Yashwantrao Chavan Maharashtra Open University Tender

Table With Side Table (2600 x 2300):-Supplying & Placing Modular table in completely knock down conditions with an overall size 2600mm X 2300mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall have the size 2600mm X 1100mm/950mm X 750mm made up of 75mm thick Medium density fibre-board of general purpose of IS 12406 with Red veneer polished as per approved decorative colour. The table top profile shall have round structure with taper edges. The table top shall be supported on MDF base gable end. The end wall of the table on the side shall be topped by gable end. The 75mm thick Gable end shall be provided at both side with an overall size 820mm X 670mm of MDF with veneer polished. The gable end shall be inclined as per table top constructed and edges shall have taper structure. The gable end base shall be made up of MDF with black polished having the size 840mm X 95mm with 10mm thick. The table shall be clad with 12mm thick modesty panel. The modesty panel shall be made up of Medium Density Fibre-board with an overall size 2290mm X 670mm. Modesty panel shall have round profile according to table top structure and shall be polished with leather, It shall have an outer modesty panel for aesthetically design made up of MDF polished with red veneer having the size 1600mm X 370mm with 12mm thick. The edges shall be taper as per approved design. A leather base 6mm thick writing pad shall be provided with an overall size 1100mm/900mm X 400mm. The side storage unit shall be provided with the top size of 1200mm X 600mm X 750mm made up of MDF board with veneer. Storage top and skirting shall be 25mm thick, shutter, facia, adjustment shelf and divider shall be 18mm thick and bottom shall be 9mm thick made up of MDF board of IS 12406. Storage have 4 nos. drawers having size 735mm X 190mm & 735mm X 105mm shall be operated with the assistance of 400mm soft-close telescopic channel runs on ball bearing telescopic channel having load capacity 35kg, 1 nos. shelf having size 395mm X 530mm shall be adjustable type. All drawers shall have simultaneous locking property with the assistance of central locking mechanism and having leather base handle. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom with size 1160mm X 50mm and 520mm X 50mm with 25mm thick and black polished. Pedestal shall be provided with an overall size 600mm X 600mm X 650mm. The drawer top and side shall be 25mm thick, bottom, back and side panels including the drawer facia is made up of 18mm thick and drawer base shall be 9mm thick made up of MDF board of IS 12406. The top edges shall be taper structure. The drawer boxes shall be operated by 400mm bottom channel sliding roller to smooth operation having load carrying capacity 20 Kg. The drawer shall have centralize locking mechanism and leather base handle. OEM must have BIFMA test certificate, AIOTA Certificate, Valid menmbership of CII, Green Guard certificate for same category.

Table With Side Table (2400 x 1700):-Supplying & Placing Modular table in completely knock down conditions that is to be assembled at site. The worktop shall have 60mm thick made up of Medium Density Fibre-board with approved veneer Polish and at centre with Leather covering. The table top profile shall have round structure with waterfall edges. The table top shall be supported on MDF board based Capsule Shape Box One Side in PU Finish & duly deco painted. The end wall of the table on the other side shall be topped by 1D+1S Pedestal 350LX600DX700HT in 18mm thick MDF Board Based & Complete body, Fascia, Shutter, Internal Box & in moulded construction with full round post forming edges and duly deco painted. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick medium density fibre-board in PU FInish. There shall be buffers provided at the base to avoid scratches on the floor. The table shall have side unit for storage purpose e with Curved shaped door . The drawer shall be operated with finger groove Handle and easily close & open with the assistance of sliding channels to enable smooth operation and sliding rail track and concealed crank hinge. Storage External Body, Drawer fascia & Shutter in MDF Veneer Finish, sides shall be made up of MDF base board with Veneer Polish and Top, Bottom, Skirting, & Internal Partition, Drawer Box in 18mm MDF Based in PU Paint FInish. Storage to have Lock & Wireless Charger. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. The complete structure shall be supplied with approved veneer laminate, PU polish and deco painted. OEM must have BIFMA test certificate, AIOTA Certificate, Valid menmbership of CII, Green Guard certificate for same category.

Table With Side Table (2100 x 1800):-Supplying & Placing Modular table in completely knock down conditions with an overall size 2100mm X 1800mm X 750mm that is to be assembled at site. The top shall have the size 1900mm X 900mm made up of 45mm thick mdf venner . The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table top shall be supported on 75mm Peg mounted over side storage unit and fixed pedestal. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 45mm thick profile shall be in linear shape . The table shall be clad with 18mm thick modesty panel which provide structural support for the table. The table shall have side unit for storage purpose with an overall size 1800mm X 510mm X 625mm. The side unit shall be made up top and side 45mm thick and drawer base 9mm thick & other parts 18mm thick like shutter, back, facia, etc. It shall have 3 drawer and 2 sliding shutter. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A hanging pedestal shall be provided with an overall size 455mm X 685mm X 485mm. The pedestal shall be made up of Pedestal side, back, facia shall be 18mm thick & drawer base shall be 9mm thick. The pedestal shall have 2 nos. of drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of sliding channels to enable operation. The drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. OEM must have BIFMA test certificate, AIOTA Certificate, Valid menmbership of CII, Green Guard certificate for same category.