Northeast Frontier Railway Tender
View complete overview of Manipur NFR Tender
Costs
EMD
₹ 6,01,700Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Fire Fighting System, Forced Ventilation And Facade Lighting Of Imphal Railway Station Building In Connection With Jiribam-imphal New Line Project
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
EL-CON-SCL-10-2024-25-JI-NFR-CONST HQ-ELECTRICAL/N F RLY CONSTRUCTIONTender No
EL-CON-SCL-10-2024-25-JITender Authority
Northeast Frontier Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying and Fixing Air Vessel made of 450 mm dia 8 mm thick MS sheet 1200 mm in 4 height with air release valve on top and flanged connection to riser drain arrangement with 25 mm dia gunmetal wheel valve with required accessories pressure gauge and painting with synthetic enamel paint of approved shade as required
1
18009
18009
... More
Supply & installation of PIPING, HYDRANT , SPRINKLER AND ACCESSORIES SYSTEM: Providing Laying Testing and Commissioning of following "C" class Heavy duty MS Pipe of wall 5 thickness 6.3mm Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding excavation and Providing cement concrete blocks as supports anticorrosive treatment with coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes complete as required 150mm dia
350
2376
831600
... More
Providing, Laying, Testing and Commissioning of C class Heavy duty MS Pipe 6 Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc and fixing the pipe on the wall / ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required
-
-
5840760
... More
Supplying and Fixing Single Headed Internal Hydrant Valve with instantaneous stainless steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS : 5290 ( Type A ) with blank Stainless Steel cap and chain as required . Single Headed Stainless Steel
10
7494
74940
... More
Supplying and Fixing Single Headed External Yard Hydrant Valve with 1 Nos 63 mm dia instantaneous female Stainless Steel Coupling and cast iron wheel ISI marked Conforming to IS : 5290 ( Type A ) with blank stainless steel cap and chain as required . Single Headed Stainless Steel
20
7494
149880
... More
Supplying, Fixing, Testing and Commissioning of butterfly valve of PN 1.6 Rating with Bronze Gunmetal Sheet duly ISI marked complete with nuts , bolts , washers , gaskets conforming to IS : 13095 of following sizes as required .
-
-
189629
... More
Supplying Fixing Testing and Commissioning of double flanged sluice valve of Rating PN 1.6 with non rising spindle bronze gunmetal seats ISI marked complete with nuts , bolts , washers , gaskets and conforming to IS : 14846 of following sizes complete as required.
-
-
587561
... More
Supplying and Fixing of Orifice plate made out of 6 mm thick stainless steel ( Grade 304 ) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg / sqcm complete as required .
60
1291
77460
... More
Providing Installation Testing and Commissioning of Non Return Valve of following sizes conforming to IS : 5312 complete with rubber gasket , GI Bolts , Nuts , washers etc as required.
-
-
325135
... More
Providing Installation Testing and Commissioning of Stainless Steel Y Strainer of following dia fabricated out of 1.6 mm thick stainless steel , Grade 304 , Sheet with 3 mm dia holes with stainless steel flange
-
-
98570
... More
Supplying and Fixing 63 mm dia 15 m Long RRL Hose pipe with 63 mm dia male and female coupling duly bound with GI wire , rivet etc . Conforming to IS : 636 ( Type A ) as Required . Stainless Steel ( Grade 304 )
15
4434
66510
... More
"Supplying and Fixing First Aid hose reel with MS Construction Spray painted in Post 15 office red conforming to IS : 884 complete with the following as required . 20 mm nominal internal dia water hose thermoplastic ( Textile Reinforced ) Type - 2 as per IS : 12585, 20 mm nominal internal dia gunmetal globe valve and nozzle, Drum and Brackets for fixing the equipments on wall Connections from Riser with 25 mm dia stop gunmetal valve and MS Pipe and socket : 40 Metre Length "
15
10092
151380
... More
Supplying and Fixing 63 mm dia Stainless Steel Short Branch Pipe with 20 mm nominal internal diameter size nozzle conforming to IS : 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. Stainless Steel ( Grade 304 )
15
1648
24720
... More
Supplying and Fixing of Fire brigade connection of Cast iron body with gunmetal male intantaneous inlet coupling complete with cap and chain as required for suitable dia ms pipe connection conforming to IS : 904 as required .
-
-
20412
... More
Supplying and Fixing Air Vessel made of 250 mm dia 8 mm thick MS sheet 1200 mm inheight with air release valve on top and flanged connection to riser drain arrangement with 25 mm dia gunmetal wheel valve with required accessories pressure gauge and painting with synthetic enamel paint of approved shade as required
1
18009
18009
... More
Providing, Fixing, Testing and Commissioning of 15 mm dia Quartzoid bulb type sprinklers of Rating 68 degree centigrade with required accessories.
-
-
726000
... More
Providing and Fixing of Pressure Switch in MS Pipe Line including connection etc as required
10
1508
15080
... More
Providing and Fixing flow switch in following sizes MS Pipe including connection etc as required. 150 mm dia
10
8869
88690
... More
Providing, Fixing, Testingn installation and Commissioning of 150mm dia control valve of cast iron body brass bronze working parts comprising of water motor alarm bronze seat clapper , 22 clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser / sprinkler system activates , pressure gauge , emergency releases , strainer , pressure switch , cock valve complete with drain valve and bypass , test control box , ball vaves , MS pipe of required sizes , flanges , orifice plates , gaskets etc of following sizes as required.
1
47898
47898
... More
Supplying Installation Testing and Commissioning of sprinkler flexible pipe ( UL Listed ) 23 of Stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI Test pressure of 875 PSI ( Burst ) with branch line ( inlet ) 25 mm NPT ( male ) thread to sprinkler head ( outlet ) 15 mm NPT female thread with reducer , nipple , 2 side brackets , center bracket , stockbar of following sizes complete as required.
-
-
1593915
... More
Providing Installation Testing and Commissioning of adjustable rosette plate for 15 mm dia in white finish UL Listed or FM approved complete as required
750
207
155250
... More
Providing, fixing, Testing and Commissioning of Fire Hose Cabinet made up of fully welded construction of wall mounting type, Hose Boxes made out of 16 SWG Stainless Steel. (LxBxH) 25 500mm x 600mm x 600mm size, (3 nos. of Hose Boxes at each Hydrant location) having hinged single front door with locking arrangements and partially glazed with 5 mm thick glass. Cabinet must have Stove enamelled Fire Red finish with "FIRE HOSE" written on front and must be suitable for housing 1 Nos. 30m long synthetic Hose with couplings including 1 No. Branch Pipe complete
40
36455
1458200
... More
Providing & fixing Controlled Percolating (CP) Hose ISI marked (IS:8423) 63 mm dia x 26 15 m long complete with instantaneous type Stainless steel 63 mm dia ISI marked Male & Female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire.brusting pressure not less than 22 Kg/Sqcm. (two nos. for each hydrant-valve) 27
64
5388
344832
... More
Providing and fixing standard firemans axe with heavy rubber handle.
12
870
10440
... More
Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-16 / sq. cm.
20
2486
49720
... More
"Fire Extinguisher Supply, installation, testing & commissioning o f HFC 236fa clean agent extinguisher in 9 kg Cylinder (mountable) with zero ODP."
50
35053
1752650
... More
Providing & fixing of 01 No. 4.5 kg capacity CO Fire Extinguisher with squeeze grip operation, discharge hose & hom. Extinguisher should be ISI marked and confirming to current and valid BIS certification IS 15683:2018 a. warranty as per manufacturer. b.Discharge valve shall be 30 conform to all the requirement given in IS 3224:2002 or latest version thereof. c.Arrangement/hook for installation in Cabinet. d. Used Unused/Ready Indicator to identify the used e. extinguishers from the unused extinguishers. The extinguisher shall have suitable controllable discharge mechanism to provide flexibility of releasing extinguishing agent on targeted fire location. The valve housing should be covered with a cap made of ABS plastic to protect it from dust & moisture etc.
50
24298
1214900
... More
"Providing & fixing of 01 no. 6 kg Dry Chemical Powder (Stored Pressure Type) Mono Ammonium phosphate powder conforming to IS: 14609 with suitable Controllable discharge 31 mechanism. Stored pressure type and with pressure gauge, discharge hose & nozzle. Epoxy polyesterpowder coated as per IS: 15683:2018 and ISI mark portable fire extinguisher and MICROSWITCHES / REED SWITCHES for indication of removal of fire extinguisher from extinguisher cabinet & warranty as per manufacturer along with suppply and erection of fixing stand as per site requirement /instuction of Engnieer-in-charge 01 no. 6 kg Dry Chemical Powder (Stored Pressure Type) Mono Ammonium phosphate powder conforming to IS: 14609 with suitable Controllable discharge mechanism. Stored pressure type and with pressure gauge, discharge hose & nozzle. Epoxy polyester powder coated as per IS: 15683:2018 and ISI mark portable fire extinguisher and MICROSWITCHES / REED SWITCHES for indication of removal of fire extinguisher from extinguisher cabinet & warranty as per manufacturer along with suppply and erection of fixing stand as per site requirement /instuction of Engnieer-in- charge "
40
18302
732080
... More
Electrical Panel : Fabrication, supplying, installation, testing & commissioning of electrical control panel of cubical construction, floor mounted type fabricated out of 2mm Thick CRCA sheet, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering, etc., complete in all respects suitable for operation on 415 V, 3 phase, 50 Hz. AC supply with enclosure protection class IP 42 as required. Including supply installation , termination testing & Commissioning of power and control cables as per specification comprising of the following : " "Common Panel In Fire Pump House " 32 "Incomer " "400 Amps. TP & N SFU with HRC fuses. - 1 set " "Voltmetre (0-500 Volts) with selector switch. " "Ammetre (0-500 Amps.) with selector switch & CT's etc. - 1 set " "Set of 3 Phase LED indicating lamp. " "Set of electrolytic grade 4 pole Aluminium bus bar 630 Amps. - 1 set " "MCC-cum- ICP inclusive of Alarm annunciators, pushbuttons, selector switches etc. - 1 set " "Outgoing. " "Main fire pump.- 1 each " "200 Amps TP & N MCCB, Ics=100%Icu with fully automatic star/delta starter suitable for 75 HP pump with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. " "Jockey Pump. - 2 each " "100 Amps.MCCB, 50KA, Ics=100%Icu & N SFU with suitable HP fully automatic DOL starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
1
287855
287855
... More
"Diesel Engine Control " "Control for Diesel engine comprising :- " "Auto/Manual selector switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode. " "Indication lamp for High/Low Lub.oil pressure, High Water Temperature. And Engine 33 ON indication. " "Battery charger suitable for 12 V/24V DC with boost and tickle selector switch, 0-15 V/0-30 V DC volt metre, 0-20A DC Ammetre. " "All standard relays and accessories for automatic operation of diesel engine. " Designing, supply, installation, testing & commissioning of system controller to control operation of main electric fire pump, diesel pump, pressurization pump, terrace pumpin sequence as per specification consisting ofn relays, timers, sensors, annuciation window for fault indication, complete as per specifications.
1
245730
245730
... More
Supply & laying of 1.1 KV Grade FRLS, PVC outer sheath, steel armoured, aluminium / 34 copper conductor of following size to be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth. The rate shall excludes tray & Hume pipes. The minimum size of the cables shall as mentioned below, 35
-
-
86975
... More
Supply, connection & fixing of aluminium cable lug of following size :
-
-
1056
... More
Excavation of trench 0.75 mtr below GL for laying of cable, HDPE pipe and refilling of the same after laying.
1000
22
22000
... More
CABLE TRAY: Supplying and fixing of perforated G.I.sheet cable tray with necessary angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall not exceed 450 mm. Size of the tray shall be suitable for laying the above mentioned cables.
50
303
15150
... More
Supply, Installation of Flow metre (Electronic type) on Test line to measure 150 % of pump flow and suitable to 200 mm dia.
3
8645
25935
... More
Supply and installation of Pressure switches of suitable range for pump sets with Ball valves, Fittings like unions / colors / reducers etc.
3
275
825
... More
Supply and installation of Pressure gauges of suitable range for pumpsets with Ball valves, siphon, Fittings like unions / collors / reducers etc.
-
-
40
... More
Supply & fixing of Exhaust pipe by 150mm dia medium gauge MS pipe for Diesel engine coated with mineral wool insulation with aluminum sheet.
30
3030
90900
... More
Drilling with core cutting machine in RCC beams, slabs, floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete.
7
1354
9478
... More
Supply and installaton of Addressable (Chip-based) Linear Heat Detection System (LHDS) along with all accessories required items using electronic temperature sensors and resettable line type heat detectors with VdS approval as per EN 54-22 communicable with Modbus RTU or TCP
3000
3842
11526000
... More
Design, supply, installation, testing and commissioning integrated fire monitoring and 44 prevention system by using Addressable (Chip-based) Linear Heat Detection System (LHDS) using electronic temperature sensors and resettable line type heat detectors with VdS approval as per EN 54-23 using SCADA System. The system is to be intgrated with fire hydrant system also.
1
1280700
1280700
... More
Supply and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners.
-
-
172930
... More
Supply, Installation, testing and commissioning of Tube Axial flow fans with adjustable pitch blade, MS/GI long casing, cast aluminium alloy hub and blade complete with TEFC Sq. Cage 46 Induction motor suitable for 415volts ±10%,50HZ ±3%, Three phase A.C supply with support , Mountings arrangement, vibrations isolators, double layer fire retardant flexible cavas connection, bird screeen with cowl etc. of following capacity. The fan motor shall be suitable for 250C temperature rated for 2hours in case of Class H. Fan out let velocity shall be limited to maximum of 12m/sec. Axial Fan shall be AMCA certified for Air & Sound performance in accordance to AMCA 210 and AMCA 300.
-
-
4257012
... More
Supply, installtion,Testing and commissioning of Propeller fan wiith motor complete in all respect & of following capacities. The casing of propeller fans Shall be PVC / METALIC and should be lower noise level. The fan shall be suitable for 230V, 1Ph., 50Hz AC power supply, 10000 cfm
2
1138504
2277008
... More
Design, supply, fabrication and erection Class - VIII grade (120 GSM)supply air duct along with necessary supports, flanges etc. as required and as per IS 655 and IS-277 standards of following gauges. 49
-
-
5337700
... More
Supply & fixing of extruded Aluminium Square Diffusers/ Grille with VCD for Supply Air. 50
19
48263
916997
... More
Supply and fixing of Opposed blade GI Duct Damper
14
23760
332640
... More
Supply & installation of Recess mounted maximum 33 W 600mmX600mm high efficient LED Dimmable and white colour Tunable luminaire with white powder coated rough aluminium extruded housing with polycarbonate diffuser for Uniform illumination and wider light 51 distribution. Minimum 93 Lumens/Watt system efficacy, 33 W providing minimum 3065 Im systemoutput. LED chip life of 50,000 burning hours at L70. IP 20, CCT 2700K-6500K, CRI> 80. Luminaire driver should be Isolated and multistage constant current constant voltage APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V (nominal rated voltage-240V) with minimum 2.5 KV surge protection, PF>0.95, THD <10%. Similar to Wipro Model No. LM29-451-XXX-57- XX(Dimmable & Tunnable)
357
19765
7056105
... More
Supply & installation of 12W LED Surface mounted fixture with System efficacy of more than 100lm/W and system lumen output minimum 1200lm. Luminaire shall have white powder coated diecast aluminium housing with satin finished transluscence (HET) diffuser for uniform illumination and wider light distribution. The LED shall be compliant with LM80-08 standard with L70 52 life of 50000 Hrs tested at maximum current. The LEDs used should be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be Multistage, Isolated type, APFC, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 100V to 265V (nominal rated voltage-240V) with 2.5 KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Complying to SELV <60V DC standards. Similar to Wipro Model No. LD06-151-XXX-65SMG1
12
3003
36036
... More
Supply & installation of 12W dimmable and white colour tunable LED Recess mounted fixture win system efficacy of more than 100lm/W and system lumen output minimum 1200lm. Luminaire shall have IP40 protected white powder coated diecast aluminium housing with satin finished transluscence (HET) diffuser for uniform illumination and wider light distribution. The LED 53 shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current. The LEDs used should be with CCT of 2700 K-6500 K and CRI of Minimum 80. LED Driver shall be Multistage, Isolated type, APFC, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 100V to 265V (nominal rated voltage - 240V) with 2.5 KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Complying to SELV <60V DC standards. Similar to Wipro Model No. LD06-151DALI-57-XX (Dimmable)
782
7705
6025310
... More
Supply & installation of 12W LED Recess mounted fixture with System efficacy of more than 100lm/W and system lumen output minimum 1200lm. Luminaire shall have IP40 protected white powder coated diecast aluminium housing with satin finished transluscence (HET) diffuser for uniform Illumination and wider light distribution. The LED shall be compliant with LM80-08 standard with L70 54 life of 50000 Hrs tested at maximum current. The LEDs used should be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be Multistage, Isolated type, APFC, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 100V to 265V (nominal rated voltage-240V) with 2.5 KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Complying to SELV <60V DC standards. Similar to Wipro Model No. LD06-151-XXX-57-XX
236
1829
431644
... More
Supply & installation of pendent mounted integral Round LED Downlight with superior optics clubbed with variety of beam angles (36 and 60 degree) to create the right play of light and having 54 mm Dia, length 150mm with power consumption Maximum upto 10 W having system lumen 55 output of Minimum 800 Lumen. LED chip life of 50,000 burning hours at L70-Minimum tested for 10K hours for complaince of TM21 projection. The LED used shall have CCT of 5700K, CRI>80 Ra. The LEDs used in the product shall be of reputed make like Nichia/ Cree/ Bridgelux/ Lumiled. Luminaire driver should be Isolated and multistage constant current APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V (nominal rated voltage-240V) with minimum 2 KV surge protection, PF>0.95, THD <10%; IP 20; Similar to Wipro Model No. LD30-101-36B-57-PS
13
3735
48555
... More
Supply & installation of pendent mounted integral Round LED Downlight with superior optics clubbed with variety of beam angles (36 and 60 degree) to create the right play of light with power consumption Maximum upto 20 W having system lumen output of Minimum 1600 Lumen. LED 56 chip life of 50,000 burning hours at L70-Minimum tested for 10K hours for complaince of TM21 projection. The LED used shall have CCT of 5700K, CRI>80 Ra. The LEDs used in the product shall be of reputed make like Nichia/ Cree/ Bridgelux/ Lumiled. Luminaire driver should be Isolated and multistage constant current APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V (nominal rated voltage-240V) with minimum 2 KV surge protection, PF>0.95, THD <10%; IP 20. Similar to Wipro Model No. LD30-201-36B-57-PS
6
4331
25986
... More
Supply & installation of Suspended Round LED Ring Type Downlight with pressure die cast Aluminium housing and high transmitive PMMA diffuser having 600mm Dia, with power consumption Maximum upto 35 W having system lumen output of Minimum 3500 Lumen. LED chip 57 life of xw 50,000 burning hours at L70 - Minimum tested for 10K hours for complaince of TM21 projection. Luminaire driver should be Isolated and multistage constant current APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V (nominal rated voltage-240V) with minimum 2 KV surge protection, PF>0.95, THD <15%; IP 20;. Similar to Wipro Model No. LM23OR-621- XX57-XW
18
13263
238734
... More
Supply & installation of i-Sense wireless loT System having BLE 5.2 AES 128 Bit encyption based 4 child DALI controller, operates on 90-277 VAC, 65mA, 50Hz, following DALI 2.0 58 protocol. It must have auxillary power output of 12V DC & 100mA to power sensor devices & 8mA current connected to 4 DALI drivers, 0-100% dimming, device to device range 45m. Controller must individually control standard DALI or Tunable DALI Drivers independantly or combination of both. Operating temperature -20 to 50 deg celsius, surge protection 4kV. System shall support easy commissioning and configuration via Mobile Application along with user and site management features. Optional Cloud Application must be available for control and monitoring of the devices along with analytics reports. Mobile Application shall have features of individual & group control for On/off/dimming/colour tuneing/SceneControl/Animation etc. Device must have security key for commissioning and replacement for future. Similar to Wipro Model No. WCADIN
41
9582
392862
... More
Supply & installation of i-Sense wireless IoT System having BLE 5.2 AES 128 Bit encyption based 32 child DALI controller and analog 2 channel (0-10V) output, operates on 100-277 VAC, 10-30mA, 50Hz. DALI 2.0 protocol. Sensor input of 0-3V DC & 1mA. For analog dimming, It provides output voltage of 0-10V DC +/-0.2V and 15mA per channel. For DALI output, it provides 12- 20V DC and 160mA max for 32 DALI devices. An auxillary power output of 3.3VDC and 30mA, 0-100% 59 dimming, device to device range 45m. Controller must control individually control standard DALI or Tunable DALI Drivers independantly or combination of both. Operating temperature -20 to 50 deg celsius, surge protection 3kV. System shall support easy commissioning and configuration via Mobile Application along with user and site management features. Optional Cloud Application must be available for control and monitoring of the devices along with analytics reports. Mobile Application shall have features of individual & group control for on/off/dimming/colour tuneing / Scene Control/Animation etc. Device must have security key for commissioning and replacement for future. Similar to Wipro Model No. WCA2CSD32N
46
28403
1306538
... More
Supply & installation of i-Sense BLE 5.2 AES 128 Bit encyption based wireless battery powered 5-button wall switch that controls ON/OFF, intensity and CCT of an individual or group of 60 luminaires. Operates on 3V DC input voltage in an ambient temperature of 0 to 50 deg celsius and device to device range 45m. System shall support easy commissioning and configuration via Mobile Application along with user and site management features. Optional Cloud Application must be available for control and monitoring of the devices along with analytics reports. Similar to Wipro Model No. WSC5B
69
5109
352521
... More
Supply & installation of i-Sense WiFi and BLE 5.2 AES 128 Bit encyption Gateway with Ethernet and built-in Real Time Clock for cloud connectivity and scheduling. It is powered by 5V, 2A Mini USB / DC Adaptor and has 1 ethernet port with 10/100 Mbps data transmission rate. RTC is 61 battery powered with 3V DC. Device to device range 30m X 30m, operating ambient temperature of - 20 to 55 deg celsius. System shall support easy commissioning and configuration via Mobile Application along with user and site management features. Optional Cloud Application must be available for control and monitoring of the devices along with analytics reports. Device must have security key for commissioning and replacement for future. Similar to Wipro Model No. WBTWNER
51
30267
1543617
... More
Supply & installation of recess mounting type 12W LED downlight fitting having lumen afficacy more than 100W with electronic driver and all accessories similar to Wipro Model No. LD81- 101-XXX@45<45@XX
310
643
199330
... More
Supply & erection of 60W ring type 1200mm Dia recessed LED Profile light with all required accessories and driver similar to Wipro Model No.LM34C-Axeon Cuve
50
28025
1401250
... More
Supply & erection of 600mm linear, recess mounting type 10W LED Profile light with all required accessories similar to Wipro Model No. LM04-151-XXX-57RWC
125
6986
873250
... More
Supply & erection of 1200mm linear, recess mounting type 20W LED Profile light with all required accessories similar to Wipro Model No. LD81-301-XXX-57RWC
500
12107
6053500
... More
Supply & erection of 15W LED cylindrical hanging light with all required accessories similar to Wipro Model No. LD99-211-XXX57PMWH
30
2791
83730
... More
Supply & erection of 20W LED Suspended Pendent light similar to Wipro Model No. LD30-201-60W-57-SS 68
30
6042
181260
... More
Supply & erection of 10W LED Bracket light similar to Wipro Model No. WL-WALLY-B22
70
974
68180
... More
Supply & erection of 72W RGBW Round LED Mini Floodlight with System Lumen Output of Minimum 3960 Lumen (±10%) with all channel ON. Fixture shall be made up of Die Cast Aluminum Housing duly powder coated with grey pure polyester for better heat decapitation having IP66 Dust 69 and Water Protection for Outdoor usage with impact protection of IK08. Fixture dimension shall be of148mm Dia and 149mm height. The Luminaire should have multiple beam options of 06°/11°/15°/30°/60° to be used as per design intent/requirement. The luminaire shall have option of installing directly on Wall/ground with the help of screws. The luminaire should have loop in loop out provision for power and DMX Signal. Luminaire shall have 4 DMX channel with Integrated DMX decoder. Luminaire should be capable of operating at 24VDC, with External IP66 24Vdc Driver. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same similar to Wipro Model No. LF04-841-11-CCW-G2
28
49000
1372000
... More
Supply & erection of 24W RGBW Round LED Mini Floodlight with System Lumen Output of Minimum 1320 Lumen (±10%) with all channel ON. Fixture shall be made up of Die Cast Aluminum Housing duly powder coated with grey pure polyester for better heat decapitation having IP66 Dust and Water Protection for Outdoor usage with impact protection of IKOB, Fixture dimension shall be of 70 148mm Dia and 149mm height. The Luminaire should have multiple beam options of 06"/11°/15°/30°/60° to be used as per design intent/requirement. The luminaire shall have option of installing directly on Wall/ground with the help of screws. The luminaire should have loop in loop out provision for power and DMX Signal. Luminaire shall have 4 DMX channel with Integrated DMX decoder. Luminaire should be capable of operating at 24VDC, with External IP66 24Vdc Driver. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same similar to Wipro Model No. LF04-241-11-CCW-G2
72
19057
1372104
... More
Supply & erection of 96W RGBW Linear LED Wall washer with System Lumen Output of Minimum 3840 Lumen (±10%) with all channel ON. Minimum Length of fixture should be 1000mm (+/- 5mm). Fixture shall be made up of Extruded Aluminum Housing for better heat decapitation having IP66 Dust and Water Protection for Outdoor usage with impact protection of IK07. Fixtures shall be available with Baffle as option for Glare protection to be mounted separately. The Luminaire should 71 have multiple beam options of 11°/15°/30°/60°/ASM to be used as per design intent/requirement. The luminaire shall have horizontal flexibility for mounting with slideable brackets. The luminaire should have loop in loop out provision for power and DMX Signal. LED Life should be of minimum 35000 burning hours @L70. Luminaire shall have 4 DMX channel with Integrated DMX decoder. Luminaire should be capable of operating at 24VDC, with External IP66 24Vdc Driver. Luminaire and Driver should be Made in India. Luminare, Driver and controller similar to Wipro Model No. LF01-122-30- CCWG2
18
56788
1022184
... More
Supply & erection of 36W RGBW Linear LED Wall washer with System Lumen Output of Minimum 1440 Lumen (±10%) with all channel ON. Minimum Length of fixture should be 1000mm (+/- 5mm). Fixture shall be made up of Extruded Aluminum Housing for better heat decapitation having IP66 Dust and Water Protection for Outdoor usage with impact protection of IK07. Fixtures shall be available with Baffle as option for Glare protection to be mounted separately. The Luminaire should 72 have multiple beam options of 11°/15°/30°/60°/ASM to be used as per design intent/requirement. The luminaire shall have horizontal flexibility for mounting with slideable brackets. The luminaire should have loop in loop out provision for power and DMX Signal. LED Life should be of minimum 35000 burning hours @ L70. Luminaire shall have 4 DMX channel with Integrated DMX decoder. Luminaire should be capable of operating at 24VDC, with External IP66 24Vdc Driver. Luminaire and Driver should be Made in India. Luminare, Driver and controller similar to Wipro Model No. LF01-361-30- CCWG2
24
265500
6372000
... More
Supply & erection of 72W RGBW Round LED Mini Floodlight with System Lumen Output of Minimum 3960 Lumen (±10%) with all channel ON. Fixture shall be made up of Die Cast Aluminum Housing duly powder coated with grey pure polyester for better heat decapitation having IP66 Dust and Water Protection for Outdoor usage with impact protection of IK08. Fixture dimension shall be of 73 148mm Dia and 149mm height. The Luminaire should have multiple beam options of 06"/11"/15°/30°/60° to be used as per design intent/requirement. The luminaire shall have option of installing directly on Wall/ground with the help of screws. The luminaire should have loop in loop out provision for power and DMX Signal. Luminaire shall have 4 DMX channel with Integrated DMX decoder. Luminaire should be capable of operating at 24VDC, with External IP66 24Vdc Driver. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make similar to Wipro Model No. LF04-841-11-CCW-G2
22
49000
1078000
... More
Supply & erection of 12W RGBW Linear LED Wall washer with System Lumen Output of 74 Minimum 480 Lumen (±10%) with all channel ON. Minimum Length of fixture should be 1000mm (+/- 5mm). Fixture shall be made up of Extruded Aluminum Housing for better heat decapitation having IP66 Dust and Water Protection for Outdoor usage with impact protection of IK07. Fixtures shall be available with Baffle as option for Glare protection to be mounted separately. The Luminaire should have multiple beam options of 11°/15°/30°/60°/ASM to be used as per design intent/requirement. The luminaire shall have horizontal flexibility for mounting with slideable brackets. The luminaire should have loop in loop out provision for power and DMX Signal. LED Life should be of minimum 35000 burning hours @L70. Luminaire shall have 4 DMX channel with Integrated DMX decoder. Luminaire should be capable of operating at 24VDC, with External IP66 24Vdc Driver. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make similar to Wipro Model No. LF01151-15-CCWG2
16
17287
276592
... More
"Supply & erection of RGB LED waterproof strip light IP67, IK06, sealed with anti-UV polyurethane without color shifting and anti UV aging;, system wattage 18 Watt/Mtr with minimum system lumens of 450 lm/mtr, operated at DC 24VDC, Class III for safety use. Beam angles should be >110"", efficacy should be 232 lm/w, SDCMS5, Lifeclass should be at least 30,000 burning hours at 75 L70850@ 35°C. Operating temperature should be in the range of -40° to +50°C. The product should be CB and CE certified and follow EN60598, EN62471, EN62493+IEC62778, CE EMC standards and also compliant to ROHS and REACH. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval. similar to Wipro Model No. LS27-18-TB16-CWPG1"
50
34202
1710100
... More
Supply & erection of 36W Mono Linear LED Wall washer with System Lumen Output of Minimum 1440 Lumen (±10%) with all channel ON. Minimum Length of fixture should be 1000mm (+/- 5mm). Fixture shall be made up of Extruded Aluminum Housing for better heat decapitation having IP66 Dust and Water Protection for Outdoor usage with impact protection of IK07. Fixtures shall be available with Baffle as option for Glare protection to be mounted separately. The Luminaire should 76 have multiple beam options of 11"/15°/30°/60°/ASM to be used as per design intent/requirement. The luminaire shall have horizontal flexibility for mounting with slideable brackets. The luminaire should have loop in loop out provision for power and DMX Signal. LED Life should be of minimum 35000 burning hours @L70. Luminaire shall have 4 DMX channel with Integrated DMX decoder. Luminaire should be capable of operating at 24VDC, with External IP66 24Vdc Driver. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make similar to Wipro Model No. LF01-361-30-30-G2
16
22863
365808
... More
Supply & erection of 36W Mono Round LED Mini Floodlight with System Lumen Output of Minimum 1980 Lumen (±10%) with all channel ON. Fixture shall be made up of Die Cast Aluminum Housing duly powder coated with grey pure polyester for better heat decapitation having IP66 Dust and Water Protection for Outdoor usage with impact protection of IK08. Fixture dimension shall be of 77 148mm Dia and 149mm height. The Luminaire should have multiple beam options of 06°/11°/15°/30°/60° to be used as per design intent/requirement. The luminaire shall have option of installing directly on Wall / ground with the help of screws. The luminaire should have loop in loop out provision for power and DMX Signal. Luminaire shall have 4 DMX channel with Integrated DMX decoder. Luminaire should be capable of operating at 24VDC, with External IP66 24Vdc Driver. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make similar to Wipro Model No. LF01-241-11-CCW-G2
14
20208
282912
... More
Supply & erection of 24W RGBW Linear LED Wall washer with System Lumen Output of Minimum 960 Lumen (±10%) with all channel ON. Minimum Length of fixture should be 1000mm (+/- 5mm). Fixture shall be made up of Extruded Aluminum Housing for better heat decapitation having IP66 Dust and Water Protection for Outdoor usage with impact protection of IK07. Fixtures shall be available with Baffle as option for Glare protection to be mounted separately. The Luminaire should 78 have multiple beam options of 11"/15"/30@47<47@ASM to be used as per design intent/requirement. The luminaire shall have horizontal flexibility for mounting with slideable brackets. The luminaire should have loop in loop out provision for power and DMX Signal. LED Life should be of minimum 35000 burning hours @L70. Luminaire shall have 4 DMX channel with Integrated DMX decoder. Luminaire should be capable of operating at 24VDC, with External IP66 24Vdc Driver. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make similar to Wipro Model No. LF01-241-30-CCWG2
22
16225
356950
... More
Supply & erection of 48W RGBW Linear LED Wall washer with System Lumen Output of 79 Minimum 1920 Lumen (±10%) with all channel ON. Minimum Length of fixture should be 1000mm (+/- 5mm). Fixture shall be made up of Extruded Aluminum Housing for better heat decapitation having IP66 Dust and Water Protection for Outdoor usage with impact protection of IK07. Fixtures shall be available with Baffle as option for Glare protection to be mounted separately. The Luminaire should have multiple beam options of 11°/15°/30°/60°/ASM to be used as per design intent/requirement. The luminaire shall have horizontal flexibility for mounting with slideable brackets. The luminaire should have loop in loop out provision for power and DMX Signal. LED Life should be of minimum 35000 burning hours @ 170. Luminaire shall have 4 DMX channel with Integrated DMX decoder. Luminaire should be capable of operating at 24VDC, with External IP66 24Vdc Driver. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make similar to Wipro Model No. LF01-481-30-CCWG2
8
35695
285560
... More
Supply & erection of 36W RGBW Linear LED Wall washer with System Lumen Output of Minimum 1440 Lumen (±10%) with all channel ON. Minimum Length of fixture should be 1000mm (+/- 5mm). Fixture shall be made up of Extruded Aluminum Housing for better heat decapitation having IP66 Dust and Water Protection for Outdoor usage with impact protection of IK07. Fixtures shall be available with Baffle as option for Glare protection to be mounted separately. The Luminaire should 80 have multiple beam options of 11°/15°/30°/60°/ASM to be used as per design intent/requirement. The luminaire shall have horizontal flexibility for mounting with slideable brackets. The luminaire should have loop in loop out provision for power and DMX Signal. LED Life should be of minimum 35000 burning hours @ 170. Luminaire shall have 4 DMX channel with integrated DMX decoder. Luminaire should be capable of operating at 24VDC, with External IP66 24Vdc Driver. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make similar to Wipro Model No. LF01-361-30-CCWG2
22
26550
584100
... More
Supply & erection of 36W RGBW Linear LED Wall washer with System Lumen Output of Minimum 1440 Lumen (±10%) with all channel ON. Minimum Length of fixture should be 1000mm (+/- 5mm). Fixture shall be made up of Extruded Aluminum Housing for better heat decapitation having IP66 Dust and Water Protection for Outdoor usage with impact protection of IK07. Fixtures shall be available with Baffle as option for Glare protection to be mounted separately. The Luminaire should 81 have multiple beam options of 11"/15"/30/60"/ASM to be used as per design intent/requirement. The luminaire shall have horizontal flexibility for mounting with slideable brackets. The luminaire should have loop in loop out provision for power and DMX Signal. LED Life should be of minimum 35000 burning hours @L70. Luminaire shall have 4 DMX channel with Integrated DMX decoder. Luminaire should be capable of operating at 24VDC, with External IP66 24Vdc Driver. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same makesimilar to Wipro Model No. LF01-361-30-CCWG2
12
26550
318600
... More
Supply & erection of WL-DIN 1024 Lighting playback controller which provides a reliable, fully integrated control solution. WL-DIN 1024 shall be able to programmed and configured using the software on site. WL-DIN 1024 shall have inbuilt triggering and show control via Ethernet, RS232, Contacts, Clock, NODE x4 ports, Master/slave inputs to program colour schemes and programs required by customer. WL-DIN 1024 should also supports RDM discovery and addressing for easy installation at site. WL-DIN 1024 shall have pixel accurate timeline programming and pixel- mapped media support for programming. WL-DIN 1024 should have Algorithmic, realtime playback 82 engine ideally suited to interactive control and time based control of program. WL-DIN 1024 shall have integrated realtime and astronomical clock functionality with daylight saving support. WL-DIN 1024 shall use multiple units connected and synchronized over Ethernet to scale to larger presentations. WL-DIN 1024 can be integrated with other Controllers in Master/Slave topology. WL- DIN 1024 shall have Multiple Zone 10 Zone, play 10 scene/sequence per time, WL-DIN 1024 in Stand Alone mode the Internal Memory 8Mb Internal memory can be expandable via Micro SD Card upto 256 GB, Mounting in electrical DIN cabinets with DIN rails. Default start scene, Scene priority, Cross Fade time between scenes Automatic Scene Recovery if the power is cut off. channel management Real Time Clock and calendar for each scene (Hour, Day, Week, Month, Year)similar to Wipro Model No. WL-DIN 1024
4
199125
796500
... More
Supply & erection of WL-SPL 26 Splitter is a 6-output DMX splitter with DMX signal boosting. This unit takes the incoming DMX signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6X32. Housing- 83 MS/Aluminum. The output terminals are optically isolated from the input and share a common ground reference. All six output ports have an independent output driver and ELV transformer to boost the DMX signal. 1: 6 Way DMX Splitter/Booster, Optically isolated DMX Input/Outputs Individual coil transformer for each output, Surface/Rack/Floor/Celling mountable with provide mounting accessories Refined and filtered data Cable 3 core 0.75sq.mm cablesimilar to Wipro Model No. WL-SPL-26
12
91450
1097400
... More
Supply & erection of WL-Button 6 Flush-mounting wall panel 6 dry Button panel with a16 port connection. Button system should have trigger to control light with responsive, reactive programming
4
21004
84016
... More
Supply, laying & connection of tightly twisted conductors Digital Multiplex cable (DMX) having characteristic impedance of 100-120 ohms, preferably 120 ohms
2000
159
318000
... More
Supply & laying of 1.1 KV Grade PVC insulated FRLS single core 4mm2 multistrand 86 flexible copper conductor conforming to IS 694-1990 through PVC conduit pipe with earth continuity by PVC insulated FRLS single core 4mm2 copper conductor for main line for LED signage and indoor and outdoor lighting
2000
74
148000
... More
Supply & laying of 1.1 KV Grade PVC insulated FRLS single core 1.5mm2 multistrand 87 flexible copper conductor conforming to IS 694-1990 through PVC conduit pipe with earth continuity by PVC insulated FRLS single core 4mm2 copper conductor for main line for LED signage and indoor and outdoor lighting
43000
32
1376000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements