonry with hard stone in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement: 6 Kanhaighat coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : (i) Cement mortar 1:6(1 cement: 6 Kanhaighat coarse sand)

Quantity20.16

Rate-

Amount -

BRICK WORKS

Quantity-

Rate-

Amount -

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : (i) cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity114.81

Rate-

Amount -

WOOD WORKS

Quantity-

Rate-

Amount -

Providing wood work in trusses, purlins, rafter, posts, post plate wall plate & the like wrought framed hoisted & fixed in position. (c) Uchan/Tairen/Tolhao/Khangra.

Quantity1.14

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : (a) Local best quality Tolhao wood

Quantity1.07

Rate-

Amount -

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required sizes with necessary screws..(a) Local best quality Tolhao wood .(35mm thick).

Quantity31.17

Rate-

Amount -

Providing and fixing M.S. round or square bars with M.S. flats at required spcing in wooden frames of windows and clerestory windows.

Quantity290.59

Rate-

Amount -

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10 x15cm 1:3:6 (1 cement : 3 Kanhaighat coarse sand : 6 stone aggrt. 20mm nominal guage).

Quantity122

Rate-

Amount -

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(a) 300x16 mm

Quantity2

Rate-

Amount -

Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250x10 mm

Quantity4

Rate-

Amount -

(b) 1000x10 mm

Quantity110

Rate-

Amount -

Providing and fixing bright finished brass handles with screws etc. complete :(a) 125 mm

Quantity4

Rate-

Amount -

(b) 100 mm

Quantity55

Rate-

Amount -

Providing and fixing 20mm plank as eave board with :- (a) Tolhao/Uchan wood.

Quantity11.28

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand).

Quantity114.81

Rate-

Amount -

15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand).

Quantity114.81

Rate-

Amount -

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Quantity14.63

Rate-

Amount -

FLOORING

Quantity-

Rate-

Amount -

Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwith grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tilesmust be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet for placingthe tiles gently and easily.(1)Double charge vitrified tile polished finish of size (ii)Size of Tile 600 x 600 mm

Quantity139.45

Rate-

Amount -

ROOFING AND CEILING WORK

Quantity-

Rate-

Amount -

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with

Quantity170.03

Rate-

Amount -

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (i) Ridges plain (500 - 600mm). (a) Precoated galvanised iron profile sheets 0.50 mm thick.

Quantity16.46

Rate-

Amount -

P/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished wiP/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished with a ccoat of aluminium primer on both sides 7 edges and two coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) T-section 35 X 15 X 1.5 mm size main runners placed 600 mm centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S. rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600 X 1200 mm centre to centre i/c fixing to the frame with C.P brace screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately).

Quantity171.13

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

Applying priming coat :- (b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:

Quantity46.55

Rate-

Amount -

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Quantity46.55

Rate-

Amount -

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Quantity9.2

Rate-

Amount -

White washing with lime to give an even shade: —(a)New work (three or more coats)

Quantity229.62

Rate-

Amount -

Colour washing such as green, blue or buff to give an even shade :(a)Newwork(twoormorecoats)withabasecoatofwhitewashingwith lime

Quantity229.62

Rate-

Amount -

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Quantity30.18

Rate-

Amount -

2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.

Quantity50.3

Rate-

Amount -

SH: Providing and installing IEI

Quantity-

Rate-

Amount -

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Quantity-

Rate-

Amount -

Group A

Quantity6

Rate-

Amount -

Group B

Quantity10

Rate-

Amount -

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC casing & capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Quantity5

Rate-

Amount -

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.

Quantity-

Rate-

Amount -

(a) 2X2.5mm2+1X2.5mm2 earth wire

Quantity60

Rate-

Amount -

(b) 2X4mm2+1X4mm2 earth wire

Quantity20

Rate-

Amount -

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity3

Rate-

Amount -

15/16 amps switch

Quantity2

Rate-

Amount -

3 pin 5/6 amps socket outlet

Quantity3

Rate-

Amount -

6 pin 15/16 amps socket outlet

Quantity2

Rate-

Amount -

S/F brass batten/angle holder i/c connection etc.as reqd.

Quantity14

Rate-

Amount -

S/F 12W LED bulb

Quantity14

Rate-

Amount -

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades without regulator etc.as reqd. (Make Bajaj/Usha or Similar)

Quantity2

Rate-

Amount -

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

Quantity2

Rate-

Amount -

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

Quantity1

Rate-

Amount -

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

Quantity1

Rate-

Amount -

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Quantity-

Rate-

Amount -

(a)10 amp MCB "C" Curve

Quantity2

Rate-

Amount -

(a)20 amp MCB "C" Curve

Quantity2

Rate-

Amount -

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

Quantity1

Rate-

Amount -

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Quantity1

Rate-

Amount -

Extra for using salt and charcoal for pipe electrode as reqd.

Quantity1

Rate-

Amount -

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

Quantity20

Rate-

Amount -

Wiring for submain with 10m2 weather proof twin core Al. cond. Cableand G.I. bearer wire as reqd.

Quantity40

Rate-

Amount -

DC OFFICE CHURACHANDPUR

Quantity-

Rate-

Amount -

(XII) GROUND FLO

Quantity-

Rate-

Amount -

SH: (A)DISMANTLING & DEMOLISHING

Quantity-

Rate-

Amount -

Dismantling doors, windows and clerestory windows (steel orwood) shutter including chowkhats, architrave, holdfasts etc.complete and stacking within50 metres lead (i)Of area 3 sq. metres and below

Quantity57

Rate-

Amount -

Dismantling tile work in floors and roofs laid in cement mortarincluding stacking material within 50 metre lead.15.23.1 For thickness of tiles above 25 mm and upto 40 mm

Quantity524.79

Rate-

Amount -

Dismantling cement asbestos or other hard board ceiling orpartition walls including stacking of serviceable materials anddisposal of unserviceable materials within 50 metres lead.

Quantity524.79

Rate-

Amount -

Demolishing R.C.C. work manually/ by mechanical means includingstacking of steel bars and disposal of unserviceable material within50 metres lead as per direction of Engineer - in- charge.

Quantity3.15

Rate-

Amount -

Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq. metres and under including cutting the patch in propershape, raking out joints and preparing and plastering the surface ofthe walls complete including disposal of rubbish to thedumpingground within 50 metres lead : (a) With cement mortar 1:4 (1 cement: 4 fine sand)

Quantity1512.92

Rate-

Amount -

SH: (B) REPAIRING BUILDING

Quantity-

Rate-

Amount -

CONCRETE WORKS

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).

Quantity52.49

Rate-

Amount -

WOOD WORKS

Quantity-

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : (a) Local best quality Teak wood

Quantity5.38

Rate-

Amount -

Providingandfixingpanelledorpanelledandglazedshuttersfordoors,windowsandclerestorywindowsincludingISImarkedM.Sbutthingesbrightfinishedofrequiredsizewithnecessaryscrews,excludingpanellingwhichwillbepaidforseparately,allcompleteas per direction of Engineer-in-charge.(a) Local best quality Teak wood

Quantity104.72

Rate-

Amount -

Providing and fixing M.S. round or square bars with M.S. flats at required spcing in wooden frames of windows and clerestory windows.

Quantity259.71

Rate-

Amount -

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10 x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

Quantity336

Rate-

Amount -

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(a) 300x16 mm

Quantity28

Rate-

Amount -

Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250x10 mm

Quantity168

Rate-

Amount -

(b) 100x10 mm

Quantity168

Rate-

Amount -

Providing and fixing bright finished brass handles with screws etc. complete :(a) 125 mm

Quantity112

Rate-

Amount -

(b) 100 mm

Quantity112

Rate-

Amount -

Providing and fixing bright finished brass hard drawn hooks and eyes (i) 300mm

Quantity112

Rate-

Amount -

ROOFING AND CEILING

Quantity-

Rate-

Amount -

Providing and fixing at all height false ceiling including providingand fixing of frame work made of special sections, power pressedfrom M.S. sheet and galvanised with zinc coating of 120 gms/ sqm(both sided inclusive) as per IS : 277 and consisting of angle cleatsof size 25mm wide x 1.6mm thick with flanges of 27mm and37mm, at 1200mm centre to centre, one flange fixed to the ceilingwith dash fastener 12.5mm diax50mm long with 6mm diabolts,other flange of cleat fixed to the angle hangers of25x25x0.55mm of required length with nuts and bolts of requiredsize and the other end of the angle hanger fixed with intermediateG.I. channels 45x15x0.9mm running at the spacing of 1200mmcentre to centre, to which the ceiling section 0.5mm thick bottomwedge of 80mm with tapered flanges of 26mm each having clips of10.5mm at 450mm centre to centre, shall be fixed in a directionperpendicular to G.I. intermediate channel with connecting clipsmade out of 2.64mm diax230mm long G.I. wire at every junction,including fixing perimeter channels 0.5mm thick 27mm high havingflanges of 20mm and 30mm long, the perimeter of ceiling fixed towall/partition with the help of rawl plugs at 450mm centre, with25mm long drive-all screws @ 230mm interval, including fixing ofgypsum board to ceiling section and perimeter channel with thehelp of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing andfinishng to a flush finish of tapered and square edges of the boardwith recommended jointing compound,jointing tapes, finishingwith jointing compund in 3 layers covering upto 150 mm on bothsides of joint and two coats of primer suitable for board,all as permanufacturer's specification and also including the cost of makingopenings for light fittings, grills, diffusers, cutouts made withframe of perimeter channels suitably fixed, all complete as perdrawings, and specification and direction of the Engineer in Chargebut excluding the cost of painting with :(i) Fully Perforated Gypsum Plaster Board of size 1200 x 2400 x 12.5mm having approx. 15% perforated size and pattern as approvedby the Engineer-in-charge and as per manufacter's specification,with all 4 sides tapered and backed by acoustical tissue with NRCvalue not less than 0.60.

Quantity524.79

Rate-

Amount -

FLOORING

Quantity-

Rate-

Amount -

Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwith grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tilesmust be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet for placingthe tiles gently and easily. (a)Double charge vitrified tile polished finish of size(i)Size of Tile 600 x 600 mm

Quantity548.34

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacture) , with water absorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (! Cement :3 3 coarse sand), joining with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. (i) Size of Tile 600X600mm

Quantity220.44

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

Applying priming coat :- (a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Quantity209.45

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity2621.95

Rate-

Amount -

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Quantity209.45

Rate-

Amount -

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Quantity5.24

Rate-

Amount -

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including priming coat with cement primer:- sqm Rs.

Quantity1248.01

Rate-

Amount -

Finishing walls with textured exterior paint of required shade : (i) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Quantity1373.94

Rate-

Amount -

SH: Providing and installing IEI

Quantity-

Rate-

Amount -

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Quantity-

Rate-

Amount -

Group A

Quantity30

Rate-

Amount -

Group B

Quantity40

Rate-

Amount -

Group C

Quantity15

Rate-

Amount -

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC casing & capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Quantity65

Rate-

Amount -

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.

Quantity-

Rate-

Amount -

(a) 2X2.5mm2+1X2.5mm2 earth wire

Quantity100

Rate-

Amount -

(b) 2X4mm2+1X4mm2 earth wire

Quantity100

Rate-

Amount -

(c) 2X10mm2+1X10mm2 earth wire

Quantity50

Rate-

Amount -

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity40

Rate-

Amount -

15/16 amps switch

Quantity25

Rate-

Amount -

3 pin 5/6 amps socket outlet

Quantity40

Rate-

Amount -

6 pin 15/16 amps socket outlet

Quantity25

Rate-

Amount -

70mm2 3.5 core PVC ins.(heavy duty) Al.cond.armoured cable of 1.1KV grade of size not exceeding 25mm2 but not exceeding 125mm2 direct in ground i/c excavation sand, cushioning protective covering & refilling etc.as reqd.

Quantity50

Rate-

Amount -

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

Quantity-

Rate-

Amount -

1. 200 amp. TPN on load changeover switch - 1 No.

Quantity-

Rate-

Amount -

2. 200 amp. TPN bus bar chamber - 1 No.

Quantity-

Rate-

Amount -

3. 125 amp. TPN thermal adjustable MCCB - 4 Nos.

Quantity-

Rate-

Amount -

4. Prewired module Ammeter, voltmeter with selector switch and indicator lamp (Digital)

Quantity1

Rate-

Amount -

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012 complete with connection as rqd. (Havell's)

Quantity37

Rate-

Amount -

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades without regulator etc.as reqd. (Make Bajaj/Usha or Similar)

Quantity18

Rate-

Amount -

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

Quantity18

Rate-

Amount -

S/F call bell/buzzer suitable foe DC/AC single phase 230V complete as reqd.

Quantity2

Rate-

Amount -

S/F bell push modular type complete as reqd.

Quantity2

Rate-

Amount -

S/F 25 amp air-conditioner power plug point i/c 4 modules metal box on surface or in recess 4-modules plate and cover in front, 25 amp modular starter modular socket outlet and 25 amp plug i/c connection etc. as reqd.

Quantity2

Rate-

Amount -

S/F 1.5 ton 5 stars inverter service split air conditioner with stabilizer in built including all accessories for maximum separation of 5mts and connection as reqd. Make Samsung, Model No. AR18TV5PAWK.

Quantity2

Rate-

Amount -

S/F brass batten/angle holder i/c connection etc.as reqd.

Quantity27

Rate-

Amount -

S/F 12W LED bulb

Quantity27

Rate-

Amount -

S/F surface/ pendent mounting 1 x 18 W LED lamp channel luminories complete with all accersories connection etc. as required

Quantity18

Rate-

Amount -

S/F 305mm sweep exhaust fan complete with accessories i/c connection etc. as reqd.

Quantity10

Rate-

Amount -

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

Quantity6

Rate-

Amount -

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

Quantity10

Rate-

Amount -

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Quantity-

Rate-

Amount -

(a)10 amp MCB "C" Curve

Quantity15

Rate-

Amount -

(a)20 amp MCB "C" Curve

Quantity25

Rate-

Amount -

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

Quantity10

Rate-

Amount -

(XIII) FIRST FLOOR

Quantity-

Rate-

Amount -

SH: (A)DISMANTLING & DEMOLISHINGR

Quantity-

Rate-

Amount -

Dismantling doors, windows and clerestory windows (steel orwood) shutter including chowkhats, architrave, holdfasts etc.complete and stacking within50 metres lead (i)Of area 3 sq. metres and below

Quantity57

Rate-

Amount -

Dismantling tile work in floors and roofs laid in cement mortarincluding stacking material within 50 metre lead.15.23.1 For thickness of tiles above 25 mm and upto 40 mm

Quantity524.79

Rate-

Amount -

Dismantling cement asbestos or other hard board ceiling orpartition walls including stacking of serviceable materials anddisposal of unserviceable materials within 50 metres lead.

Quantity524.79

Rate-

Amount -

Demolishing R.C.C. work manually/ by mechanical means includingstacking of steel bars and disposal of unserviceable material within50 metres lead as per direction of Engineer - in- charge.

Quantity3.15

Rate-

Amount -

Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq. metres and under including cutting the patch in propershape, raking out joints and preparing and plastering the surface ofthe walls complete including disposal of rubbish to thedumpingground within 50 metres lead : (a) With cement mortar 1:4 (1 cement: 4 fine sand)

Quantity1512.92

Rate-

Amount -

SH: (B) REPAIRING BUILDING

Quantity-

Rate-

Amount -

CONCRETE WORKS

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).

Quantity52.49

Rate-

Amount -

WOOD WORKSG

Quantity-

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : (a) Local best quality Teak wood

Quantity5.38

Rate-

Amount -

Providingandfixingpanelledorpanelledandglazedshuttersfordoors,windowsandclerestorywindowsincludingISImarkedM.Sbutthingesbrightfinishedofrequiredsizewithnecessaryscrews,excludingpanellingwhichwillbepaidforseparately,allcompleteas per direction of Engineer-in-charge.(a) Local best quality Teak wood

Quantity104.72

Rate-

Amount -

Providing and fixing M.S. round or square bars with M.S. flats at required spcing in wooden frames of windows and clerestory windows.

Quantity259.71

Rate-

Amount -

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10 x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

Quantity336

Rate-

Amount -

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(a) 300x16 mm

Quantity28

Rate-

Amount -

Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250x10 mm

Quantity168

Rate-

Amount -

(b) 100x10 mm

Quantity168

Rate-

Amount -

Providing and fixing bright finished brass handles with screws etc. complete :(a) 125 mm

Quantity112

Rate-

Amount -

(b) 100 mm

Quantity112

Rate-

Amount -

Providing and fixing bright finished brass hard drawn hooks and eyes (i) 300mm

Quantity112

Rate-

Amount -

ROOFING AND CEILING

Quantity-

Rate-

Amount -

Providing and fixing at all height false ceiling including providingand fixing of frame work made of special sections, power pressedfrom M.S. sheet and galvanised with zinc coating of 120 gms/ sqm(both sided inclusive) as per IS : 277 and consisting of angle cleatsof size 25mm wide x 1.6mm thick with flanges of 27mm and37mm, at 1200mm centre to centre, one flange fixed to the ceilingwith dash fastener 12.5mm diax50mm long with 6mm diabolts,other flange of cleat fixed to the angle hangers of25x25x0.55mm of required length with nuts and bolts of requiredsize and the other end of the angle hanger fixed with intermediateG.I. channels 45x15x0.9mm running at the spacing of 1200mmcentre to centre, to which the ceiling section 0.5mm thick bottomwedge of 80mm with tapered flanges of 26mm each having clips of10.5mm at 450mm centre to centre, shall be fixed in a directionperpendicular to G.I. intermediate channel with connecting clipsmade out of 2.64mm diax230mm long G.I. wire at every junction,including fixing perimeter channels 0.5mm thick 27mm high havingflanges of 20mm and 30mm long, the perimeter of ceiling fixed towall/partition with the help of rawl plugs at 450mm centre, with25mm long drive-all screws @ 230mm interval, including fixing ofgypsum board to ceiling section and perimeter channel with thehelp of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing andfinishng to a flush finish of tapered and square edges of the boardwith recommended jointing compound,jointing tapes, finishingwith jointing compund in 3 layers covering upto 150 mm on bothsides of joint and two coats of primer suitable for board,all as permanufacturer's specification and also including the cost of makingopenings for light fittings, grills, diffusers, cutouts made withframe of perimeter channels suitably fixed, all complete as perdrawings, and specification and direction of the Engineer in Chargebut excluding the cost of painting with :(i) Fully Perforated Gypsum Plaster Board of size 1200 x 2400 x 12.5mm having approx. 15% perforated size and pattern as approvedby the Engineer-in-charge and as per manufacter's specification,with all 4 sides tapered and backed by acoustical tissue with NRCvalue not less than 0.60.

Quantity524.79

Rate-

Amount -

FLOORING

Quantity-

Rate-

Amount -

Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwith grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tilesmust be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet for placingthe tiles gently and easily. (a)Double charge vitrified tile polished finish of size(i)Size of Tile 600 x 600 mm

Quantity548.34

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacture) , with water absorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (! Cement :3 3 coarse sand), joining with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. (i) Size of Tile 600X600mm

Quantity220.44

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

Applying priming coat :- (a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Quantity209.45

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity2621.95

Rate-

Amount -

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Quantity209.45

Rate-

Amount -

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Quantity5.24

Rate-

Amount -

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including priming coat with cement primer:- sqm Rs.

Quantity1248.01

Rate-

Amount -

Finishing walls with textured exterior paint of required shade : (i) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Quantity1373.94

Rate-

Amount -

SH: Providing andd installing IEI

Quantity-

Rate-

Amount -

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Quantity-

Rate-

Amount -

Group A

Quantity15

Rate-

Amount -

Group B

Quantity30

Rate-

Amount -

Group C

Quantity15

Rate-

Amount -

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC casing & capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Quantity50

Rate-

Amount -

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.

Quantity-

Rate-

Amount -

(a) 2X2.5mm2+1X2.5mm2 earth wire

Quantity100

Rate-

Amount -

(b) 2X4mm2+1X4mm2 earth wire

Quantity100

Rate-

Amount -

(c) 2X10mm2+1X10mm2 earth wire

Quantity50

Rate-

Amount -

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity28

Rate-

Amount -

15/16 amps switch

Quantity22

Rate-

Amount -

3 pin 5/6 amps socket outlet

Quantity28

Rate-

Amount -

6 pin 15/16 amps socket outlet

Quantity22

Rate-

Amount -

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012 complete with connection as rqd. (Havell's)

Quantity60

Rate-

Amount -

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades without regulator etc.as reqd. (Make Bajaj/Usha or Similar)

Quantity17

Rate-

Amount -

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

Quantity17

Rate-

Amount -

S/F call bell/buzzer suitable foe DC/AC single phase 230V complete as reqd.

Quantity3

Rate-

Amount -

S/F bell push modular type complete as reqd.

Quantity3

Rate-

Amount -

S/F 25 amp air-conditioner power plug point i/c 4 modules metal box on surface or in recess 4-modules plate and cover in front, 25 amp modular starter modular socket outlet and 25 amp plug i/c connection etc. as reqd.

Quantity5

Rate-

Amount -

S/F 1.5 ton 5 stars inverter service split air conditioner with stabilizer in built including all accessories for maximum separation of 5mts and connection as reqd. Make Samsung, Model No. AR18TV5PAWK.

Quantity5

Rate-

Amount -

S/F brass batten/angle holder i/c connection etc.as reqd.

Quantity24

Rate-

Amount -

S/F 12W LED bulb

Quantity24

Rate-

Amount -

S/F surface/ pendent mounting 1 x 18 W LED lamp channel luminories complete with all accersories connection etc. as required

Quantity14

Rate-

Amount -

S/F 305mm sweep exhaust fan complete with accessories i/c connection etc. as reqd.

Quantity11

Rate-

Amount -

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

Quantity6

Rate-

Amount -

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Quantity-

Rate-

Amount -

(a)10 amp MCB "C" Curve

Quantity10

Rate-

Amount -

(a)20 amp MCB "C" Curve

Quantity14

Rate-

Amount -

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

Quantity6

Rate-

Amount -

(XIV)SECOND FLOOR

Quantity-

Rate-

Amount -

WOOD WORKS

Quantity-

Rate-

Amount -

Providingandfixingpanelledorpanelledandglazedshuttersfordoors,windowsandclerestorywindowsincludingISImarkedM.Sbutthingesbrightfinishedofrequiredsizewithnecessaryscrews,excludingpanellingwhichwillbepaidforseparately,allcompleteas per direction of Engineer-in-charge.(a) Local best quality Teak wood

Quantity52.36

Rate-

Amount -

Providing and fixing M.S. round or square bars with M.S. flats at required spcing in wooden frames of windows and clerestory windows.

Quantity129.86

Rate-

Amount -

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(a) 300x16 mm

Quantity14

Rate-

Amount -

Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250x10 mm

Quantity84

Rate-

Amount -

(b) 100x10 mm

Quantity84

Rate-

Amount -

Providing and fixing bright finished brass handles with screws etc. complete :(a) 125 mm

Quantity56

Rate-

Amount -

(b) 100 mm

Quantity56

Rate-

Amount -

Providing and fixing bright finished brass hard drawn hooks and eyes (i) 300mm

Quantity56

Rate-

Amount -

FINISHING

Quantity-

Rate-

Amount -

Applying priming coat :- (a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Quantity209.45

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity2621.95

Rate-

Amount -

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Quantity209.45

Rate-

Amount -

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Quantity5.24

Rate-

Amount -

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including priming coat with cement primer:- sqm Rs.

Quantity1248.01

Rate-

Amount -

Finishing walls with textured exterior paint of required shade : (i) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Quantity1373.94

Rate-

Amount -

SH: Providing and installing IEI

Quantity-

Rate-

Amount -

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Quantity-

Rate-

Amount -

Group A

Quantity10

Rate-

Amount -

Group B

Quantity40

Rate-

Amount -

Group C

Quantity10

Rate-

Amount -

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC casing & capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Quantity47

Rate-

Amount -

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.

Quantity-

Rate-

Amount -

(a) 2X2.5mm2+1X2.5mm2 earth wire

Quantity100

Rate-

Amount -

(b) 2X4mm2+1X4mm2 earth wire

Quantity100

Rate-

Amount -

(c) 2X10mm2+1X10mm2 earth wire

Quantity50

Rate-

Amount -

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity27

Rate-

Amount -

15/16 amps switch

Quantity20

Rate-

Amount -

3 pin 5/6 amps socket outlet

Quantity27

Rate-

Amount -

6 pin 15/16 amps socket outlet

Quantity20

Rate-

Amount -

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012 complete with connection as rqd. (Havell's)

Quantity45

Rate-

Amount -

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades without regulator etc.as reqd. (Make Bajaj/Usha or Similar)

Quantity20

Rate-

Amount -

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

Quantity20

Rate-

Amount -

S/F call bell/buzzer suitable foe DC/AC single phase 230V complete as reqd.

Quantity2

Rate-

Amount -

S/F bell push modular type complete as reqd.

Quantity2

Rate-

Amount -

S/F 25 amp air-conditioner power plug point i/c 4 modules metal box on surface or in recess 4-modules plate and cover in front, 25 amp modular starter modular socket outlet and 25 amp plug i/c connection etc. as reqd.

Quantity2

Rate-

Amount -

S/F 1.5 ton 5 stars inverter service split air conditioner with stabilizer in built including all accessories for maximum separation of 5mts and connection as reqd. Make Samsung, Model No. AR18TV5PAWK.

Quantity2

Rate-

Amount -

S/F brass batten/angle holder i/c connection etc.as reqd.

Quantity25

Rate-

Amount -

S/F 12W LED bulb

Quantity25

Rate-

Amount -

S/F surface/ pendent mounting 1 x 18 W LED lamp channel luminories complete with all accersories connection etc. as required

Quantity19

Rate-

Amount -

S/F 305mm sweep exhaust fan complete with accessories i/c connection etc. as reqd.

Quantity10

Rate-

Amount -

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

Quantity5

Rate-

Amount -

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Quantity-

Rate-

Amount -

(a)10 amp MCB "C" Curve

Quantity10

Rate-

Amount -

(a)20 amp MCB "C" Curve

Quantity10

Rate-

Amount -

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

Quantity5

Rate-

Amount -

(XV) Installation concertina/Razor wire on DC office

Quantity-

Rate-

Amount -

Demolishing Cement Concete manually/ by mechanical means and disposal of material withn 50 m lead as per direction of Engineer in charge

Quantity5.9

Rate-

Amount -

providing and laying in position cement concrete of specified grade excluding the cost of centering , shuttering all works upto plinth level - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nsize

Quantity5.9

Rate-

Amount -

75 mm high fencing with angle iron post 50X50X6 mm of 1.24 m long placed at every 2.44 m apart embedded inRCC columns and every 1st, 5th and corner posts to be strutted providing with 6 horizontal line and two diagonals of GI barbed wire (0.164 kg/m) between two posts filled and fixed with GI staples etc complete.

Quantity606.86

Rate-

Amount -

Providing and laying a Concertina/ Razor wire embedded along post fitted and stapples over the existing fence.

Quantity99.6

Rate-

Amount -

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.