Western Railway Tender

Supply and Fixing Roller blind as per sample available at SSE(W) includingallcontractor's labour, tools and plants,etc., all leads, lifts, transport, taxes etc., complete

Supply of material and providing main/ submain concealed wiring, with single core multi-strand copper wire, PVC insulated unsheathed, LSHF / ZHFR, of size 2.5 sq.mm. for phase, neutral & earth wire, as per specifications in Annexure II.

Providing and Fixing Spray hose chromium plated of jacquar make code No. 563 /MarcSeriseNo. MAC-3050 or similar as approved by engineer in charge with all contractor's material, labour,tools & plantsetc. complete with all lead & lift

Supply of energy efficient inverter cassette air conditioning unit, 2 Ton capacity with an ISEER value of 4.35 or more, with copper condenser, complete with all accesssories, as per specifications in Annexure XIII.

Supply and fixing of bracket type ready made M.S. stand for outdoor units of split Air conditioners, as per specifications in Annexure XV.

Supply, fixing, testing & commissioning of energy efficient BEE 5 star rated BLDC ceiling fan 1200mm (48") sweep with down rod, modular electronic regulator and standard accessories, as per specifications in Annexure VIII. (Minimum Warrantee - 2 years)

Supply and Laying 8mm thick laminated wood pattern plank floor with tounge and 15 groove arrangement of approved shed and quality similar to 'Pergo'family brand or similar,complete in all respect with all contractors materials, labour leads, lifts, wastages including levellingof existing surface POP wherever required

Providing and Fixing Pillar Cock chromium plated (mixer) for wash basin jacquar makecode No-167/Marc series NO. MOR1100 or similar as approved by engineer incharge with all contractor'smaterial, labour, tools & plants etc. complete with all lead & lift

Supply and fixing of modular concealed mounting box of four module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III.

Installation, testing & commissioning of split AC units of capacity 1.0TR/1.5 TR/2TR at the nominated site, as per specifications in Annexure XVI.

Supply, fixing, testing and commissioning of 125A, 4 pole electronic / microprocessor 16 based MCCB, with inbuilt earth fault protection along with earth leakage protection having shunt coil, earth leakage relay 30mA -30A CBCT etc., in sheet steel enclosure, as per specifications in Annexure XI.

Supply and fixing of modular concealed mounting box of eight module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III.

Supply, fixing, testing and commissioning of Auto Transfer Switch 4 pole, 3 phase, 160A capacity panel mounted type, complete with all accessories as per specifications in Annexure X.

Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi-stranded copper conductor cable of size 16 mm2 x 4 core, as per specifications in Annexure XII.

- Providing and Fixing Two way bib cock chromium plated (toilet bib) of jacquar makecode No- 041/Marc Series No- MOR1380 or similar as approved by engineer in charge with all contractor'smaterial, labour, tools & plants etc. complete with all lead & lift

Supplying and fixing counters/cupboards made of marine ply of kit ply gold orGujranplyorsimilarconforming to IS 710 as per following description.The top shall be supported byverticalsupportsof marine ply and fixed towallwithout any gap.Drawers with wooden knobs, lockingarrangementsandsliding arrangements consisting of PVC slidingrollers onaluminium angles 5 shall be providedasperapproved drawings.Shelves as per approved drawings below the workingplatformwith horizontalandverticaldividers, shutters of marine ply with brass hinges, wooden knobs andlockingarrangementswithbrass locksshall be provided.Cost of providing veneer, polishing and CT woodworkinvolved will be paidseparately.Paymentwillbe made for actual area of marine ply and used in the workasper following itemsand no extra payment will be made forfittings,sliding arrangements etc.(a)19 mm marine ply conforming to IS 710

Supply, fixing, testing & commissioning of MCB DB three phase with RCCB, in m.s. enclosure, out door type, I/C- FP MCB of 63A - 1No. & FP RCCB of 63Amp - 1No and O/G: SP MCB of 10-32 Amp - 12Nos, as per specifications in Annexure VII.

Supply of suspended / surface mounted, high on aesthetics and performance having housing with micro-texture powder coating LED luminaire 18W, System efficacy greater than or equal 13 to 100 lm/W, surface/ suspended mounting type as per site requirement, PMMA/ acrylic diffuser, aesthetically integrated suspension and power cable in suspended version, complete with all accessories. Luminaire as per Wipro make Cat no - LD99-281-XXX57SMWH or similar and as per sample approved.

Supply, fixing, testing & commissioning of indoor type LED luminaires 40W maximum, 14 2'x2' size, recess mounting type, having inbuilt occupancy sensor, System efficacy greater than or equal to 100 lm/W, Luminaires must be capable of delivering minimum 3500 lumens, luminaires complete with all accessories and other specifications as per Annexure IX. (Minimum Warrantee - 5 years)

Supply and fixing of modular concealed mounting box of six module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III.

Supply, fixing, testing & commissioning of MCB DB single phase with RCCB in m.s. enclosure, I/C-DP MCB of 40A - 1No. & DP RCCB of 40A - 1No., O/G: SP MCB of 6A-32A - 8Nos., as per specifications in Annexure VI.

Supply and fixing of modular concealed mounting box of twelve module, with suitable 7 modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III.

Supply and fixing of plumber grade CPVC pipe line of nominal bore size 25 mm / 40 mm, as per site requirement, with all accessories, to drain out the condensate water - as per Annexure XVIII.

Construction of 200 mm thick load bearing walls with siporex precast blocks of size 11 200mm X 240mm X 600mm in 1:6 Cement sand mortar. The rate is inclusive of all contractors labour, tools and plants, leads, lifts, taxes etc., complete. Only cement for the work shall be paid free of cost. Sample of siporex block shall be got approved from the engineer in-charge of the work

Supply, fixing, testing and commissioning of 250A, 4 pole electronic / microprocessor 17 based MCCB, with inbuilt earth fault protection along with earth leakage protection having shunt coil, earth leakage relay 30mA -30A CBCT etc., in sheet steel enclosure, as per specifications in Annexure XI.

Supply and Fixing 9 mm thick ply of good quality over existing wall/partition 4 /frameswithcontractor materials i.e nail ,screw ,adhesive, beading and filling a joint with matching materialas per theinstruction of Railway engineer in charge (frame work paid separately).The rate isinclusive of all materials ,T&P,Leads & Lifts , transportation taxes etc. complete

Providing cutting & fixing SHEET GLASS PANES 10mm THICK in counters to existingframe work with rubber gaskets & anodized aluminium square/sloped beadings or with 7 wooden beadings ofapproved size & quality so as to make the panels water tight with all necessary screws and otheraccessories required for the work with all labour, materials, tools & plants, consumables etc.. complete.Frame work will be paid separately. The rate shall also include cost of making semi-circular hole for counterat counter level and circular hole on top for speaking to booking clerk including rounding off the edges etc.complete.

Supply and fixing of refrigerant copper tubing with insulation of required size, copper pipe dia 5/8" or 3/8" or 1/2" as per site requirement, complete with hardware fittings, as per specifications in Annexure XIV.

Supplying and fixing counters/cupboards made of marine ply of kit ply gold orGujranplyorsimilarconforming to IS 710 as per following description.The top shall be supported byverticalsupportsof marine ply and fixed towallwithout any gap.Drawers with wooden knobs, lockingarrangementsandsliding arrangements consisting of PVC slidingrollers onaluminium angles 6 shall be providedasperapproved drawings.Shelves as per approved drawings below the workingplatformwith horizontalandverticaldividers, shutters of marine ply with brass hinges, wooden knobs andlockingarrangementswithbrass locksshall be provided.Cost of providing veneer, polishing and CT woodworkinvolved will be paidseparately.Paymentwillbe made for actual area of marine ply and used in the workasper following itemsand no extra payment will be made forfittings,sliding arrangements etc.(a)12 mm marine ply conforming to IS 710

Supply and fixing 2'' (Inches) Heavy Duty PVC Pressure pipe Kishan or similar make including fittings and fixing material . Material will be approved by Engineer in charge The Rate includes all labour ,material , T&P , taxes etc. complete

Supplying and fixing 5mm mirror with design hatching line all round edgewith 12 aluminum anodised frame,powder quoted with copper colour or any other colour as directed byRly.Engineer.Aluminum frame shall be 40mm thick with hard board packing behind the mirror and providedwith hanging arrangements. The quality of mirror shall be confirm to Modigaurd or similar

Supply of material and providing main/ submain concealed wiring, with single core multi-strand copper wire, PVC insulated unsheathed, LSHF / ZHFR, of size 4.0 sq.mm. for phase, neutral & earth wire, as per specifications in Annexure II.

Supply of material and providing light/fan point concealed wiring, with single core 1 multi-strand copper wire, PVC insulated unsheathed, LSHF / ZHFR, of size 1.5 sq.mm. for phase, neutral & earth wire and modular switches, complete with all accessories, junction box, ceiling rose etc, as per specifications in Annexure I.

- Supply and fixing PTMT Nahani Trap Prayag or Similar make. Colour will be appprovedby Engineerincharge. The Rate includes all labour, material , T & P, taxes etc complete

Supplying & fixing WASH BASIN TABLE TOP ADMIRAL COLLECTION of BELL CERAMIC of 8 size 570mm x 425mm x 175mm or similar of approved quality & colour with CP brass vest coupling, PVC connection,etc with complete fittings. The rate shall include cost of all materials, labour, tools & plants and with all lead, lift, transportation, taxes etc.. complete

Supply, fixing, testing & commissioning of modular power socket 3 pin twin heavy duty of 6/16A or 10/20 A capacity with 20A one way modular switch with neon indicator, as per specifications in Annexure V.

Providing and applying 8 to 15mm thick water resistance premixed/ready mixed Roofit Mix internal plaster of thick render's of Roofit Industries Ltd. or similar. The specifications of the premixed internal plaster shall be as under. 1.Colour- Gray 2. Binder- Ordinary Portland Cement. 3.Filler- Graded sand conforming to BS 1199. 4.Additives- Water-soluble additives to improve workability, water retention, durability and adhesion strength 5.Water Demand : For hand application: Approx.14-16% or 7-8 L/50 kg bag 6.Max. aggregate- Size 2.60mm 7.Pot lift- Approx. One hour. 2 8.Consumption- 2.30kg per sqm per mm thickness. 9.Practical Consumption: Approx. 23.0 Kg/m2 /mm for thickness 10mm 10.Water demand- For hand application: Approx.14-16% or 7-8 L/50 kg bag 11.Adhesion to concrete : >0.75N /mm2 (1.0 N/mm2) 12.Compressive strength : > 10 N / mm2 13.Chloride content : <0.01% 14.Date of pack- Not/more than 6 months. NOTE: The ready mix plaster in bags shall be first supplied to the IOW in his godown & then drawn from his godown from time to time. The material should be got approved by the Contractor from the Railway Engineer before use on work. Transportation to site has to be done at contractor's cost and payment will be made for area of work done and not for any bags supplied

Supply and fixing of refrigerant copper tubing with insulation of required size, copper pipe dia 1/4", complete with hardware fittings as per specifications in Annexure XIV.