Workshop Projects Organisation Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Workshop Projects Organisation - WPO Tender
Miscellaneous Works
Railway
Electrical and Electronics
Electrical Works
Ireps
Opening Date1 Feb 2022
Closing Date22 Feb 2022
Tender Amount₹ 58,77,12,293
Costs
EMD
₹ 30,88,600Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
WP-Mech-PRTN-WT-25OpenTender No
WP-Mech-PRTN-WT-25OpenTender Authority
Workshop Projects Organisation ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing & fixing of composite insulated panels manufactured in a continuous process plant with high speed oscillation sprayed foam in roof and wall with all necessary flashing, trims, ridge capping, accessories & fasteners to ensure and air tight, insulated building which is not only functionally compliant but also aesthetically pleasing with contemporary international look. The specification is as follows:- Composite insulated panels having on top side trapezoidal profile 28-35 mm deep and 200- 300mm pitch with 950-1050 mm effective cover width. The profile having 2-3 secondary ribs in pan and an anticlimactically flute at side overlap shall be made of 0.50 mm TCT pre-painted high tensile gallvalume/zincalume steel grade AZ 150/G-300 having hot dipped metallic Zn- Al alloy coating (150gms/Sqm, Zinc 45% Al 55%) as per IS 15961-2012 having 300MPs yield strength with Super Durable Polyester XRW coating or equivalent as per IS 15965-2012 category 3 total coating thickness of 35 01 microns comprising of 20 microns exterior coat of SMP or superpolyster XRW on top surface & 5 micron polyester reverse on back surface over 5 micron primer coat on both surfaces and bottom liner tray made of 0.50mm TCT pre-painted high tensile gallvalume/Zicalume steel grade AZ 150/G-300 of similar specification as for the top sheet in approved colour including side and end taps. The panels shall have 30mm thick (Min) insulation core of rigid polyurethane foam 40 Kg/m3 density to the requirement of IS 12436-68. The panels shall be produced in a continuous process line with high pressure oscillation spray foamed insulation core. The panels of customized length shall have a return leg tongue to ensure snug and air tight joinery at bottom. The overlap side shall have an isolation tap to prevent thermal bridge. Roof and wall panels shall be fixed using stainless steel hex head self drilling fasteners as per AS 3566 class 3 or equivalent on crest of panels for connection with purlins and stitching fastener @ 300 mm c/c on all side and end laps etc. Measurement shall be based on per unit of finished laid surface area. Sealant and gaskets wherever necessary to be provided to ensure contemporary aesthetic look of international standard. Roofs of buildings, Canopy and side cladding, gable end cladding etc all complete.
14000
1987
27818000
Designing, supplying, erecting and fixing in position 3 mm thick polycarbonate sheets of approved make texture and colour for roof lighting. Sheets to be profiled to match metal sheets described in other item 01 should include cost of laying sheet in curvature wherever required. cost to include jointing, sealing with Butyl adhesive to make it complete water tight and takes as per manufacturers specifications and cover all cost of labour, tools, plants, temporary works etc all complete. Roofs of buildings and side cladding, gable end cladding etc all complete:-
2570
2111
5425270
Designing, providing, fabricating, painting, transporting securing in position louvers with wide narrow slats as per approved drawings and instructions, complete with metal frame work in 3 mm thick steel sheet painted as per specification. Profiled sheets of louver shall be minimum 0.50 mm TCT/0.45mm BMT high tensile 01 zinc aluminium alloy coated gallvalume/zincalume steel sheet (550 MPa yield strength) having a coating of mass of 150 GSM Zn-Al alloy coating as per IS 15961-2012 finished with 20 micron approved colour coating of Silicon modified polyster (SMP)/Super polysterpaint coat on exposed surface over a primer coat of 5 micron and back coat of 5 micron on reverse side over a 5microns primer coat. Cost includes necessary fillers, seals flashing, rubber strip nosing to slats complete in all respects. Payment shall be based on area measured with in frame work of louvers units.
930
3145
2924850
Providing & fixing permanently colour coated trapezoidal profiled sheet of depth 28-35 mm deep and 200- 300mm pitch distance with precisely engineered "rib & Flute" design with 950-1050 mm effective cover width matching to profile of PUF panels. Profiled sheets shall be minimum 0.50 mm TCT/0.45mm BMT high tensile zinc aluminum alloy coated gallvalume /zincalume steel sheet (550 MPa yield strength) having a coating of 01 mass of 150 GSM Zn-Al alloy coating as per IS 15961-2012 finished with 20 micron approved colour coating of Super Durable Polyester XRW coating or equivalent paint, coat on exposed surface over a primer coat of 5 micron and back coat of 5 micron on reverse side over a 5 microns primer coat. There shall be 2 small ribs/square flutes between profiles for providing additional strength. The sheet to be fixed over the purlins/girts with hexagonal need self drilling suitable fasteners with EPDM washer on crests of the sheet @ 300mm c/c on all sides and end laps etc. Measurement shall be based on per unit of finished laid surface area. Sealant and gaskets wherever necessary to be provided to ensure contemporary aesthetic look of international standard.
3000
838
2514000
Supplying, erecting & fixing of Gantry rails of section CR 100/CR 80/CR 60 as per requirement conforming to IS:3443-1980 including supplying and fixing all fixtures viz. rail clips, nut bolts, washers etc. complete in all respect.
55
116949
6432195
Pairing of rails on cess on either side of track in station yard/block section (both the rails in single rail or panels) as per direction of Engineer-in-charge. (Unit Meter Read as Track Meter)
1000
11
11990
Creating stipulated gap and placing rails on wooden block for SKV welding (25 mm gap) for welding of rails as per direction of engineer-in-charge at site including labour,tools etc. (Unit Meter Read as Track Meter)
1000
13
13020
Carrying and spreading of BG PSC sleepers at uniform spacing already unloaded in Station 01 yard/Block section/level crossing on the slope of bank in main line/loop line as per direction of Engineer-in-charge including all leads/lifts, ascent, descent, crossing of track and other obstruction with contractor vehicle tool & plants.
1540
60
92723.4
Placing of B.G. PSC sleepers in position on level ballast bed at specified spacing and correct alignment by lifting from slope of the bank/cess with contactor tools and labour per direction of Engineer-in- charge.
1540
24
37191
Carrying rails of varying section by dip lorry/rail dolly/rail tongue or any other means supplied by the contractor including loading and unloading rails of various section and length with all lifts/descents, crossing of tracks, obstruction etc. with/without block protection. (a) Upto a distance of 1 KM.
-
573
69333
Carrying rails of varying section by dip lorry/rail dolly/rail tongue or any other means supplied by 01 the contractor including loading and unloading rails of various section and length with all lifts/descents, crossing of tracks, obstruction etc. with/without block protection. (b) Extra over (a) above for lead beyond 1 km and up to 2 km.
-
151
18271
Carrying rails of varying section by dip lorry/rail dolly/rail tongue or any other means supplied by 01 the contractor including loading and unloading rails of various section and length with all lifts/descents, crossing of tracks, obstruction etc. with/without block protection. (c) Extra over (a) & (b) above for lead beyond 2 km and up to 3 km.
-
150
18150
Dismantling of existing track consisting of 90R/52Kg/60 kg rail section on any type of sleeper. The 01 work shall include:- Opening/removing of all filling & fastenings, classification, segregation and stacking of released materials at safe distance within free load of 100 m with all lift, descent crossing of track and any other obstruction. Cleaning of area below track after removal of track. The work to be done under block protection. (a) Standard B.G. track. (Unit Meter Read as Track Meter)
-
114
57000
Dismantling of existing track consisting of 90R/52Kg/60 kg rail section on any type of sleeper. The 01 work shall include:- Opening/removing of all filling & fastenings, classification, segregation and stacking of released materials at safe distance within free load of 100 m with all lift, descent crossing of track and any other obstruction. Cleaning of area below track after removal of track. The work to be done under block protection. (b) 1 in 8-1/2 points & xing
-
7520
15040
Linking BG track in straight/curves excluding level crossings in main line, loops, overshoots, with 01 M+7/M+4 PSC sleeper density including lifting 52KG/60kg single rails/SWP/LWR from cess and placing on PSC sleepers, cleaning, oiling and greasing fish plates, fish bolts, ERC etc. with contractors oil, grease and graphite, initial packing, boxing and dressing of ballast as per specified standard to true profile, alignment and levels as per direction of Engineer-in-Charge .(Unit Meter Read as Track Meter)
1000
210
210000
Carrying and spreading of PSC turn out sleepers and SEJ sleepers already unloaded in station 01 yard/level Xings as per direction of Engineer-in-charge including all leads, lifts, descent, crossing of track and other obstruction. 1:8.5,
2
8683
17366
Assembling, linking and laying P&C, S.E.J & DS standard layout as per drawing/specifications including leading of materials from stacks/P.W.I's stores in yard, Cutting, drilling , Jim, crowing of rails as required, fixing stretcher bars and spring levers, two round of through packing, boxing and dressing of ballast to 01 true profile, cleaning, oiling and greasing of fish plate, fish bolts, fishing surface of joints, elastic rail clips with contractors oil, graphite etc. as per direction of Engineer-in-charge (Note 75% of payment will be made after the assembly is completed and laid. Balance 25% will be paid after completion of all other activities as per item. where ever the space is available, pre-assembly of switch may be done near the site and slewed in final position during traffic block). 1: 8.5,
2
45066
90132
One round of consolidation packing of entire set of points and crossing including switches assembly, crossing and approach sleepers as per IRPWM and direction of engineer-in-charge at site. 1:8.5,
2
4329
8658
Lifting of track of linked tack up to 150 mm in one stage, including pulling of ballast from shoulders 01 or cess and putting it on the track, initial through packing and dressing and boxing of ballast to make the tack fit for 20 KMPH inclusive of free lead of 100 m, all lead, lifts, ascent, descent, crossing of track obstruction etc on concrete sleepers. (Unit Meter Read as Track Meter)
500
81
40565
Cutting of rail with hack-saw blade/rail cutting machine in station yard/block section as per direction of Engineer-in-charge.(Note: No payment shall be made for incorrect cuts).
320
108
34800
Drilling 32 mm/25mm. fish bolt holes in rail and chamfering in station yard/block section as per track manual and direction of Engineer-in-charge. (Note: No payment shall be made for incorrect holes).
640
60
38579.2
Fabricating and erecting dead ends, rail fencing etc. including painting with at least two coats of synthetic enamel paint and one coat of red oxide primer with contractor's own tools and plants, labour, lead and lift etc complete as per direction of engineer in charge.
2
4583
9166
Re-alignment of curve/slewing of track to achieve specified alignment, gauge, cross level etc. as 01 per tolerance and complete in all respect including through packing to make track fit for 20 KMPH speed. The rate is inclusive of the cost for collection of ballast and packing as per requirement of new alignment of track as per instruction of Engineer-in-charge. Upto 2.6 Meter.(Unit Meter Read as Track Meter)
100
214
21400
Supply of petrol, labour skilled & unskilled and one electric generator of required capacity in 01 working condition for welding of rail 52 kg by SKV process, Rate shall be inclusive of supply of labour, petrol, Hydraulic oil or welding Grinding as per specification, filing, Grinding etc. the welded joint on top and gauge face as per IRPWM to full satisfaction of site in charge under within/without traffic block .(Unit Meter Read as joint)
160
1364
218240
Fixing of guard Rail including cutting, notching, drilling of holes, bending etc. inclusive of lead upto 100 m, all lift/descnt/crossing of track etc. in via-duct/ballasted deck/composite girder bridge etc. with PRC sleepers provided with arrangement for guard rail.
50
73
3680.5
Making check rails of level crossing by cutting and bending rails, cutting flange, making notches/windows for fixing ERCs/other fastening at PSC sleeper and fixing the same in the track on level crossing and as per directions of Engineer-in charge. 1 set comprises of both left and right check rails of one track.
2
15575
31150
First round of through packing of PSC sleeper track as per IRPWM to correct level and alignment as per direction of Engineer-in-charge (for loop line & sidings).(Unit Meter Read as Track Meter)
1000
41
41630
Second round/additional round of through packing of PSC sleeper track as per IRPWM to correct level and alignment as direction of Engineer-in-charge (for loop line & sidings). (Unit Meter Read as Track Meter)
1000
37
37470
Greasing of ERC of main line track by using grease graphite to the specification IS408-1981 Gr O as per procedure as mentioned in para 1411(5)(b) of IRPWM and as per satisfaction of site in charge. The rate also includes the supply of grease.
6160
5
33140.8
Transporting of new /SH/Released P.Way materials including loading, unloading and placing/stacking of Rails and Ordinary Sleepers, special type PSC (60 kg) sleepers for LCs, Sejs, T/Outs, Bridge sleepers/Sharp curve (Other than Sleeper Factory) and fittings etc from any location to the section specified in 01 the scope of work with contractor's own trailers, trucks, cranes, labours, plants and construction, all lead and lift etc and all types of taxes etc complete. Nothing extra shall be payable other than the rate accepted. The entire work shall be done as per direction of Engineer in charge. The sleeper has to be spread/stacked at the yard as per the direction of Engineer in charge. (a)Transportation of new/SH P.Way Material (a) Upto 1 KM. Loading, unloading and stacking of other than Rails, Sleepers and Points & Crossing will be done without mechanical means, the payments shall be made @ 50% of accepted rate for this item.
-
451
45100
Transporting of new /SH/Released P.Way materials including loading, unloading and placing/stacking of Rails and Ordinary Sleepers, special type PSC (60 kg) sleepers for LCs, Sejs, T/Outs, Bridge 01 sleepers/Sharp curve (Other than Sleeper Factory) and fittings etc from any location to the section specified in the scope of work with contractor's own trailers, trucks, cranes, labours, plants and construction, all lead and lift etc and all types of taxes etc complete. Nothing extra shall be payable other than the rate accepted. The entire work shall be done as per direction of Engineer in charge. The sleeper has to be spread/stacked at the yard as per the direction of Engineer in charge. (b) Extra over (a) above for each additional KM ( lead beyond 1 km)
-
5
2865
Alumino thermit welding of rail joints by short pre-heat welding technique by SKV process complete in all respect in connection with IRS specification No. T-19-1994 for fusion welding , read with all correction slips 01 issued thereto, of rail joints for conversion in SITU single rail/short welded panels to short short welded pannels / long welded rails (LWR/CWR) by compressed air blower pre-heating system including the rates to trimming and grinding of rail joints by hydraulic welding trimmer and rail profile grinding machine. Rate shall include supply, transportation of portions and consumables from supplier's production facility to nominated PWI store. 52Kg/90 UTS Rail, single rail to SWR/LWR
160
3194
511040
Manufacturing, erecting and painting BG dead-ends in the station yards as per drawing including all lead, lift, descent, crossing lines, stacking etc complete as per direction of Engineer-in-charge.
2
4583
9166
Supplying, fabrication, laying fitting & fixing of track of Traversor consisting of 3 rails (one main rail & 2 auxilary rails of single rail/SWR type) which includes supply, fabrication cutting & drilling holes and laying of base plate in correct positions with primer alignment, supplying of CI blocks and fixing with 20mm dia hozontal bolts at 750mm (max.) c/c by drilling the holes in rails, supplying and fixing holding down bolts 25mm dia in 01 correct location and alignment at 750mm (max.) c/c matching with base plates as per latest approved drawing, collecting (guard rail and main rail) from stock yard, pairing , butting, inserting of rails by cutting and drilling holes as required, distribution of small fitting, lubrication of fish plate and fish bolt by grease and oil etc. complete job with contractor labour, material, consumable welding, cutting, drilling, all lead, lift ascend, decend, crossing the track etc as required as per approved drawing and instruction of Engineer at site Note:-(1) Rail, fish plate, fish bolt will be supplied by Railway free of cost. (2) Structural steel shall be make SAIL/ TISCO/ IISCO/RINL/JINDAL. The cost includes testing of material from approved laboratory by Railways.(Unit Meter Read as Track Meter)
84
22636
1901424
Supplying, fabrication, laying fitting & fixing of embeded track (of single rail/SWR type) which includes supply, fabrication cutting & drilling holes and laying of base plate as per aproved drawing supplying, fixing of holding down bolt at correct location and alignment at spacing of 750mm (max.) c/c with washers etc. as required, supplying and fixing of guard angles of size 75x75x8 collecting and leading of rails from stock yard 01 pairing , butting of rails, inserting of rails by cutting end and drilling two holes at each end, distribution of small track fitting, oiling and greasing of fish plate and fish bolt etc. complete job with contractor labour, material, consumable, equipment, all lead, lift ascend, descend, crossing the track etc as required as per approved drawing. Note:-(1) Rail, fish plate, fish bolt will be supplied by Railway free of cost. (2) Structural steel shall be make SAIL/TISCO/IISCO /RINL/JINDAL . The cost includes testing of material from approved laboratory by Railways. (Unit Meter Read as Track Meter)
545
9116
4968220
Supplying, fabrication, laying fitting & fixing of embeded track (of single rail/SWR type) which includes supply, fabrication drilling of holes and laying of base plate as per aproved drawing supplying, fixing of holding down bolt at correct location and alignment at spacing of 750 mm (max.) c/c with washers etc. as required, supplying and fixing of guard angles of size 75x75x8 (provided 2 nos angles, one on outer side of each 01 rails) in inspection pit , collecting and leading of rails from stock yard pairing & butting of rails, inserting of rails, cutting end and drilling two holes at each end, distribution of small track fitting, oiling and greasing of fish plate and fish bolt etc. complete job with contractor labour, material, consumable, equipment, all lead, lift ascend, descend, crossing the track etc. as required as per approved drawing. no. ST/1/EM-Track//201(rev-1) dt 17-02- 10 for track fixing and or as per instruction of engineer at site Note:-(1) Rail, fish plate, fish bolt will be supplied by Railway free of cost. (2) Structural steel shall be make SAIL/TISCO/IISCO /RINL/JINDAL. The cost includes testing of material from approved laboratory by Railways.(Unit Meter Read as Track Meter)
50
4885
244250
Supply and application of Polysulphide, preparation of groove of 5 mm to 10 mm wide and 25 mm depth in both horizontal and vertical lines spaced @ 6m c/c and 4m c/c in VD floor.
3650
210
766500
Providing & Fixing half round 50 mm valve for water pipeline in washing line.
15
4053
60795
Providing Wall Putty('Birla white' Or 'J.K white' wall Putty) of thickness 2 mm or more , over newly 01 plastered surface of wall to make it smooth finish including all the material & labour charges, scafolding for multi- storey buildings and sand papering to make it complete in all respect, for painting /distempering/ plastic paint /weather-coat etc.
2000
121
242040
Supplying and stacking of 65mm nominal size machine crushed stone track ballast confirming to RDSO's specification for track ballast IRS-GE-1- June 2004 with upto date correction slip between the track at 01 different location as directed by Engineer-in-charge including all taxes, royalty , S.T. and other leviable by local state and Central Authority, including carriage with all lead and lift, ascent, descent, crossing of track, nallah etc. rehandling if any and stacking as per instruction of Railway's representative with contractor's labour, tools and plant etc complete.
1550
1558
2414900
Picking up of stone ballast from stacks, leading the same including spreading uniformly on BG 01 formation as per BG profile (Latest RDSO/P.Way manual/Circulars) including dressing and boxing etc. complete including all lead including crossing of one or more track etc. complete. Nothing extra shall be paid for labour wastages in case trains are stabled in the yards. (a) Lead up to 100m
-
1550
187503.5
Picking up of stone ballast from stacks, leading the same including spreading uniformly on BG 01 formation as per BG profile (Latest RDSO/P.Way manual/Circulars) including dressing and boxing etc. complete including all lead including crossing of one or more track etc. complete. Nothing extra shall be paid for labour wastages in case trains are stabled in the yards. (b) Extra for lead beyond 100 m but up to 500 M
-
1000
17950
Supplying, Laying, jointing, Testing and commissioning of heavy gauge M.S. pipes as per relevant 01 IS: 1239 with special accessories like tree, elbows, flanged joints rubber insertion nuts & bolts including earth work excavating and treating underground pipe with two coats of tar coal hot enamel paint and wrapping with bituminized 4 mm thk COATAK reinforced fiber glass tissue complete in all respects as per ISI 10221. (Underground) (a)100 mm dia
-
1403
42090
Supplying, Laying, jointing, Testing and commissioning of heavy gauge M.S. pipes as per relevant01 IS: 1239 with special accessories like tree, elbows, flanged joints rubber insertion nuts & bolts including earth work excavating and treating underground pipe with two coats of tar coal hot enamel paint and wrapping with bituminized 4 mm thk COATAK reinforced fiber glass tissue complete in all respects as per ISI 10221. (Underground) (b)150mm dia
-
2571
514200
Providing, fixing, welding, jointing and testing of heavy class MS pipes as per relevant IS with 01 special accessories Tees, elbows, flanged joints, rubber insertion, nuts, bolts or welded joint with flange joint on bends, 2 length of straight pipe including fixing the pipe with suitable flat iron strip clamps/brackets structural members dash faster, civil breakage making good the same etc painting with a primer coat and two coats of postal red enamel etc complete as required. (above ground) (a)80 mm dia
-
1845
18450
Providing, fixing, welding, jointing and testing of heavy class MS pipes as per relevant IS with 01 special accessories Tees, elbows, flanged joints, rubber insertion, nuts, bolts or welded joint with flange joint on bends, 2 length of straight pipe including fixing the pipe with suitable flat iron strip clamps/brackets structural members dash faster, civil breakage making good the same etc painting with a primer coat and two coats of postal red enamel etc complete as required. (above ground) (b)100 mm dia
-
2936
29360
Providing, fixing, welding, jointing and testing of heavy class MS pipes as per relevant IS with 01 special accessories Tees, elbows, flanged joints, rubber insertion, nuts, bolts or welded joint with flange joint on bends, 2 length of straight pipe including fixing the pipe with suitable flat iron strip clamps/brackets structural members dash faster, civil breakage making good the same etc painting with a primer coat and two coats of postal red enamel etc complete as required. (above ground) (c)150mm dia
-
3898
38980
Providing, fixing, welding, jointing and testing of heavy class MS pipes as per relevant IS with 01 special accessories Tees, elbows, flanged joints, rubber insertion, nuts, bolts or welded joint with flange joint on bends, 2 length of straight pipe including fixing the pipe with suitable flat iron strip clamps/brackets structural members dash faster, civil breakage making good the same etc painting with a primer coat and two coats of postal red enamel etc complete as required. (above ground) (d)200mm dia
-
5887
58870
Providing and Fixing weather proof standard hose cabinet (900 mm x 600 mm x 400 mm) outdoor type suitable for accommodating yard hydrants made of 1.5 mm thick M.S. sheet having central opening glazed 01 door including necessary locking arrangements, painting one coat of primer and two coats of postal red enamel paint suitable for housing 2 Nos. canvas hose pipe and branch pipe. (The cabinet shall be floor mounted on suitable raised platform). The shutters are to be lockable type. The works "hose cabinet" to be painted on the box.
5
4906
24530
Providing and fixing the 150mm dia four way fire brigade connection with flange joints complete
2
14843
29686
Providing and fixing non-return valve complete with bolts, nuts washer & rubber insertions as required conform to IS: 5312 . (a)100 mm dia
-
10662
10662
Providing and fixing non-return valve complete with bolts, nuts washer & rubber insertions as required conform to IS: 5312 . (b)150 mm dia
-
18678
37356
Providing and fixing 0-14 kg pressure gauge of 150 mm dia
2
1097
2194
Supplying & Installation of electric driven fire pump suitable for automatic operation consisting of the following (as per CPWD specification for fire fighting and its amendments) (a)Fire pump set split casing type with bronze impeller, CI casing centrifugal having a capacity of 2850 liters/minute against a total head of 40 m so 01 as to ensure a minimum pressure of 3.0 Kg/cm2 at the highest and farthest outlet at specified flow complete with pressure gauge and pressure switch on the delivery side including by pass arrangement for periodical testing of the working of the pumping set as required. The pump shall be provided with mechanical seals. (b)(b) TEFC induction motor suitable for operation on 320/440V, AC supply air cooled for effective cooling with synchronous speed of 3000/2900 RPM and flexible coupling. The pump motor should confirm to IS: 325 -1978
1
542093
542093
Supplying & Fixing of diesel engine driven fire pump suitable for automatic operation consisting of the following (as per CPWD specification part v -1985) for fire fighting and its amendments) a)Horizontal centrifugal type multi stage, fire pump with bronze impeller suitable for delivery of 2850 ltrs/minute at a total head 01 of 50 m so as to ensure a minimum pressure of 3.0 Kg per sqcm at the highest & farthest outlet at the specified flow complete with necessary strainer foot valve in suction side and pressure gauge on the delivery side etc including by pass arrangement for periodical testing of the working of the pump set as required. The pump shall be provided with mechanical seals. b) water cooled cold starting type multi cylinder 4 stroke diesel engine, developing suitable BHP at 1800 RPM for the above pump set with automatic starting mechanism, cooling system shall be with radiator cool engine, maintenance free batteries, battery charge unit, flexible coupling with the pump, common bed plate for mounting diesel engine fuel day tank fuel piping and pump and vibration damping arrangement by cushy foot mounting as required complete in all respects. the engine shall be capable to drive the pump at 150% rated discharge at 65% head and shall be suitable for 10% over load capacity for one hour in any period of 12 hour continuous run. (i) Common bed plate fabricated from mild steel channel or cast iron type vibration damping arrangement with cushy foot mounting as required.
-
504266
504266
Supplying & Fixing of diesel engine driven fire pump suitable for automatic operation consisting of the following (as per CPWD specification part v -1985) for fire fighting and its amendments) a)Horizontal centrifugal type multi stage, fire pump with bronze impeller suitable for delivery of 2850 ltrs/minute at a total head of 50 m so as to ensure a minimum pressure of 3.0 Kg per sqcm at the highest & farthest outlet at the specified flow complete with necessary strainer foot valve in suction side and pressure gauge on the delivery side etc including by pass arrangement for periodical testing of the working of the pump set as required. The pump shall 01 be provided with mechanical seals. b) water cooled cold starting type multi cylinder 4 stroke diesel engine, developing suitable BHP at 1800 RPM for the above pump set with automatic starting mechanism, cooling system shall be with radiator cool engine, maintenance free batteries, battery charge unit, flexible coupling with the pump, common bed plate for mounting diesel engine fuel day tank fuel piping and pump and vibration damping arrangement by cushy foot mounting as required complete in all respects. the engine shall be capable to drive the pump at 150% rated discharge at 65% head and shall be suitable for 10% over load capacity for one hour in any period of 12 hour continuous run. (ii) Installation, testing and commissioning of the item 9 (i) above including making foundation as per manufacturer's recommendation.
-
18884
18884
Supplying and Installation of electric driven fire pump suitable for automatic operation consisting of the following as per CPWD specification for fire fighting and its amendments. (a) Fire pump set with bronze impeller, CI casing centrifugal end suction type multi/single stage having capacity of 180 ltrs/minute against a total 01 head of 40 m so as to ensure a minimum pressure of 3.0 Kg/sqcm at the highest and farthest outlet at the specified flow complete with pressure gauge and pressure switch on the delivery side including bypass arrangement for periodical testing of the working of the pumping set as required. The pump shall be provided with mechanical seals. (b) TEFC induction motor suitable for operation on 320/440V, AC supply air cooled for effective cooling with synchronous speed of 3000/2900 RPM and flexible coupling. The pump motor should confirm to IS: 325 -1978
1
223316
223316
Supply, installation, testing and commissioning of main control panel fabricated from 2mm thick MS sheet (powder coated) installed in basement for main pump, Jocky pump and diesel engine driven pump comprising of one TP & NL 100 amp MCCB (incomer), 150 amp bus - bar, one No star-delta starter for 75 HP 01 motor, 1 no TP and NL 100 amp MCCB for main pump, One No DOL starter for Jocky pump, one No 40 amp TPN MCB for Jocky pump, phase indication lights, Voltmeter, Ammeter with CT, auto/manual switch one for each motor, necessary interlocking arrangement, control wiring, all wiring and earthing from panel to motor, single phase preventers one for each pumps, internal wiring, 32 amp TPN MCB for battery charging name plate engraved complete etc complete in all respects. Note: Pump and Motor should meet the additional requirements as specified in the Specifications
1
337573
337573
Supplying and installing cylindrical type air vessel of 250 mm dia, 1.2 m high fabricated out of 8 mm thick MS plate suitable for 7 Kg/sqcm. Working pressure complete with air release valve, safety valve, 01 pressure gauge etc as required. The air vessel shall be continuous welded construction and painted with two coats of postal red enamel outside over a coat of primer and epoxy paint inside. Note: Contractor should submit general arrangement drawings before fabrication of vessel and ultrosonic test report to be submitted on supply of vessel and test to be conducted at the presence of Plumbing-In-Charge.
1
22983
22983
Providing and Fixing gun metal single headed hydrants with flanged inlet with 63 mm female instantaneous outlet complete with metal blank cap & chain confirming to IS: 5290 type A with stainless steel orifice plate to keep the pressure hot more than 3.5 kg/sq. cm at any point.
5
7597
37985
Providing 63 mm (21/2 inch ) dia 30 m long reinforced rubber lined hose pipe confirming to IS 636- 1992 Part-II with gun metal male & female coupling wire wound with pipe as required.
5
8766
43830
Providing & Fixing first aid hose reel full swinging type with 40 metre long 20 mm dia rubber lined 01 Dunlop pipe with shut off nozzle of 5 mm dia. The hose reel confirming to IS :884-1969 and hose tubing to IS: 1532 complete as required including 25 mm dia M.S. pipe connection from riser to hose reel with all sockets, nipples, elbows and 25 mm dia full way valve as required.
5
18735
93675
Providing and Fixing gunmetal branch pipe with 20 mm dia nozzle confirming to IS: 903 suitable for installation connections to hose coupling etc. as required.
5
4325
21625
Provision for supply, Erection, Testing & commissioning of PVC insulated PVC sheathed armored aluminium cable with lugs, gland and all accessories (a) 3.5 core 35 sq.mm.,
150
232
34800
Providing and fixing C.I. foot valve including nuts, bolts, washers 3mm thick insertion rubber gasket including matching flanges table "E" in all respects. 100 mm dia
2
8845
17690
Providing and fixing 25 mm dia gunmetal full way valve heavy quality tested to 21 kg/cm2
2
706
1412
Supplying, fitting & commissioning manually operated fire alarm system with Agni or similar make 8 zone fire alarm main indicator control panel, ETRL tested 8 fire hooters & manual call points, all fittings like wiring material, PVC pipe, bend, tee, sidel etc complete in all respect.
2
158568
317136
Supply, fixing, testing and commissioning of Y- strainer valve PN-1.6 with Bronze/Gunmetal seal duly ISI marked complete with nuts, bolts, washers, gasket confirming to IS 13095 of size 100/150 mm dia
1
9722
9722
Supplying, laying & jointing G.I. Pipe (medium) ISI marked {IS: 1239 (Part - I):1990} including 01 followings a) Supply of cotton thread, white zinc for making pipe joints. b) Cutting, threading pipes as and where required. c) Lead of all materials to the site of work. d) Excavation of trenches upto 1 metre deep in all kind of soil which do not required ballasting. e) Keeping pipes level or in prescribed grade for aligning pipes. f) Refilling and ramming trenches after pipes have been tested to required pressure. 150 mm dia.
30
1574
47220
Supplying, laying & jointing G.I. pipe fittings ISI marked (I.S.1789) including followings :- a) Supply 01 of cotton thread, white zinc for making joints. b) Lead of all materials to the site of work. c) Excavation of trenches upto 1 metre deep in all kind of soil as per items of Earthwork. d) Keeping fittings level or in prescribed grade for aligning pipes. e) Refilling and ramming trenches after fittings have been tested to required pressure. (a)G.I. Bend 150 mm dia.
-
1930
7720
Supplying, laying & jointing G.I. pipe fittings ISI marked (I.S.1789) including followings :- a) Supply 01 of cotton thread, white zinc for making joints. b) Lead of all materials to the site of work. c) Excavation of trenches upto 1 metre deep in all kind of soil as per items of Earthwork. d) Keeping fittings level or in prescribed grade for aligning pipes. e) Refilling and ramming trenches after fittings have been tested to required pressure. (b)G.I. Elbow 150 mm dia.
-
1873
7492
Supplying, laying & jointing G.I. pipe fittings ISI marked (I.S.1789) including followings :- a) Supply 01 of cotton thread, white zinc for making joints. b) Lead of all materials to the site of work. c) Excavation of trenches upto 1 metre deep in all kind of soil as per items of Earthwork. d) Keeping fittings level or in prescribed grade for aligning pipes. e) Refilling and ramming trenches after fittings have been tested to required pressure. (c)G.I. Tee 150mm x 150mm x 150mm dia.
-
2347
4694
Supplying, laying & jointing G.I. pipe fittings ISI marked (I.S.1789) including followings :- a) Supply 01 of cotton thread, white zinc for making joints. b) Lead of all materials to the site of work. c) Excavation of trenches upto 1 metre deep in all kind of soil as per items of Earthwork. d) Keeping fittings level or in prescribed grade for aligning pipes. e) Refilling and ramming trenches after fittings have been tested to required pressure. (d)G.I. Socket 150 mm dia.
-
631
3155
Supplying, laying & jointing G.I. pipe fittings ISI marked (I.S.1789) including followings :- a) Supply 01 of cotton thread, white zinc for making joints. b) Lead of all materials to the site of work. c) Excavation of trenches upto 1 metre deep in all kind of soil as per items of Earthwork. d) Keeping fittings level or in prescribed grade for aligning pipes. e) Refilling and ramming trenches after fittings have been tested to required pressure. (e)G.I. Reducing Tee 150 mm x150 mmx100 mm dia.
-
2278
4556
Supplying, laying & jointing G.I. pipe fittings ISI marked (I.S.1789) including followings :- a) Supply 01 of cotton thread, white zinc for making joints. b) Lead of all materials to the site of work. c) Excavation of trenches upto 1 metre deep in all kind of soil as per items of Earthwork. d) Keeping fittings level or in prescribed grade for aligning pipes. e) Refilling and ramming trenches after fittings have been tested to required pressure. (f)G.I. Flange with necessary MS nuts & bolts 150 mm dia
-
623
1246
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6 with bronze/Gunmetal seal duly ISI marked complete with nuts, bolts, washers, gaskets, confirming to IS: 13095 of size 100/150 mm
2
10520
21040
Motorised Double Leaf Sliding Gate Supply and installation of Steel Sliding gate with Gate operator -Double leaf sliding gate of size (clear width 10m, clear height 3.0m) Outer frame 100x100x3mm square section Inner vertical 32x32x2.5mm square section Support column100x100x3mm with support nylon roller 100x50 01 Bottom track 125x65 ISMB with 25mm bright bar welded. Bottom Roller 100 mm dia with both side bearing and stud100 mm spikes at top Paint- One coat of epoxy primer and two coat of Synthetic Enamel Paint by spray. Gate Operator Electrical Data Power Supply:230/50 Absorption(A) :3 Power(W):700 Performance data Speed(m/s):0.17 Force(N): 1110 Work Cycle(Cycles/hour):42 Dimension and General Data Protection level (IP):44 Working temperature(° C min/max):-20/+50 Dimensions(mm): 400x255x390h Weight (Kg): 24.5 Metal rack, Yellow Flashing light, Photo sensor, Three way push Button and Remote Control.
-
690499
690499
Swing Gate 1.5M (W) x3.00M (H) Supply and installation of Steel Swing Gate Outer frame 100x100x3mm square section Inner support 32x32x5mm square section Top Pivot Hinges with Ball bearing 01 Bottom Pivot Hinges with Thrust bearing Support nylon Roller Bottom Roller 100 mm dia with bearing and stud and 5mm laser cut plate fitting 400mm long with Aldrop 25mm Bright bar welded. Tower Bolt 600mm with 25mm Bright bar welded. Paint- One coat of epoxy primer and two coat of Synthetic Enamel Paint by spray. All Hardware Plated
-
73743
73743
Civil work
-
-
117778116.89
Dismantling & Carriage of Materials
-
-
8493042.81
Soil investigation
-
-
328143.6
Supply of Cement
-
-
45545451
Reinforcement steel
-
-
72993854.92
Design, supply, erection (with foundation), testing & commissioning of Copper wound energy efficient power distribution transformer (level-II) as per following: Rated Voltage (Line to line) : 11KV/433V Rated 1 Output : 630KVA, Type: Oil immersed, Method Of cooling: ONAN, Number of Phase: Three, Rated frequency: 50Hz, Vector group : Dyn11 naturally cooled, Service Installation: Indoor/Outdoor , Range of Taps: +5% to -10% @ 2.5%, OCTC Percentage Impedance: 4.5%, with proper System fault level System earthing : Solidly Earthed, Terminal Arrangement: 11KV side , XLPE cable arrangement, LT side: XLPE cable arrangement, Transformer shall be provided with all fittings & accessories along with marshalling box as listed in technical specification .
2
2110345
4220690
Design, Supply, erection (with support structure or foundation), testing and commissioning of 11KV 1 switch board (horizontal draw out & horizontal isolation type) consisting of 4 nos. of 1250 amps VCBs, 26.1kA with inbuilt 24 V DC auxiliary or control supply (power pack with battery backup) in each VCB Panel with all accessories like CT, PT, protective relay , Copper bus bar, wiring, instrumentation, indication lamp, energy meter, MF meter etc. complete in all respect as per technical specification
1
3849410
3849410
Design, Supply, erection (with support structure or foundation), testing and commissioning of the extensible cubicle indoor mounting, dust & vermin proof, floor mounted, suitable for IP42 sheet steel clad, Capacitor Panel( 200 KVAR) suitable for use on 3 phase 415 V 50 Hz 4 wire system as per specification including 1 all other connected accessories etc. Incoming: 400 A, 415 V, 4 Pole 50 kA MCCB within built thermal magnetic release for short circuit, over current protection with CTs- 1 No. Automatic Power Factor Relay(APFCR) with 4 Pole contactor- 1 No: 600A TPN Aluminum Bus Bar- 1 Set Outgoing: 25 kVAR Resistor Type Capacitor Bank with 50 A Contactor or MCB for switching ON or OFF complete as required- 4 Set , 50 kVAR Resistor Type Capacitor Bank with 50 A Contactor for switching ON or OFF complete as required- 2 Set. Indication Lamp for ON or OFF for both Status of Capacitor operation-4 set
1
367921
367921
Supply of 3 core 120 Sq. mm 11 kV Grade XLPE insulated PVC sheathed , Al armoured cable as per IS: 7098 complete as per spec. as required.
500
2087
1043500
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 Core, XLPE aluminum conductor cable of 11 KV grade 120sqmm HT cable.
2
15001
30002
Supply & making indoor termination of 11 KV grade 3C 120 Sq mm XLPE cable including all accessories such as heat shrinkable or push on kits etc, complete including earthing as required
7
8947
62629
Supplying and Fixing (installing) of 150mm width x100mm depth x1.6mm thichness of G I perforated painted with powder coating cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, bolts & nuts, painting suspenders on MS frame with cover etc. as required.
300
922
276600
Supply, erection (with foundation), testing & commissioning of DP structure by 02 nos. of RSJ poles 1 100X116-11 meters long with nut , bolt, washer, insulator, all connected works, pit, accessories etc., 11 KV isolating arrangement with 1250 A capacity AB switch vertical mounting type, lighting arresters of approved make fixed on DP structure with gang operated rod including all connected accessories etc. & 11 KV drop out fuse of approved make and operated rod on DP structure including all connected accessories for this GOS.
3
104231
312693
Design, supply, erection (with support structure), testing and commissioning of cubicle type 14SWG LT panel (Indoor type) with 1250 amps sectionalized electrolytic copper bus bar as per specification. All the (incoming only) ACB are should be provided with LT Tri-vector digital meters with Ammeter, Voltmeter, selector 1 switches and RYB indication lamps. LT panel board should confirm to IS-8263, ACB's and MCCB's should be confirming to IS-2516. The digital type KWH meter with CTs of suitable capacity with RS 485 port for incoming supply and digital type KWH meter with CTs of suitable capacity for each out going feeders including with all other connected accessories etc., as directed by Engineer at site , consisting 2 nos.X1250A 4 Pole ACB,65 KA Microprocessor based EDO type as incomer and 1 nos. X1250A 4 P ACB Microprocessor based EDO type, 65 KA for outgoing (common output to bus bar) with 3 Ph KWH meter and other accessories.
1
873362
873362
Design, Supply, Installation, testing and commissioning (with support structure) of cubicle type 14SWG LT panel (Indoor type) with 2400 amps sectionalized electrolytic copper bus bar as per specification. All the (incoming only) ACB are should be provided with LT Tri-vector digital meters and incoming ACB & DG set MCCB should be provided with Ammeter, voltmeter, selector switches and RYB indication lamps. LT panel board should confirm to IS-8263, ACB's and MCCB's should be confirming to IS-2516.. The digital type KWH meter with 1 CTs of suitable capacity with R.S.485 port for incoming supply and digital type KWH meter with CTs of suitable capacity for each out going feeders including with all other connected accessories etc. as directed by Engineer at site. Incoming: 2 X 1250 Amps 50 KA 4 pole ACB Microprocessor based EDO type with microprocessor released type with over current, short circuit, Earth Fault protection. (Both the ACBs are interlocked mechanically and electrically) Change over: 1 X 800 Amps 4 pole on load change over switch.1 X 800 Amps 4 pole Double Break contact MCCB. (For DG set)Out goings: 8 X 400 Amps 4 pole 36 KA MCCB,4 X 320 Amps 4 pole 36 KA MCCB, 6 X 250 Amps 4 pole 36 KA MCCB, 4 X 200 Amps 4 pole 36 KA MCCB, 2 X 100 Amps 4 pole 25 KA MCCB, 2 X 63 Amps TPMCB, 4 X 32 Amps TPMCB
1
2618501
2618501
Supply, erection, testing & commissioning of Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
20
11794
235880
Supply, erection, testing & commissioning of Earthing with G.I earth pipe 4.5 mt. long 40mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. including providing salt and charcoal for pipe earth electrode as required.
60
5308
318480
Design, Supply, Installation, testing and commissioning of Fire detection System for unit substation each set consisting of Smoke detectors 4 nos, Normal Beam Heat detectors 4 nos, Manual call point response - 1 1 no, Audio visual alarm 1 no, Control Module 1 no, Fire Alarm Control Panel with Display- 1 no, Loop interface board(signaling line Circuit) - 1 no, Fire Alarm Repeater/ annunciator panel - 1 no, Response Indicator - 1 no, Ethernet bridge ( If the PLC Panel's Ethernet bridge can be utilized, it need not be separate) with all connected accessories like wiring, cabling, clamping etc.
1
392323
392323
Supplying and installing following size of perforated painted with powder coating M.S. cable trays 1 with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts& nuts, painting suspenders etc. as required. a)300mm widthX50mm deep X1.6mm Thick
-
621
15525
Supplying and installing following size of perforated painted with powder coating M.S. cable trays 1 with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts& nuts, painting suspenders etc. as required. b)450mm widthX50mm deep X 2mm Thick
-
700
17500
Supply & Fixing of 6 mm thick MS chequered plate including the MS angle support on the trench of the sub-station equipment complete as required
1500
119
178500
Supply and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
30
1009
30270
Supply and laying earth connections from earth electrode with 4.00 mm. dia copper wire in 15 mm. dia. GI pipes from earth electrode as required.
15
257
3855
Supply & fixing of : i. shock treatment chart duly framed (Bilingual Hindi & English, ii. Tool Box with following items: 1Set make Tapariya, Jhalani,etc. :- a. open Jaw spanner -12 Nos. 6/7, 8/9,10/11, 12/13, 14/15, 16/17, 18/19, 20/22, 21/23, 24/27, 25/28, 30/32) b. ring spanner-12 nos.6/7, 8/9,10/11, 12/13, 14/15, 16/17, 1 18/19, 20/22, 21/23, 24/27, 25/28, 30/32) c. Ball Hammer-01 nos. d. Hexa frame- 01 nos. e. C. Plier 210mm-01 nos. f. Chiesel 22 x 200mm-01 nos. g. Screw driver 200mm-01 nos. h. Round File 200mm-01 nos. i. Flat file 150mm-01 nos. j. Rachet socket spanner ( Rachet-01 Nos. ,Handle-03 ,Socket-01 Nos)-01 set } iii. Key Board: 1 Set iv. First Aid Box: 1 Set v. Fire /Sand Bucket with stand: 1Set vi Pair of Insulated gloves: 1 Set vii. Set Earthing rods: 1 Set viii. HT and LT Danger Board: 1 Set
1
47897
47897
Horizontal drilling of bores for 11KV HT cables
20
2456
49120
Supply and erection of GI pipe of 150mm dia. of 'B' Class.
100
1187
118700
Supplying and erection (fixing) cable route marker with 10 cm X 10 cm X 5mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required with foundation.
25
383
9575
Supply and fixing 25 mm X 5 mm GI strip on surface or in recess for connections etc. as required.
100
206
20600
Supply & erection (with support structure) of DCP type Fire Extinguisher (9Kg) for B Class Fire in sub-stations as per IE Rules and conformity to Fire regulations as required.
4
3800
15200
Supply ,erection ,testing and commissioning of PVC insulated copper conductor 10 core 2.5 Sq.mm armored control cabling/ wiring in open duct/ pipes/ on surface/in ground etc. as required for complete controls/ audio visual annunciation/ trip system / watering system etc. for above.
100
574
57400
Supply, erection, testing and commissioning of Hydraulic pinion extractor capacity 40,000 PSI (Max.) with 2 mtr long flexible mounted on U frame. Make crimpwell/vankos/orione Hydraulics
1
123227
123227
Supply, erection, testing and commissioning of Microprocessor based Gas CHROMATOGRAPH FOR DISSOLVED GAS ANALYSIS (DGA) plant of transformer oil as per RDSO special maintenance instruction no. RDSO/ELRS/SMI/138, Make: CIC/Nucon
1
1071114
1071114
Supply, fixing,testing and commissioning of 1400mm sweep bldc ceiling fan Havells model no 1400 mm FAN EFFICIENCIA NEO IVORY Or equivalent with electronic regulator. Make as per TS.
100
4000
400000
Supply, Fixing, Testing & commissioning of board with 5 pin socket (plug point) 5/6 A (04 No) , switch of 6 Amp (04 No) and kit kat fuse or MCB.
100
699
69900
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A switch, connections etc. as required
125
495
61875
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
250
401
100250
Supply, Installation, Testing & Commissioning of heavy duty bracket type 750 mm sweep air 1 circulator fan single phase RPM 1400 three blades suitable for 220-240 V, 50Hz. Air circulating fan should be wall mounting/MS pillar mounting. The air-circulating fan will be mounted/fixed on MS pillar (in shop shed) with MS flats 50x6 mm size clamps bolts & nuts complete in all respect. Make- Havells , Model-Turbo force Wall (FHACWSTSCL30). Or Equivalent make of Bajaj, Usha.
50
9999
499950
Design, supply, erection, testing & commissioning of 150 W, LED based high bay shed Light Fitting complete with lamp. Make-. CROMPTON Model SURROUND NEO LHB11-150-CDL@47<45@M OR equivalent complete with all accessories or equivalent make of Bajaj, Philips.
80
14900
1192000
Supply, erection, testing & commissioning of outdoor shrouded type DSL (with copper conductor), 1 Heavy duty, DSL as per technical specification. To be supplied & erected by supplier along with 14 no's 6m approx. High supporting Mast, Insulator etc as per T.S. 01 M length consist of 01 m length of 4 run i.e 3 phase & neutral.
168
20000
3360000
Supply, erection, testing & commissioning of LED flood light luminary 60 Watt . Make- Havells, Model-JETAQUANTOPLUSFLP60WLED757SYM) OR equivalent make of- Bajaj, Crompton, PHILIPS. Complete with all accessories.
100
5400
540000
Supply, erection, testing & commissioning of 1x18W LED tube light fitting M/s. Havells model No. TITANIANEO1213T8SSTL18WLED86SPC+REGAL BATTEN5UPT01X18WDSBSWH complete including LED lamp of 18 watts with all other connected accessories etc. or equivalent model of approved list.
300
1553
465900
Pit lights: Design, fabrication, supply, erection, testing & commissioning of LED based luminary having input voltage 40V - 72V AC, frequency 50/60 Hz, Input Power 16 watt with IP 67 enclosure & Impact 1 protection IK 10 with High brightness, high intensity with an efficiency of 80 lumens/watt & with proper ON/OFF and locking arrangements . The luminaries shall be designed such a way to illuminate the under frame of the coach and path lighting of pit line. The cubicle shall be fabricated with MS sheet / Poly carbonate body with high built of epoxy coating, heat resistive up to 70 degree centigrade complete with weather proof and rust proof. Fixture shall be IR-GOLD-C1 of M/s Goldwyn Limited or equivalent. Make shall be as per T.S
40
2782
111280
supply, erection, installation, testing and commissioning of 5 KVA , 220V/48 V, single phase, natural air cooled, copper wound auto transformer as per IS in a weatherproof enclosure(with support structure) with input and output MCB protection, input and output terminal block, & indicator
2
30990
61980
Supply, erection(with foundation/support structure), testing and commissioning of weather proof feeder pillar ( LT panel board outdoor type floor mounted ) 14 SWG CRCA sheet with powder coated painting and 1 IP-55 class of insulation having hinged door and locking arrangement rubber gasket, extensible from both sides, suitable for 3 phase four wire 500 volts 50 HZ, with Cu bus bar complete in all respect and confirming to latest relevant ISI specification, earthing making etc. complete as required with Incomer- MCCB 250 A, 4- pole-1 no and Outgoing MCCB 100 A, 4 pole - 06 nos with multifunctional energy meter 3 ph, 4 wire-01 no EMFIS series .
4
93489
373956
Supply, erection (with foundation/support structure), testing and commissioning of weather proof feeder pillar ( LT panel board outdoor type floor mounted ) 14 SWG CRCA sheet with powder coated painting and 1 IP-55 class of insulation having hinged door and locking arrangement rubber gasket, extensible from both sides, with Cu bus bar, suitable for 3 phase four wire 500 volts 50 HZ, in all respect and confirming to latest relevant ISI specification, earthing making etc. complete as required with Incomer MCCB 250 A, 4- pole-1 no. and Outgoing MCCB 100 A, 4 pole,08 no. with multifunction energy meter.
4
123213
492852
Supply, Installation, Testing & Commissioning of Exhaust Fan 300mm sweep size, 1400 rpm 1 suitable for 230V, 50Hz supply Make-Crompton Model- EXHD300-4-1 or equivalent. Make- Bajaj, Usha. Complete with mounting frame and louvers including suitable size of holes for fixing exhaust fan connection complete as required.
50
4851
242550
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
700
783
548100
Wiring for circuit/ sub main wiring along with earth wire with2 X 6 sq. mm + 1 X 6 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
3000
249
747000
Wiring for circuit/ sub main wiring along with earth wire with 2 X 4 sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
3000
200
600000
Wiring for circuit/ sub main wiring along with earth wire with 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
3000
167
501000
Supply, fixing, connecting and commissioning of catenary with 5 nos. copper wire with PVC insulation 4 sq mm & 1 no 2.5 sq mm .
400
189
75600
Laying of all size cable on wall/cover shed/existing tray with MS clamp as per technical specification.
1200
104
124800
Supply of XLPE insulated PVC sheathed armoured underground cable of 4 core 400 Sq.mm Aluminium Conductor graded 1.1KV for working voltage up to 1100 volts conforming to IS 7098 with latest amendment with making end termination with brass compression gland and lug as required.
500
3403
1701500
Supply of XLPE insulated PVC sheathed armoured underground cable of 4 core 240 Sq.mm Aluminium Conductor graded 1.1KV for working voltage up to 1100 volts conforming to IS 7098 with latest amendment with making end termination with brass compression gland and lug as required
1500
2176
3264000
Supply of XLPE insulated PVC sheathed armoured underground cable of 4 core 120 Sq.mm Aluminium Conductor graded 1.1KV for working voltage up to 1100 volts conforming to IS 7098 with latest amendment with making end termination with brass compression gland and lug as required.
1000
1142
1142000
Supply of XLPE insulated PVC sheathed armoured underground cable of 4 core 70 Sq.mm Aluminium Conductor graded 1.1KV for working voltage up to 1100 volts conforming to IS 7098 with latest amendment with making end termination with brass compression gland and lug as required.
1000
736
736000
Supply of XLPE insulated PVC sheathed armoured underground cable of 4 core 25 Sq.mm Aluminium Conductor graded 1.1KV for working voltage up to 1100 volts conforming to IS 7098 with latest amendment with making end termination with brass compression gland and lug as required
1500
322
483000
Supply, erection, testing & commissioning of recessed mount2'X2'LED36 W Light fitting .Bajaj make. Model - Dominto Led(BCTBLR 36 W LED FP CW)or equivalent
50
4600
230000
Supply, erection, testing & commissioning of 5 star, 1.5 Ton Split Inverter A.C. (Voltas model no. 185V MZM or equivalent) with iron stand and 5 KVA voltage stabilizer (voltage range 150V to 285V). Make of A.C. & voltage stabilizer shall be as per T.S.
2
52640
105280
Supply, erection, Testing & Commissioning of TPN Industrial type socket 30 A, 415 V, outlet, with 4 pole and earth, metal enclosed plug top along with 30 A "C" curve, TPMCB, in sheet steel enclosure, onSurface or in recess, with chained metal cover for the socket outlet
50
3048
152400
Supply, Installation (with foundation / support structure), Testing & Commissioning of TPN Distribution Board Metal Door with Incomer MCB TPN 63 Amp,1No, ELCB 63 Amp-1 no. and Outgoing MCB DP 16/32 Amp-8 Nos.
15
15072
226080
Supply, erection (support structure), testing and commissioning of following way, single pole and neutral, sheet steel, 8 wayDouble door MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).
2
1760
3520
Supply, erection (support structure) ,testing and commissioning of vertical type three pole and 1 neutral, sheet steel 4 way (4+12) Double door, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).
2
3068
6136
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.a)Single pole
-
199
7164
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. b)Double pole
-
556
1112
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. c)Triple pole and neutral
-
1092
2184
Supply, erection (With support structure/ foundation) and connecting and commissioning of DB with industrial type plug socket 5 pin 3 pole plug of 63 A capacity of (three phase + neutral + earth) and 63A capacity TP MCB of including all other connected accessories
30
12735
382050
Supply, erection (With support structure/ foundation) and connecting and commissioning of DB with industrial plug socket 3 pin 2 pole plug of 20 A capacity of (single phase + neutral +earth) 240V and 20 A MCB including all other connected accessories
30
1232
36960
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.a)2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
-
229
68700
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.b)2 X 4 sq. mm + 1 X 4 sq. mm earth wire
-
263
52600
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.c)2 X 6 sq. mm + 1 X 6 sq. mm earth wire
200
356
71200
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. d)4x4 sq. mm + 2 X 4 sq. mm earth wire
-
670
67000
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.a)4x6 sq. mm + 2 X 6 sq. mm earth wire
100
394
39400
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.b)4x4 sq. mm + 2 X 4 sq. mm earth wire
100
308
30800
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.a)5/6 A switch
20
85
1700
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.b)3 pin 5/6 A socket outlet
20
111
2220
Supplying and drawing of FRLS PVC INSULATED 2 core x 6 sq.mm copper conductor, single core cable in surface/ recessed steel /PVC conduit .
200
122
24400
Supply, erection (with foundation), testing & commissioning of 25 Mtr. Long High Mast Complete 1 with LED light 1x200-10nos., Control Panel, aviation Twin dome 1x9W- 2 nos. LED light, Foundation, LT cable 3.5x25 Sq mm, MS fencing grill etc. of Rly's approved make & specification. Light fittings shall be similar to Crompton MODEL -PLUTO NEO LFLN-200-CDL@47<45@HPM Or equivalent Make of Bajaj, Philips and Crompton
2
712631
1425262
Supply, erection (with foundation), testing & commissioning of 10Mtr. Long High Mast Complete 1 with LED light 1x120 watt -4nos.Control Panel with Distribution Box and MCB. Power cable, wiring, Earthing Rod, MS fencing grill, etc. Tubular steel poles shall be conforming to IS 2713/80(Part-1& 2) with amdt No-1 latest. Light fittings shall be similar to Crompton Model-PLUTO NEO cat LFLN-120-WW@47<45@M.Or equivalent make of - Philips, ,BAJAJ,CROMPTON
2
180000
360000
Supply, erection of 25 mm dia. ISI marked, PVC conduit along with the accessories such as suitable clamps nut bolts, junction box etc
200
14
2800
Supply, erection (with foundation/support structure), testing and commissioning of weather proof 1 feeder pillar ( LT panel board outdoor type floor mounted ) 14 SWG CRCA sheet with powder coated painting and IP-55 class of insulation having hinged door and locking arrangement rubber gasket, extensible from both sides, with Copper bus bar, consisting of Incomer- 400 AMP MCCB 4POLE-1 No, Outgoings- 200 A MCCB 4 pole -2No, , 100 amps 4 pole mccb-5 No,63 AMP-4 No 4 pole MCB, 32 AMP-4 No 4 pole MCB
1
394051
394051
Supply, erection (with foundation) of heavy gauge galvanized steel tubular pole of 9 m long as per 1 410 SP 30, bottom size 139.7 mm dia and 5.40 mm thick, middle 114.3 mm dia & 4.5 mm thick, top 88.9 mm dia & 3.25 mm thick with inbuilt junction box on the bottom section of the pole with required loop box and all accessories including MCB.
50
15962
798100
Supply and Erection of Steel Tubular Pole Arm one way for one nos. light fitting.
50
2128
106400
Supply, erection, testing & commissioning LED street light luminaries of 60W Street light Make- Bajaj Model- Edge next(ENXT P 60L WW CR PC SD) or equivalent make of Philips &Crompton complete with all
50
6500
325000
Supply, erection, testing & commissioning of industrial bulk head luminaire of 10 W LED M/s. Havells model No. LHEOAOP7UZ6W010 lamp of 6000K with all other connected accessories etc. or equivalent model of approved list.
4
2205
8820
Supply, erection, testing & commissioning of AC Exhaust fan 600 mm sweep, 900 RPM suitable to 1 work on 230/250V, 50 HZ .Similar to Crompton greaves Make model No -EXHD600-6-1 complete with mounting frame and louvers including suitable size of hole for fixing of exhaust fan connection complete as required or Equivalent Make of - Usha, Bajaj
30
8998
269940
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall a)25 mm
200
165
33000
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall b)32 mm
200
203
40600
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall c)40 mm
50
292
14600
Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground including excavations, sand cushioning protective covering and refilling the trench etc. as required.a)up to 35 Sq. mm
100
323
32300
Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground including excavations, sand cushioning protective covering and refilling the trench etc. as required. c)Above 95 Sq. mm and up to 185 Sq. mm
700
352
246400
Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground including excavations, sand cushioning protective covering and refilling the trench etc. as required. d)Above 185 Sq. mm and up to 400 Sq. mm
1200
396
475200
Laying of one number additional PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground including excavations, sand cushioning protective covering and refilling the trench etc. as required.a)up to 35 Sq. mm
50
222
11100
Laying of one number additional PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground including excavations, sand cushioning protective covering and refilling the trench etc. as required. b)Above 35 Sq. mm and up to 95 Sq. mm
250
236
59000
Laying of one number additional PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground including excavations, sand cushioning protective covering and refilling the trench etc. as required. c)Above 95 Sq. mm and up to 185 Sq. mm
250
251
62750
Laying of one number additional PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground including excavations, sand cushioning protective covering and refilling the trench etc. as required. d)Above 185 Sq. mm and up to 400 Sq. mm
700
294
205800
Supply & Fixing of 9W LED bulb with holder and other fittings. The fixture shall be Crompton model no. LED9DFCDL-PRO-BO or equivalent.
20
120
2400
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of 120 sq. mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
300
438
131400
Supply, erection, testing & commissioning of high bay light 80W LED luminaire of Make-Havells Model-ILIOSBAY PLUS HIGHBAY or equivalent, lamp with all other connected accessories etc. or equivalent model. Make- Philips, Bajaj
40
9400
376000
Supply, erection, testing and commissioning of LED Tube Light, 2X18 W, T5 fitting complete with lamp and accessories. havells Model no. REGALBATTENT8UPT02x22WDSBSWH for batten and TITANIANE01213TBSSTL18WLED865SPC for tube light or similar. Make shall be as per T.S
10
2285
22850
Design Engineering, Supply, Installation, testing & Commissioning of Solar Light Pipes of 750 mm Dia. with all accessories for lighting as per tender specification.
40
46286
1851440
Laying of one number additional PVC insulated sheathed / XLPE power cable of 11 KV grade of 120 sq.mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
150
300
45000
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall d)50 mm
50
368
18400
Safety Wire for Motor Coach/Grouter system
410
20000
8200000
Procure, install, commission and proving out of 5Ton EOT crane, as per enclosed specification no. WP/Mech/PRTN/M&P/EOT(5T)
2
3545000
7090000
Procure, install, commission and proving out of 10/3 Ton EOT crane, as per enclosed specification no. WP/Mech/PRTN/M&P/ EOT(10/3T)
2
4245000
8490000
Procure, install, commission and proving out of : 3(a)40/10 Ton EOT crane with 119 mtrs DSL as per enclosed specification no. WP/Mech/PRTN/M&P/ EOT(40/10T)
-
8955500
17911000
Procure, install, commission and proving out of : 3(b)40/10 Ton EOT crane with 49 mtrs DSL as per enclosed specification no. WP/Mech/PRTN/M&P/ EOT(40/10T)
-
8850500
17701000
Procure, install, commission and proving out of Double Column Guillotine Shearing Machine (10x3100mm) as per enclosed specification no. WP/Mech/PRTN/M&P/ DCGSM(10x3100)
1
2501631
2501631
Procure, commission and proving out of 10 Tonne Diesel Truck as per enclosed specification no. WP/Mech/PRTN/M&P/ Truck(10T)
2
1937150
3874300
Procure, install, commission and proving out of Hand Pallet truck Capacity 2.5Ton as per enclosed specification no. WP/Mech/PRTN/M&P/HPT(2.5T)
4
24500
98000
Procure, install, commission and proving out of Huck Bolting Machine as per enclosed specification no. WP/Mech/PRTN/M&P/HBM
1
1455589
1455589
Procure, install, commission and proving out of Console Testing Machine as per enclosed specification no. WP/Mech/PRTN/M&P/CTM
1
3717000
3717000
Procure, install, commission and proving out of Universal Multipurpose Armature Lathe Machine as per enclosed specification no. WP/Mech/PRTN/M&P/UMALM
1
9202095
9202095
Procure, install, commission and proving out of Inverter Welding Machine Portable type Inverter based (IGBT)- 400 Amps as per enclosed specification no. WP/Mech/PRTN/M&P/IGBT
11
53463
588093
Procure, install, commission and proving out of Bearing Induction Heater-40KVA as per enclosed specification no. WP/Mech/PRTN/M&P/BIH-40KVA
2
454300
908600
Procure, install, commission and proving out of Traction Motor Rectifier as per enclosed specification no. WP/Mech/PRTN/M&P/TMR
1
483210
483210
Procure, install, commission and proving out of Transformer Oil Centrifusing System 2000LPH as per enclosed specification no. WP/Mech/PRTN/M&P/TOCS
2
664460
1328920
Procure, install, commission and proving out of Static Weighbridge-50T as per enclosed specification no. WP/Mech/PRTN/M&P/SW (50T)
1
1600000
1600000
Procure, install, commission and proving out of VVVF Drive Traction Motor testing system as per enclosed specification no. WP/Mech/PRTN/M&P/ VDTM
1
1599549
1599549
Procure, install, commission and proving out of Tools and Plant as per enclosed specification no. WP/Mech/PRTN/M&P/ T&P
1
1141717
1141717
Procure, install, commission and proving out of Software and Hardware as per enclosed specification no. WP/Mech/PRTN/M&P/ S&H
1
1177220
1177220
Procure, install, commission and proving out of Trolleys as per enclosed specification no. WP/Mech/PRTN/M&P/Trolley
1
813560
813560
Procure, install, commission and proving out of Utility Vehicle as per enclosed specification no. WP/Mech/PRTN/M&P/ UV
1
2413087
2413087
Procure, install, commission and proving out of Tractor as per enclosed specification no. WP/Mech/PRTN/M&P/ Tractor
1
850000
850000
Procure, install, commission and proving out of Industrial Steel Lockers as per enclosed specification no. WP/Mech/PRTN/M&P/ ISL
15
5327
79915.5
Procure, install, commission and proving out of Optimizer/ Mobile Storage System as per enclosed specification no. WP/Mech/PRTN/ M&P/ OSS
1
768865
768865
Procure, install, commission and proving out of MIG/MAG Synergic Pulse Welding Plant as per enclosed specification no. WP/Mech/PRTN/ M&P/ MIG-MAG(400 A)
3
440000
1320000
Procure, install, commission and proving out of . 25 (a)Trestle for Motor Coach as per enclosed specification no. WP/Mech/PRTN/M&P/Trestle
-
19018
304288
Procure, install, commission and proving out of . 25(b)Trestle for Trailer Coach as per enclosed specification no. WP/Mech/PRTN/M&P/Trestle
-
15986
767328
Procure, install, commission and proving out of Electric Baking Oven (100 KW) as per enclosed specification no. WP/Mech/PRTN/M&P/EBO (100 KW)
1
1288560
1288560
Procure, install, commission and proving out of Pallet Racks as per enclosed specification no. WP/Mech/PRTN/M&P/PR
2
550994
1101988
Procure, install, commission and proving out of Metal pallet as per enclosed specification no. WP/Mech/PRTN/M&P/MP . 28(a)Cage Pallet
-
16756
2379352
Procure, install, commission and proving out of Metal pallet as per enclosed specification no. WP/Mech/PRTN/M&P/MP . 28(b)Flat Pallet
-
8230
971140
Procure, install, commission and proving out of Battery Operated Rail cum Road shunting vehicle as per specification no. WP/Mech/PRTN/M&P/ RRSV
1
8181549
8181549.6
Procure, install, commission and proving out of Electrolyte Neutralization Plant for Battery Acid as per specification No. WP/Mech/PRTN/M&P/ENPB
1
220660
220660
Procure, install, commission and proving out of compressed air pipe line with valves, clamps and 01 other fittings as per specification no. WP/Mech/PRTN/M&P/CAP . 31(a)Supply, Installation & Commissioning of 80 NB GI Pipe (IS:1239, Part-I) Heavy class (C class) including cutting, threading, welding etc. bends, elbow, reducers, nut bolts, washers, with one coat of primer and two coats of synthetic enamel paint of approved make and shade.
-
3168
1108800
Procure, install, commission and proving out of compressed air pipe line with valves, clamps and 01 other fittings as per specification no. WP/Mech/PRTN/M&P/CAP . 31(b)Supply, Installation & Commissioning of 25 NB GI Pipe (IS:1239, Part-I) Heavy class (C class) including cutting, threading, welding etc. bends, elbow, reducers, nut bolts, washers, with one coat of primer and two coats of synthetic enamel paint of approved make and shade.
-
1258
115736
Procure, install, commission and proving out of compressed air pipe line with valves, clamps and other fittings as per specification no. WP/Mech/PRTN/M&P/CAP . 31(c)Supply, Installation & Commissioning of CI Ball Valve suitable for 15 Kg/sq cm, complete in all respect, 80 mm dia nominal bore.
-
11770
58850
Procure, install, commission and proving out of compressed air pipe line with valves, clamps and 01 other fittings as per specification no. WP/Mech/PRTN/M&P/CAP . 31(d)Supply, Installation & Commissioning of Forged Brass Ball valve with hard chrome plated ball valve suitable for 15 Kg/sq.cm, complete in all respects, 25 mm dia nominal bore.
-
3960
79200
Procure, install, commission and proving out of compressed air pipe line with valves, clamps and other fittings as per specification no. WP/Mech/PRTN/M&P/CAP . 31(e)Supply, Installation & Commissioning of Support Clamp 80mm.
-
643
27027
Procure, install, commission and proving out of compressed air pipe line with valves, clamps and other fittings as per specification no. WP/Mech/PRTN/M&P/CAP . 31(f)Supply, Installation & Commissioning of Support Clamp 25mm.
-
247
29700
Procure, install, commission and proving out of compressed air pipe line with valves, clamps and other fittings as per specification no. WP/Mech/PRTN/M&P/CAP . 31(g)Supply, Installation & Commissioning of TEE Bolt M8 X 50mm
-
38
6468
Procure, install, commission and proving out of compressed air pipe line with valves, clamps and other fittings as per specification no. WP/Mech/PRTN/M&P/CAP . 31(h)Supply, Installation & Commissioning of Mounting Bracket 300mm.
-
456
19173
Procure, install, commission and proving out of compressed air pipe line with valves, clamps and other fittings as per specification no. WP/Mech/PRTN/M&P/CAP . 31(i)Supply, Installation & Commissioning of Branching Reducer 80mm X 25 mm
-
2750
55000
Procure, install, commission and proving out of Miscellaneous Appliances as per specification no. WP/Mech/PRTN/M&P/Misc Appl . 32(a)Supply, Installation & Commissioning of 100 L Direct cool single door refrigerator
-
11985
23970
Procure, install, commission and proving out of Miscellaneous Appliances as per specification no. WP/Mech/PRTN/M&P/Misc Appl . 32(b)Supply, Installation & Commissioning of 300 L, frost free double door Refrigerator
-
39100
39100
Procure, install, commission and proving out of Miscellaneous Appliances as per specification no. WP/Mech/PRTN/M&P/Misc Appl . 32(c)Supply, Installation & Commissioning of LED TV 40 inch
-
33700
33700
Procure, install, commission and proving out of Miscellaneous Appliances as per specification no. WP/Mech/PRTN/M&P/Misc Appl . 32(d)Supply, Installation & Commissioning of 2 ton high wall split Air conditioner (hot & cold)
-
42200
42200
Procure, install, commission and proving out of Miscellaneous Appliances as per specification no. WP/Mech/PRTN/M&P/Misc Appl . 32(e)Supply, Installation & Commissioning of Automatic washing machine (washer with dryer/extractor top load)
-
22795
22795
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(a)Supply, Installation & Commissioning of Steel Almirah Plain with 4 shelves
-
18921
113526
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33 (b)Supply, Installation & Commissioning of three seater Sofa set with centre table
-
32203
128812
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(c)Supply, Installation & Commissioning of Sofa set three seater with 2 nos. single seater and 1 no. of centre table
-
49698
99396
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(d)Supply, Installation & Commissioning of visitor chair with armrest
-
7959
87549
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(e)Supply, Installation & Commissioning of visitor chair
-
5900
177000
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(f)Supply, Installation & Commissioning of visitor chair without arms
-
3400
340000
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(g)Supply, Installation & Commissioning of Executive table Main desk with extended return unit
-
40402
40402
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(h)Supply, Installation & Commissioning of Revolving chair
-
8700
435000
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(i)Supply, Installation & Commissioning of set of king size double bed complete with side stool both side in solid wood/solid plywood
-
46802
93604
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(j)Supply, Installation & Commissioning of study table with executive revolving chair
-
25511
25511
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(k)Supply, Installation & Commissioning of study table with revolving chair
-
18641
18641
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(l)Supply, Installation & Commissioning of Dressing table with one no. stool
-
19424
38848
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(m)Supply, Installation & Commissioning of four seater Dining table set with 4 dining chair
-
39691
39691
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(n)Supply, Installation & Commissioning of Executive table Main desk plus extended return unit
-
47755
47755
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(o)Supply, Installation & Commissioning of Computer table with computer chair
-
20620
41240
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(p)Supply, Installation & Commissioning of Steel Almirah plain with 4 shelves
-
14285
214275
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(q)Supply, Installation & Commissioning of Book case four doors
-
23759
23759
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(r)Supply, Installation & Commissioning of office table (one side storage)
-
11150
334500
Procure, install, commission and proving out of Furniture items as per specification no. 01 WP/Mech/PRTN/M&P/Furniture . 33(s)Supply, Installation & Commissioning of Executive chair high back
-
16390
16390
Procure, install, commission and proving out of Furniture items as per specification no. WP/Mech/PRTN/M&P/Furniture . 33(t)Supply, Installation & Commissioning of eight seater Dining table set solid wood with 8 dining chair
-
56206
56206
Procure, install, commission and proving out of Kitchen items as per specification no. WP/Mech/PRTN/M&P/Kitchen Items .@10"40@a)Supply, Installation & Commissioning of Kitchen Chimney
-
18000
18000
Procure, install, commission and proving out of Kitchen items as per specification no. WP/Mech/PRTN/M&P/Kitchen Items . 34 (b)Supply, Installation & Commissioning of Microwave Oven
-
13450
13450
Procure, install, commission and proving out of Kitchen items as per specification no. WP/Mech/PRTN/M&P/Kitchen Items .@10"40@c)Supply, Installation & Commissioning of Dinner set
-
4249
8498
Supply, Installation & Commissioning of complete kitchen set stainless steel .@10"40@d) (i) Supply, Installation & Commissioning of Pressure cooker (Cap-10 Litres)
-
1
2560
Supply, Installation & Commissioning of complete kitchen set stainless steel .@10"40@d) (ii)Supply, Installation & Commissioning of Pressure cooker (cap-5 Ltrs.)
-
1
1690
Supply, Installation & Commissioning of complete kitchen set stainless steel .@10"40@d) (iii)Supply, Installation & Commissioning of Aluminium Kadhai 15 litres
-
1
2200
Supply, Installation & Commissioning of complete kitchen set stainless steel .@10"40@d) (iv)Supply, Installation & Commissioning of Aluminium Kadhai 5.5 litres
-
1
1580
Supply, Installation & Commissioning of complete kitchen set stainless steel .@10"40@d) (v)Supply, Installation & Commissioning of Tawa curved round with handle
-
1
950
Supply, Installation & Commissioning of complete kitchen set stainless steel .@10"40@d) (vi)Supply, Installation & Commissioning of 155 mm Domestic Fry Pan
-
1
495
Supply, Installation & Commissioning of complete kitchen set stainless steel .@10"40@d) (vii)Supply, Installation & Commissioning of Heavy duty Mixer Grinder
-
1
6000
Supply, Installation & Commissioning of complete kitchen set stainless steel .@10"40@d) (viii)Supply, Installation & Commissioning of Double burner Gas Stove
-
1
8645
Procure, install, commission and proving out of All in one COMPUTER, UPS, Multifunctional Printer & Colour multifunction Laser printer with scanner as per specification no. WP/Mech/PRTN/M&P/AIO/P&UPS . 35(a)Supply, Installation & Commissioning of All in One computer
-
49999
1499970
Procure, install, commission and proving out of All in one COMPUTER, UPS, Multifunctional Printer & Colour multifunction Laser printer with scanner as per specification no. WP/Mech/PRTN/M&P/AIO/P&UPS . 35 (b)Supply, Installation & Commissioning of UPS
-
2799
83970
Procure, install, commission and proving out of All in one COMPUTER, UPS, Multifunctional Printer & Colour multifunction Laser printer with scanner as per specification no. WP/Mech/PRTN/M&P/AIO/P&UPS . 35(c)Supply, Installation & Commissioning of Laserjet Multi-Function Printer
-
20500
307500
Procure, install, commission and proving out of All in one COMPUTER, UPS, Multifunctional Printer 01 & Colour multifunction Laser printer with scanner as per specification no. WP/Mech/PRTN/M&P/AIO/P&UPS . 35(d)Supply, Installation & Commissioning of Colour Multi functional Laser Printer with scanner and automatic feeder
-
124700
249400
Transportation and Restoration/ Renovation of Rolling Stock for displaying as Indian Railway Heritage at Premises of Pratapnagar Workshop . 36(b)Transportation Charges for extra per Km rate beyond 63 Km including cost of fuel, lubricant etc. as per enclosed terms and conditions
-
252
201600
Transportation and Restoration/ Renovation of Rolling Stock for displaying as Indian Railway Heritage at Premises of Pratapnagar Workshop . 36(c)Restoration/Renovation of Locomotive/Coach for displaying as Indian Railway Heritage
-
1462020
1462020
Supply and installation of Industrial casing caping of 30 mmx25 mm of 1 mtr lenghth. Refer Technical specification. Inspection : Consignee
800
54
43344
Supply of 10 pair twisted conductor PVC Indoor cable (0.5 mm) dia annealed copper confirming to as per TEC spec no GR WIR 06/03 March 02 or latest. Refer Technical specification. Inspection : Consignee. (Unit Meter Read as R Meter)
1000
36
36710
Supply of STP CAT-6 cable, 1 Box=305 mtr DAX, Nortal, Amp, Molex or Lucent make with identification mark/ ferrules. Refer Technical specification. Inspection : Consignee
2440
28
70272
Supply and installation of " Wago" make TOPJOB S, 2-conductor through terminal block; with one 01 side lever and push-button operated on other side; cross section of 2.5 mm2 ; with test port; side and center marking ; for DIN-rail 35 x 15 and 35 x 7.5 ; push-in CAGE CLAMP; colour : gray; dimensions of 5.2 mm (W) x 32.9 mm (H) from upper edge of Din 35 and 61.5 mm (D). Refer Technical specification. Inspection : Consignee
1500
114
171690
Supply and installation of " Wago" make End and intermediate plate for lever type terminals; 0.8 mm thick; gray; dimension 0.8 (W) x 33 mm (H) x 72.2 mm (D).Refer Technical specification. Inspection : Consignee
150
60
9027
Supply and installation of " Wago" make Screw less end stop; 6 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray; dimension of 6 mm (W) 28.2 mm (H) x 45 mm (D).Refer Technical specification. Inspection : Consignee
150
8
1327.5
Supply and installation of " Wago" make Marker 1-10 (10 timme in one strip).Refer Technical specification. Inspection : Consignee
1500
53
80265
Supply and installation of " Wago" Marker 11-20 (10 timme in one strip).Refer Technical specification. Inspection : Consignee
1500
53
80265
Supply and installation of "Eldon" make M.S Wall mounting panel enclosure with color RL 7035 with Din rail (Size 300H x 200W x 120D).Refer Technical specification. Inspection : Consignee
8
2324
18596.8
Supply and installation of "Eldon" make M.S Wall mounting panel enclosure with color RL 7035 with Din rail (Size 300H x 200W x 155D).Refer Technical specification. Inspection : Consignee
30
2773
83190
Supply and installation of Rigid uPVC Conduits having Outer dia. 25 mm and inner dia 21.40 mm Thickness 1.6 mm with ISI Mark (IS:9537 Part-3 or latest) .Refer Technical specification. Inspection : Consignee
1500
14
21600
Laying & drawing of data communication cable/CAT-6 & power cable, OFC in casing & capping / Rigid U pvc conduit through wall / structure of platform shed/ underground through GI/DWC/HDPE pipe. Refer Technical specification. Inspection : Consignee
2100
25
52920
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements