Maharashtra Jeevan Pradhikaran Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Maharashtra Jeevan Pradhikaran - MJP Tender
Coronavirus COVID 19
Eprocure
Opening Date17 Feb 2020
Closing Date26 Mar 2020
Tender Amount₹ 2,67,59,022
Costs
EMD
₹ 1,50,000Document Cost
₹ 11,200Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_COJAL_551243_1Bid Award Id
ViewTender No
E Tender Notice No.24 For 2019-2020 MJP Div.2Tender Authority
Maharashtra Jeevan Pradhikaran ViewPurchaser Address
-Website
http://https://water.maharashtra.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
DI specials - 80 To 300 Mm dia
150
-
101
... More
Item No -2
-
-
-
... More
Providing and supplying D.I. fittings with ISI mark
Mechanical joint confirming to tables 12 to table 31 of IS
9523/2000 upto latest amendments including cost of SBR/
EDPM gaskets, Nuts, Bolts, Washers and Ductile iron
follower glands. Fittings should be with internally Ordinary
portland cement mortor lined and externally metallic zinc
coating/zinc rich paint with finishing layer of black bitumen
coating including transportation and excluding all statutary
duties and taxes such as GST levied by Gol and GoM in all
respect etc. complete.
-
-
-
... More
200 mm Dia
3
-
5015
... More
Item No :-3
-
-
-
... More
Providing and supplying ISI standard MS
specials of required thickness with 3
coats of approved make epoxy paint
(Shalimar, Ciba or Mahindra & Mahindra
make) from inside and outside excluding
all statutory duties & taxes such as GST
levied by GOI & GOM in all respect,
inspection charges, transportation to
stores / site, and stacking, etc. complete.
-
-
-
... More
M S pecials
100
-
79
... More
All socketed
-
-
-
... More
Item No -4
-
-
-
... More
Providing double flange sluice valve
confirming for IS- 14846 including worn gear
arrangements as per test pressure, stainless
steel spindle, caps, including inspection
charges, transportation upto departmental
store, unloading, stacking excluding GST
levied by GOI & GOM in all respect etc.
complete.
a) Sluice valves - PN -1 (Without by pass)
-
-
-
... More
200 Mm dia CIDF Sluice Valve PN -1
2
-
17365
... More
Item No -5
-
-
-
... More
Excavation for foundation / pipe trenches in
earth, soils of all types, sand, gravel and
soft murum,Hard Murum , boulder soft rock, old cement and lime masonry foundation asphalt road, hard rock and concreat road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, including removing the excavated
material upto a distance of 50 metres and lifts
as below, stacking and spreading as directed,
normal dewatering, preparing the bed for
foundation and excluding backfilling, etc.
complete. (Bd-A-1,2,3,4,5/259)
-
-
-
... More
Lift 0 to 1.50 M
15.12
-
519.68
... More
Item no -6
-
-
-
... More
Filling in plinth and floors / trenches with
contractor's murum for bedding in 15 cm to
20 cm layers including watering and
compaction, etc. complete. (Bd-A-11/263)
2.16
-
76.65
... More
Item no -7
-
-
-
... More
Lowering laying and jointing with SBR ruber gaskets
C.I. S/S pipes of various classes with CI / MS specials of
following diameter in proper position, grade and alignment
as directed by Engineer-in-charge including conveyance of
material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete.
Note : Only SBR Rubber gaskets to be used as per
IS-5382 and IS-12820.
-
-
-
... More
A)200 mm dia. D.I. K-7 pipes (Without rubber ring)
18
-
108.15
... More
Item no -8
-
-
-
... More
Hydraulic testing of C.I./D.I. pipe line to specified
pressure including cost of all materials and
labour and water for testing for specified length
including cutting, placing end cap making arrangement
for filling safe water using reciprocating
type pumps which should be able to provide
specified test pressure gauges and other
necessary equipments, labour, operation
charges, etc. required for testing. The rate under
this item shall also include cost of retesting,
if necessary and reinstating to original position
using water supplied by the contractor.
-
-
-
... More
without Rubber Ring
-
-
-
... More
A)200 mm dia. D.I. K-7 pipes (Without rubber ring)
0.018
-
12071.85
... More
Item no -9
-
-
-
... More
Lowering, laying and jointing in position
following C.I.D/F Reflex valves, Butterfly
valves and Sluice valves including cost of
all labour jointing material, including nut bolts
and giving satisfactory hydraulic testing etc.
complete. (Rate for all class of valves.)
-
-
-
... More
200 Mm dia CIDF Sluice Valve PN -1
2
-
3544.8
... More
Item no -10
-
-
-
... More
Providing and constructing B.B. masonry valve
chamber with 15 cm thick 1:3:6 proportion
PCC bedding, excluding excavation, B.B.
masonry in CM 1:5 proportion precast RCC
frame and cover, etc. complete as directed by
Engineer-in-charge.
chamber with 15 cm thick 1:3:6 proportion
PCC bedding, excluding excavation, B.B.
masonry in CM 1:5 proportion precast RCC
frame and cover, etc. complete as directed by
Engineer-in-charge.
-
-
-
... More
size 90x60
2
-
9851.1
... More
Item no -11
-
-
-
... More
Providing and laying in situ Cement
Concrete M-15 of trap/ granite / quartzite
/ gneiss metal for foundation and
bedding including bailing out water, form
work, compaction, curing, etc. complete.
(Cement 5.90 bags / cum)
Spec. No. - Bd E /1 Page No. 287
-
-
-
... More
P.C.C. M-150 (1:2:4)
2.95
-
5968.2
... More
Item no -12
-
-
-
... More
Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in
15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
9.69
-
76.65
... More
SUB WORK NO-2 Sump Well
-
-
-
... More
Item No 1
-
-
-
... More
GSR Cap 2.0 Lakh lit
-
-
-
... More
Designing (aesthetically), and
constructing RCC ground service
reservoirs / RCC sumps in M-300 mix
of required capacity including excavation
in all types of strata, foundation concrete,
container walls, bottom slab top RCC roof
slab / or dome, 20 mm thick cement
plaster with water proofing compound in
CM 1:3 proportion to inside face of the
container, including epoxy paint from
inside including refilling and disposing of
surplus stuff within lead of 50 M, all
labour and material charges, for laying
and jointing of pipe assembly for inlet,
outlet washout, over flow and bypass
arrangement consisting of C.I. M.S. D/F.
pipes, specials and valves of given
diameters, providing and fixing
accessories such as M.S. ladder inside
and outside, C.I. Manhole frame and
cover, water top slab, B.B. masonry
chamber for all valves, ventilating shafts,
including giving satisfactory hydraulic test
and water tightness test as per IS code
and providing three coats of cement
paints to all exposed surface of structure
including roof surface etc. complete as
per design data, criteria, obligatory
requirements and detailed specifications.
Anti-termite treatment shall be given for
underground portion of the structure.
Notes
1) The design shall be in accordance with
various relevant I.S. specification (I.S.
456/1978, I.S. 875 - 1987, I.S. 3370 -
1965 or revised.)
2) Only M.S. bars grade I conforming to I.S.
432 part-I or high yield strength deformed
bars conforming to I.S. 1786 or I.S. 1139
shall be used. Grade -II M.S. bars shall
not be used.
3) Entire structure shall be in M-300 only.
4) The scope of pipe assembly work shall
be upto 5 metre beyond outside face of
the wall, cost of pipes valves and specials
is not included in the rate but labour cost
for laying and jointing is included.
5) The G.S.R. / Sump above 15 lakh litres
capacity shall be in two compartment.
Sr. Rate (Rs.) 2020-2021
No.
Description
Unit
Rate (Rs.) 2019-2020
SECTION-K :(I) RCC GSR's AND SUMPS (273)
Complete Labour Complete Labour
Sr. Rate (Rs.) 2020-2021
No.
Description
Unit
Rate (Rs.) 2019-2020
6) The Job includes designing the structure
for uplift pressure and dewatering if
required during entire execution and
disposal of surplus excavated stuff within
lead of 50 metres as directed by
Engineer-in-charge. If uplifts considered
in design, then these rates shall be
increased by 7.5%.
7) G.S.R. outlets shall be with bell mouth of
approved pattern in bottom slab and cost
of designing bell mouth is included in the
rate. Sump well includes cost of suction
pit required at bottom.
8) For pipe diameters upto 300 mm only CI
pipes and CI specials shall be used. For
pipe diameters above 300 mm, M.S.
pipes and specials minimum 10 mm thick
shall be used with proper anticorrosive
epoxy treatment from inside and outside.
9) Cost of pump house is not included in
these rates.
10) Above rates are applicable for Seismic
Zones 2, 3 and 4.
11) 75% part rate shall be payable for
reinforcement, concrete and plastering
items of all types of G.S.R.s and sumps
till satisfactory hydraulic testing for water
tightness test is given and till that work
shall be treated as incomplete.
Note : Conditions from Sr. No. 1 to 11
shall form a part and parcel of tender and
must be included in the draft tender
papers for work of R.C.C. GSRs and
sumps.
Rates for RCC GSRs and Sumps
-
-
-
... More
Designing (aesthetically), and
constructing RCC ground service
reservoirs / RCC sumps in M-300 mix
of required capacity including excavation
in all types of strata, foundation concrete,
container walls, bottom slab top RCC roof
slab / or dome, 20 mm thick cement
plaster with water proofing compound in
CM 1:3 proportion to inside face of the
container, including epoxy paint from
inside including refilling and disposing of
surplus stuff within lead of 50 M, all
labour and material charges, for laying
and jointing of pipe assembly for inlet,
outlet washout, over flow and bypass
arrangement consisting of C.I. M.S. D/F.
pipes, specials and valves of given
diameters, providing and fixing
accessories such as M.S. ladder inside
and outside, C.I. Manhole frame and
cover, water top slab, B.B. masonry
chamber for all valves, ventilating shafts,
including giving satisfactory hydraulic test
and water tightness test as per IS code
and providing three coats of cement
paints to all exposed surface of structure
including roof surface etc. complete as
per design data, criteria, obligatory
requirements and detailed specifications.
Anti-termite treatment shall be given for
underground portion of the structure. The RCC design should be got approved from the Govt. College of Engineering. on its own responsibility. Notes
1) The design shall be in accordance with
various relevant I.S. specification (I.S.
456/1978, I.S. 875 - 1987, I.S. 3370 -
1965 or revised.)
2) Only M.S. bars grade I conforming to I.S.
432 part-I or high yield strength deformed
bars conforming to I.S. 1786 or I.S. 1139
shall be used. Grade -II M.S. bars shall
not be used.
3) Entire structure shall be in M-300 only.
4) The scope of pipe assembly work shall
be upto 5 metre beyond outside face of
the wall, cost of pipes valves and specials
is not included in the rate but labour cost
for laying and jointing is included.
5) The G.S.R. / Sump above 15 lakh litres
capacity shall be in two compartment.
Sr. Rate (Rs.) 2020-2021
No.
Description
Unit
Rate (Rs.) 2019-2020
SECTION-K :(I) RCC GSR's AND SUMPS (273)
Complete Labour Complete Labour
Sr. Rate (Rs.) 2020-2021
No.
Description
Unit
Rate (Rs.) 2019-2020
6) The Job includes designing the structure
for uplift pressure and dewatering if
required during entire execution and
disposal of surplus excavated stuff within
lead of 50 metres as directed by
Engineer-in-charge. If uplifts considered
in design, then these rates shall be
increased by 7.5%.
7) G.S.R. outlets shall be with bell mouth of
approved pattern in bottom slab and cost
of designing bell mouth is included in the
rate. Sump well includes cost of suction
pit required at bottom.
8) For pipe diameters upto 300 mm only CI
pipes and CI specials shall be used. For
pipe diameters above 300 mm, M.S.
pipes and specials minimum 10 mm thick
shall be used with proper anticorrosive
epoxy treatment from inside and outside.
9) Cost of pump house is not included in
these rates.
10) Above rates are applicable for Seismic
Zones 2, 3 and 4.
11) 75% part rate shall be payable for
reinforcement, concrete and plastering
items of all types of G.S.R.s and sumps
till satisfactory hydraulic testing for water
tightness test is given and till that work
shall be treated as incomplete.
Note : Conditions from Sr. No. 1 to 11
shall form a part and parcel of tender and
must be included in the draft tender
papers for work of R.C.C. GSRs and
sumps.
Rates for RCC GSRs and Sumps
-
-
-
... More
Cap 2.0 Lakh Lit
1
-
1591963
... More
Item No 2
-
-
-
... More
Providing and supplying ISI standard
welded DI double flanged pipe
excluding GST levied by GOI & GOM in
all respect, railway freight, insurance,
unloading from railway wagon, loading
into truck transport to store / site,
unloading, stacking etc. complete as
directed by Engineer -in- charge. (for 2.75
m bare pipe)
-
-
-
... More
150 mm DI Double Flanged Pipes
15
-
2343
... More
Item No 3
-
-
-
... More
Providing and supplying ISI standard D. I.
specials & fitting with sealing rubber
gasket of S.B.R, complete with cast iron
follower gland and M. S. nut bolts coated
or otherwise protected from rusting and
suitable for D.I.pipes including cost of
labour ,materials, and transportation to
stores / site, loading and unloading
excluding GST levied by GOI & GOM in
all respect, complete as per IS-9523.
For all types of specials, bends tees
etc.
-
-
-
... More
80 to 300 mm dia
100
-
101
... More
Item No 4
-
-
-
... More
Providing double flange sluice valve
confirming for IS- 14846 including worn gear
arrangements as per test pressure, stainless
steel spindle, caps, including inspection
charges, transportation upto departmental
store, unloading, stacking excluding GST
levied by GOI & GOM in all respect etc.
complete. Sluice valves - PN -1 (Without by pass)
-
-
-
... More
150 mm dia s v
2
-
9580
... More
Total of sw no 2 -Rs
-
-
-
... More
SUB ESTIMATE NO. 3 :- PUMP HOUSE ABOVE SUMP (8.0 M DIA)
-
-
-
... More
Item No. 1
-
-
-
... More
Providing and casting in situ Cement Concrete of trap/ granite/ quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C, Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Execluding M.S or Tor reinforcement)
-
-
-
... More
RCC M -200 for
-
-
-
... More
A) Lift 0.0 to 5.00 M.
-
-
-
... More
1) for Columns
3.135
-
8130.15
... More
2) for Beam ,Brace
5.192
-
8016.75
... More
3) for Slab & Landing,steps
0.336
-
8638.35
... More
4) for Chajjas,pardi
0.81
-
8586.9
... More
B) Lift 5.00 to 10.00
-
-
-
... More
1) for Columns
1.438
-
8292.75
... More
2) Beam at Roof Slab Level
3.429
-
77878.07
... More
3) Roof Slab
12.698
-
8811.12
... More
Item No.2
-
-
-
... More
Providing and fixing in position steel bar
reinforcement of various diameters for
RCC piles, caps, footings, foundations,
slabs, beams, columns, canopies,
staircases, newels, chajjas, lintels,
pardies, copings, fins, arches, etc. as per
detailed designs, drawings and
schedules; including cutting, bending,
hooking the bars, binding with wires or
tack welding and supporting as required,
etc. complete (including cost of binding
wire). (Bd-F-17/306)
-
-
-
... More
Tor steel
1.774
-
66376.8
... More
Item No.3
-
-
-
... More
Providing second class Burnt Brick masonry with conventional / I.S type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete.
32.85
-
6304.2
... More
Item No. 4
-
-
-
... More
Providinginternalcementplaster20mmthickinSinglecoatsincementmortar1:4withoutneerufinish,toconcrete,bricksurface,inall positions including scaffolding and curing etc.complete.
177.76
-
411.6
... More
Item No. 5
-
-
-
... More
Providingsandfacedplasterexternallyincementmortarusingapprovedscreenedsand,inallpositionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofingcompoundat1kgpercementbagcuringthesamefornotlessthan2daysandkeepingthesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mmthickincementmortar1:4finishingthesurfacebytakingoutgrains and curing for fourteen days scaffolding etc.complete
-
-
-
... More
sand Face plasterin cm 1:4
230.03
-
712.95
... More
Item No.6
-
-
-
... More
Providingandfixingsteelframeofangle40x40x5mmsizeforwindowswith16mmdia.mildsteelbarshorizontallyat10cmc/cforventilatorportionand15cmc/cforremainingportionwithM.S.flatofsize40x6mmverticalatcenterincludingironholdfastboxesforfixing40x6mmverticalatcenterincludingironholdfastboxesforfixing shutters including welding finishing painting etc. complete.
7.2
-
1776.6
... More
Item No.7
-
-
-
... More
Providingandfixingframewith/withoutventilatorofsizeasspecifiedwithCountrycutteakwoodfordoorsandwindowsincludingchamfering,rounding,rebating,ironholdfastofsize300mmx40mmx5mm with oil painting, etc. complete
0.09
-
172804.8
... More
CCT wood frame for door
-
-
-
... More
Item No 8
-
-
-
... More
ProvidingandfixingCountrycutteakwooddoubleorsingleleafsecondclassfullypanelleddoorshutterwith35mmthickstyleandrailwith25mmthickpanelswithopenablefanlightasperdetaileddrawings.Excludingthedoorframe60mmx100mmstainlesssteelfixturesandfasteningandfinishingthewoodworkwithoilpainting3coats ,(excluding Door frame) etc complete
2.52
-
8219.4
... More
Item No.9 :-
-
-
-
... More
Providing and fixing aluminum sliding widows ( as per IS 1868/1982)Aluminum sliding window of three tracks with rectangular pipe 95 X 38.10 X 0.90 mm at weight 0.637 kg/Rmt.with window frame bottom track section 92 X 31.75 X 1.30 mm at weight 1.070 kg/Rmt. Top and side track section 92X31.75X1.30 mm at weight 0.933 kg/Rmt.The shutter should be ofbearing bottom 40 X 18 X 1.25 mm at weight 0.417 kg/Rmt.Inter locking section 40 x 18X 1.25 mmat weight 0.417 kg/Rmt.As per detailed drawings and at directed by Engineeringincharge with all necessary Aluminum sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc,complete .With colour Anodising with box .
-
-
-
... More
Sliding window 3 track
7.2
-
5422.2
... More
Item No. 10
-
-
-
... More
Providing and applying washable oil- bound distemper of approved colour and shade to old & new surface in two coats including scaffolding preparing the surface ( excluding the primer coat) complete.
177.76
-
41.48
... More
Item No. 11
-
-
-
... More
Providing and applying three coats of wProvidingandapplyingimpression24carratLuxurypaintofapprovedmake&approvedbrandEmulsionpainttointeriorwallsandceilingsofapprovedquality,colourandshadetonewsurfaceintwo coats, including sub surface prparation by Acrylic putty and Acrylic primercoatsincludingscaffolding,preparingthesurface.etc.complete (Low VOC).ater plastic emulsion paint of approved manufacture and of approved colour to the plastered surface including scaffolding if necessary cleaning and preparing the surface , watering for two days complete.
230.03
-
197.4
... More
Item No.12- Providing and applying two coats of lead/ zinc base oil paint bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaining and preparing the surface.( excluding primer coat)
19.44
-
79.8
... More
Item No. 13
-
-
-
... More
Providing and laying in position flooring of telephone black/Amba white /Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including ceent floats striking joints,pointing in CM 1:3 curing and cleaning etc. complete.
54.74
-
3822
... More
Item No.14
-
-
-
... More
Providing cement based water proofinf treatment to terrases ( indian water proofing or a like ) with brick bats laid in required slope to drain the water for any span after cleaning the base surface applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in CM 1:5 admixed with approved water proofing compound filling upto half depth of brick bats, curing the layer for three days, applying cement slurry over this layer joints of brick bats with CM1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm thick layers of same mortar added with juit fiber at 1 kg per bag including finishing the surface smooth with cement sluury addmixed with approved water proofing compound .marking finished surface with false squares of 300X300mm.making the junction at the prapet rounded and tappered top for required height with drip mould at the junction of Plaster and parrapet and curing and covering 10 years guarantee against the leak proofness on court fee stam paper of Rs.500 including ponding test etc...complete
-
-
-
... More
Water proofing to Slab
16.785
-
983.85
... More
Item No. 15 :- Providing and fixing in position copper lightening conductor including copper rod 20 mm dia upper terminal 1.5 M long with a knob at the end with a conical spike at top, aluminium tape conductor 20 x 3 mm size, copper earth plate of 3 mm thick and 0.81 sqm. in area clamps at 1 M centre to centre including, necessary excavation, laying and fixing the conductor providing and fixing 40 mm G.I pipe upto 3 M height from ground and 0.5 M. below ground including making all connections, filling earthing pit with charcoal, salt, etc, refilling& watering , etc, complete. as per specifications laid down in relvant I.S code .
1
-
11854.5
... More
Item No 16
-
-
-
... More
Providing and fixing water level Indicator upto 5M height including M.S. enamelled gauge plate 300 mm wide and 3 mm thick,copper float ,providing and fixing required accessories such as pointer ,pulleys,nylon thread including cost of all material ,labour,etc complete.
1
-
9888.9
... More
Item No.17
-
-
-
... More
Providind and painting the name plate with oil paint ….etc Complete
-
-
-
... More
Name Plate
1
-
3000
... More
Total ofs w no 3 Rs
-
-
-
... More
Sub Work no 4.) -PURE WATER PUMPING MACHINERY - 50 H.P. VT PUMP
-
-
-
... More
4.1) - 50 H.P. VT PUMP
-
-
-
... More
1)Vertical Turbine PumpSet (Water Lubricated)
Providing, Installing, Commissioning & giving test & trial @ site of work Water Lubricated V.T Pump multistage Water lubricated complete with strainer, suction bell , bowl assembly discharge head,motor stool shall be capable of discharging 59 LPS against a total head of 39 m from all causes including Cast Iron bowl assembly & discharge head etc. The Pump shall have discharge head, including provision of Sole Plate etc complete . Col. assembly of 150 mm dia. base frame of suitable ISMB, Stainless Steel Impeller etc as per detailed specifications enclosed. The Pump shall be suitable for VHS Motor.
2
-
950000
... More
SLUICE VALVE - 200 mm dia PN 1.0
-
-
-
... More
2A)Glandless Sluice Valve :- Providing & erecting 200 mm P.N. 1.0 C.I D.F sluice valve con to I.S, 14846-2000 with all necessary jointing material as per detailed specifications
2
-
39828
... More
SLUICE VALVE ( For R.M. ) - 250 mm dia, PN 1
-
-
-
... More
2B)Glandless Sluice Valve :- Providing & erecting 250 mm P.N. 1.0 C.I D.F sluice valve con to I.S, 14846-2000 with all necessary jointing material as per detailed specifications
1
-
68627
... More
3A )REFLUX VALVE- 200 mm dia PN 1.0
-
-
-
... More
Designing, Providing, Erecting, Testing & Commissioning 200 MM dia, Cast Iron D.F. Reflux valve of PN - 1.0 rating generally conforming to IS- 5312, Part I with renewable gun metal sealing face on swing door without bypass arrangement as per detailed specifications enclosed.
2
-
20716
... More
3B )REFLUX VALVE ( For R.M ) - 250 mm dia, PN 1
-
-
-
... More
Designing, Providing, Erecting, Testing & Commissioning 250 MM dia, Cast Iron D.F. Reflux valve of PN - 1.0 rating generally conforming to IS- 5312, Part I with renewable gun metal sealing face on swing door without bypass arrangement as per detailed specifications enclosed.
1
-
33688
... More
4)KINETIC AIR VALVE ( 80 MM )
-
-
-
... More
Designing Providing erecting commissioning with test and trial of 80 mm dia Kinetic Double Orific type Air Valves Pn 1.0 rating as per MJP's standard specifications having small orific elastic ball resting on agun metal orific , nipple, large orific, vulcantile ball seating on
1
-
11691
... More
5)M. S. D/F PIPES & SPECIALS
-
-
-
... More
Designing fabricating providing erecting MS pipes and specials for cable tray supports, Drain pipes for D.G. set , Pipe works & items related to all other similar work including cutting , bending & Painting as per detailed specifications.
750
-
79
... More
6) M.S. DISMANTLING JOINT
-
-
-
... More
Providing erecting & commissioning M.S. Dismantling Joint of 200 mm dia.as per requirement & Department's approved drawing & specifications,including machining & rubber rings & suitable for 16 kG / cm2 working pressure with required flanges of suitable size with nut bolts
2
-
8933
... More
7)M.S. FLANGED JOINTS
-
-
-
... More
Providing & making flanged joints to flanged M.S. pipes of all classes / specials etc. including cost of jointing materials ( rubber packing, nut bolts etc ), labour , hydraulic testing etc complete.
-
-
-
... More
A)200 mm Dia
25
-
943
... More
b)250 mm Dia
6
-
1342
... More
c)80 mm Dia
6
-
266
... More
8)M.S.Flanges
-
-
-
... More
Providing & erecting 100 mm M.S. flanged joints to flanged M.S. pipes of all classes / specials with all jointing material rubber packing, nut bolts etc.
100
-
137
... More
9)Pressure Gauge
-
-
-
... More
Designing , Providing ,erecting commissioning with test & trial of Pressure gauge of 150 mm capacity complete with Syphon tube, isolating cock etc suitable for 12 mm dia.Pipe
3
-
1733
... More
10A)Hand Operated Travelling Crane - 3 MT
-
-
-
... More
providing erecting & commissioning of single girder hand opersted circular travelling crane with 6 mtr lift complete with chain pulley block of ISI mark & travelling trolley both tested for 50 % overload including arrangement for longitudinal travel / circular travel & cross travel with wheel hand chain etc complete as per detailed specifications, Capacity 3 M.T. with 8 mtr span
1
-
179797
... More
10B)Square Bar
-
-
-
... More
Providing, erecting & fixing square bar of EN 8 as rail for over head crane on provided track girder / contineous carbel beam, including supporting plate & " J " bolts
24
-
988
... More
11) M.S.STRUCTURAL STEEL WORK
-
-
-
... More
Providing fabicating and fixing MS Structural Steel work for necesaary Support of Panel Board, Sluice Valve, Reflux Valve, Delivery Line and Lifting arrangement etc complete per detailed specifications attached.
0.5
-
64187
... More
12)V.H.S. MOTOR ( 50 HP )
-
-
-
... More
Designing Providing erecting & Commissioning of Vertical hollow shaft SPDP motor 1500 RPM, squirel cage energy efficent Induction Motor, confirming to IS 12165 having continous rating suitable for operation at 415 Volts + / - 10 % , 3 Phase, 50 Hz, + / - 3 % with " F " class insulation, temperature rise limited to class 'B' insulation, suitable to drive the pumps under Item No-1 etc complete as per detailed specifications attached.
2
-
162381
... More
13)AUTO TRANSFORMER STARTER ( 60 HP )
-
-
-
... More
Providing erecting And giving test and trial of fully automatic, Auto transformer starter with Air break contactor,assembled locally with Contactors of approved make in 14 SWG sheet fabricated floor mounted type cubicle panel, suitable for operation on 380-440 Volts, 3 Phase, 50 Hz, fitted with accessories. The incoming & outgoing cable end boxes shall be on either sides of main panel. The cable entries from auto transformer shall be totally enclosed in sheet metal. The starter shall have screened louvers on both sides.
2
-
104480
... More
14)L.T. PANEL- 50 HP
-
-
-
... More
Designing , Providing , Erecting & Commissioning L.T. Control Panel comprising of 400 A M.C.C.B, Volt meter, ammeter, selector switch, motor protection relay& wiring etc.complete.
1
-
175841
... More
15)APFC Panel
-
-
-
... More
Supplying and erecting 20 kVAr, 440 V 3 phase, 50 Hz., thyrister
switched micro APFC passive filter panel, consisting of suitable
steps of APP type capacitor units with harmonic filter reactors, as per specification no CP-ED/APFC
1
-
88352
... More
16A)GI EARTHING FOR PUMPING MACHINERY
-
-
-
... More
Supplying & erecting Galvanised cast iron plate 60 X 60 X 0.6 cm burried in speciallyprepared earth pit refilling with 40 kG charcoal & salt in alternate layers 19 mm dia. Vertical G.I. Pipe 1.5 mtr lon with funnel & mesg @ top for watering a break masonry block, C.I. cover complete with necessary length of double G.I. earth strip bolted with plate & covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to nearest switchgear with end socket as per direction & duly tested with earth tester & recording the results etc complete as per detailed specifications 4 Nos.
4
-
5159
... More
16B)G. I. EARTHING STRIP
-
-
-
... More
Supplying & erecting G.I.strips 25 X 5 mm as per datailed specifications
100
-
194
... More
17)CABLES
-
-
-
... More
Designing Providing erecting commissioning with test and trial of Aluminium conductor XLPE, 1.1 kV armoured cable complete erected in approved trench or on trays as per direction of Engineer in Charge.
-
-
-
... More
A) 1.1 KV Aluminium XLPE armoured cable from L.T. Panel to Starter 3.5 C X 1 Run X 70 Sq.mm. Aluminiun XLPE armoured Cable for main Supply form transformer
100
-
422
... More
B) 1.1 KV Aluminium XLPE armoured cable from L.T. Panel to Starter 3 C X 1 Run X 50 Sq.mm. Aluminiun XLPE armoured Cable for 50 HP ATS to VHS Motor
50
-
277
... More
C) 1.1 KV Aluminium XLPE armoured cable from L.T. Panel to Starter 3 C X 1 Run X 16 Sq.mm. Aluminiun XLPE armoured Cable for APFC
20
-
169
... More
D)Cable glands & lugs
1
-
7500
... More
E)Making Cable Trench in Soft Soil as per specifications
50
-
143
... More
18)TOOLS
-
-
-
... More
Providing tools as per detailed specifications attached.
1
-
34963
... More
19)Electrification
-
-
-
... More
Providing erecting commissioning Indoor Lightning shall comprise of point wiring, fluorscent fitting, with suitable size FR copper conductor n rigid PVC conduit etc as per detailed specifications
-
-
-
... More
Indoor Electrification
1
-
31984
... More
Outdoor Electrification
1
-
237741
... More
20)FULL BORE ELECTROMAGNETIC FLOW METER
-
-
-
... More
Manufacturing, supplying & commissioning Electromagnetic Flow Meter ( EMF ) with accuracy + / - 0.5 % of measured value & protection as per given specifications including senser , transmitter surge arrester, cable duct seperate PVC of 25 mm dia for 25 mtrs senser transmitter surge arrester, flow meter in the pipelines with tool tackles, crane etc. with flowmeter transmeter panel cubical as per detailed specifications
-
-
-
... More
A)200 mm dia EMF for ESR
1
-
140257
... More
B)150 mm dia EMF for Inlet Water
1
-
118241
... More
21)Brick Masonery Chambers for Flow Meter
-
-
-
... More
Flow meter chamber work with suitable manhole for entering the chamber and removal of flow meter for maintenance in future, providing and constructing B.B. masonry flow meter chamber with 15 cm thick 1:3:6 proportion PCC bedding, including excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing suitable manhole arrangement & cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-charge. 1.5 X 1.5 X 1.5 depth
2
-
24222
... More
22)DI/ CI / MS D/F PIPES & SPECIALS
-
-
-
... More
Designing fabricating providing erecting MS pipes and specials for cable tray supports, Drain pipes for D.G. set , Pipe works & items related to all other similar work including cutting , bending & Painting as per detailed specifications.
600
-
79
... More
23)C C Foundation
-
-
-
... More
Providing and casting CC Fundation for Pump, Panel, Starters etc as per specifications.. M-150
2
-
5726
... More
24)TEST & TRIAL
-
-
-
... More
Testing Operating & trials of Pumpunfg Machinery as per detailed specification attached.
3
-
22200
... More
TOTAL of 4.1
-
-
-
... More
4.2) Simple Automation
-
-
-
... More
1)pH analyser :- Designing, supplying, installing, commissioning and testing of pH analyser as per IUPAC (International Union for Pure and Applied Chemistry) at A.F. and interfacing with PLC . Range: 0 to 14. pH accuracy: better than 0.1% of full scale. Supply voltage 24 VDC. Output: 4 to 20 mA.
1
-
86076
... More
1) at Pure Water Sump
-
-
-
... More
2)Residual Chlorine analyser at Pure Water Pump House :- Designing, supplying, installing, commissioning and testing of Residual Chlorine analyser/ meter must have autmatic senser cleaning facility at pure water sump and interfacing with PLC panel. Residual Chlorine analyser/ meter shall comprise of three components i.e. sensors, flow through assembly and transmitter with indicator. Transmitter converts the signal to 4 to 20 mA and gives two outputs one to SCADA and another to indicator. Overall range 0 to8 mg/l(ppm) NTU. Measuring range 0.03 to 2mg/l. Accuracy : 2% of full scale. Supply voltage : 230 Volts AC output 4-20 mA. Membrane free sensor of 2 gold plated electrodes (ag/Agcl) must be provided to avoid maintaince IP 65 Neema 4 housing protection class required
1
-
224763
... More
3)Ultrasonic level transmitter at Pure Water Sump - CE marked with following technical parameters at Raw Water Pump House and Interfacing with PLC panel as per detailed specifications. (Range 0-5 mtrs,Output 0-20mA,Power supply 24 V DC,Display -4" LED, etc as per specifications)
-
-
-
... More
a)New Sump
1
-
43038
... More
b)Old Sump
1
-
43038
... More
4)Pressure Transmitter - Designing, supplying, Installing, commissioning & testing of pressure transmitter CE marked with following technical parameters at raw water pump house & interfacing with PLC panel as per detailed specifications.
2
-
30128
... More
5)Power Analyser - Designing, supplying, Installing, commissioning & testing of Power Analyser interfacing to PLC panel with RS485 output as per IEC 62053 & in the prescribed format and including mounting arrangement as per detailed specifications, For 2 HP Pumps - 1 Nos & For 10 HP Pumps - 1 Nos
1
-
27651
... More
6)Interfacing to Magnetic Flow Meter - Iinterfacing of MFM to PLC panel in the prescribed format and programming in PLC as per detailed specifications
1
-
12000
... More
7)PLC Panel with HMI - Designing, supplying, Installing, commissioning & testing of PLC Panel with HMI including following items:
a.Control Panel suitable for installation b. PLC CPU
c. I/O cards & Rack as per requirement
d. SMPS
e. HMI 10"
f. Power supply cable
g.Interfacing cards,interfacing cables ,and interfacing of Field instruments, Equipments as per Schematics diagram and as per detailed specification
1
-
199200
... More
8A)Cables - Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of 2 C x 1.5 sq.mm as per IS 694 twisted shielded copper armoured conductor on wall in GI tray or in ground suitable for supplied D C voltage.
300
-
84
... More
8B)Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of CAT 6 as per ISO/IEC-11801 std.cable for networking on wall in GI tray or in ground required .
300
-
67.6
... More
8C)esigning, Supplying, Installing, commissioning & testing with Terminating & Interfacing of 2 pair x 1.0 sq.mm as per IS 694 copper shielded twisted multistrand armoured conductor on wall in GI tray or in ground
200
-
149
... More
8D)Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of 3 pair x 1.0 sq.mm as per IS 694 copper shielded twisted multistrand armoured conductor on wall in GI tray or in ground
200
-
189
... More
8E) Designing, supplying, installing, commissioning and testing bending, cutting perforated GI trays of 150X20 mm X3 mm thickness for laying of cables.
30
-
253.8
... More
9)EARTHING - Providing making separate Earthing arrangement for SCADA & Automation system with Copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification No.EA-EP
4
-
5159
... More
10)Surveillance system - Desiging,supplying, installing, commissioning & testing of CCTV IR water proof camera suitable for upto 100ft.with IR Dome camera,control key board,DVR,Hard Disk,cables,UPT transreceivers etc.complete as per detailed specifications.
2
-
24468
... More
11)Flow Control Valve/ Pressure Reducing Valve -Designing, Supplying, Installing, Commissioning & testing of Flow Control Valve / Pressure reducing valve / Altitude Valve for inlet / outlet with flow controlling, pressure controlling & monitoring on web and to the pipeline feeding to ESR / MBR / GSR with cable, PLC etc. complete .
-
-
-
... More
On 150 mm Dia Gravity Main near Pure water Sump
1
-
172002
... More
ESR
-
-
-
... More
12)Ultrasonic level transmitter at Pure Water Sump - CE marked with following technical parameters at Raw Water Pump House and Interfacing with PLC panel as per detailed specifications. (Range 0-5 mtrs,Output 0-20mA,Power supply 24 V DC,Display -4" LED, etc as per specifications)
-
-
-
... More
New ESR
1
-
43038
... More
Old ESR
1
-
43038
... More
13)PLC Panel suitable for Wireless communication- PLC based Control Monitoring and communication software: PLC Panel suitable for Wireless communication signing.supplying, Installing commissioning & testing of following equipments with satisfactory test and trial of PLC Panel control, monitoring and communication system along with PLC Panel at Central monitoring system..
2
-
146626
... More
14)Providing, installing, testing and commissioning of Desk Top PC/ Laptop with programming software run time version alongwith required cables and communication devices for PLC and SCADA programming ( web based)
1
-
55000
... More
15)Providing, installing, testing and commissioning of all in one Laser Printer HP, Samsung or equivalent make
1
-
20000
... More
16)Supplying & erecting on line UPS pure sine wave of 1 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins. battery backup, as per specification no. AP-UPS
1
-
35840.95
... More
17)Comprehensive O & M for Complete Automation
-
-
-
... More
Operation and Maintenance Charges of the whole water supply scheme on Simple Automation System and generation of daily report of water quality parameters and electrical parameters with specific consumption in kWh/ml . The report shall be mailed daily to the head quarters for monitoring purpose.
-
-
-
... More
During First year
0.03
-
1548459
... More
During Second year
0.05
-
1548459
... More
During Third year
0.07
-
1548459
... More
During Fourth year
0.07
-
1548459
... More
During Fifth year
0.07
-
1548459
... More
18)Recuring Charges of 2 SIM cards for GPRS application, for duration of Five years
1
-
24000
... More
Total 4.2
-
-
-
... More
4.3 ) SOLAR
-
-
-
... More
Total Proposed Capacity of Solar Plant - 11 kWp
-
-
-
... More
Supplying, installing, testing and commissioning of 11 kWp capacity on grid solar power pack with GI Mounting structure and inter connecting wires / cables without battery bank SPV modules and solar power conditioning unit of required capacity complete, with 5 years on site performance warrantee. Specification no. ESD-RTONG
1
-
502854
... More
Total 4.3 Rs
-
-
-
... More
Sub Work No : -5- Rising Main from Sump To ESR
-
-
-
... More
Item No -1
-
-
-
... More
Providing and supplying ISI standard D. I.
specials & fitting with sealing rubber
gasket of S.B.R, complete with cast iron
follower gland and M. S. nut bolts coated
or otherwise protected from rusting and
suitable for D.I.pipes including cost of
labour ,materials, and transportation to
stores / site, loading and unloading
excluding GST levied by GOI & GOM in
all respect, complete as per IS-9523.
For all types of specials, bends tees
etc.
-
-
-
... More
DI specials - 80 To 300 Mm dia
100
-
101
... More
Providing and supplying D.I. fittings with ISI mark
Mechanical joint confirming to tables 12 to table 31 of IS
9523/2000 upto latest amendments including cost of SBR/
EDPM gaskets, Nuts, Bolts, Washers and Ductile iron
follower glands. Fittings should be with internally Ordinary
portland cement mortor lined and externally metallic zinc
coating/zinc rich paint with finishing layer of black bitumen
coating including transportation and excluding all statutary
duties and taxes such as GST levied by Gol and GoM in all
respect etc. complete.
-
-
-
... More
250 mm Dia
2
-
6635
... More
Item No :-3
-
-
-
... More
Providing and supplying ISI standard MS
specials of required thickness with 3
coats of approved make epoxy paint
(Shalimar, Ciba or Mahindra & Mahindra
make) from inside and outside excluding
all statutory duties & taxes such as GST
levied by GOI & GOM in all respect,
inspection charges, transportation to
stores / site, and stacking, etc. complete.
-
-
-
... More
M S pecials
100
-
79
... More
All socketed
-
-
-
... More
Item No -4
-
-
-
... More
Providing double flange sluice valve
confirming for IS- 14846 including worn gear
arrangements as per test pressure, stainless
steel spindle, caps, including inspection
charges, transportation upto departmental
store, unloading, stacking excluding GST
levied by GOI & GOM in all respect etc.
complete.
a) Sluice valves - PN -1 (Without by pass)
-
-
-
... More
250 mm dia. Sluice valve PN-1
1
-
26848
... More
Item No -5
-
-
-
... More
Providing and supplying Kinetic Double
Orifice type Air Valves confirming to IS
14845 as per MJP’s standard specifications
combined with screw down isolating valve,
small orifice elastic ball resting on a gun
metal orifice nipple, large orifice vulcanite ball
seating on moulded seat ring, inlet face and
drilled, including insurance, third party
inspection charges, loading, unloading,
transportation upto departmental stores,
excluding GST levied by GOI & GOM in all
respect etc. complete.
-
-
-
... More
50 mm dia kinetic air Valve Flanged PN-1
1
-
9576
... More
Item No -6
-
-
-
... More
Excavation for foundation / pipe trenches in
earth, soils of all types, sand, gravel and
soft murum,Hard Murum , boulder soft rock, old cement and lime masonry foundation asphalt road, hard rock and concreat road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, including removing the excavated
material upto a distance of 50 metres and lifts
as below, stacking and spreading as directed,
normal dewatering, preparing the bed for
foundation and excluding backfilling, etc.
complete. (Bd-A-1,2,3,4,5/259)
-
-
-
... More
Lift 0 to 1.50 M
18.7
-
519.81
... More
Item no -7
-
-
-
... More
Filling in plinth and floors / trenches with
contractor's murum for bedding in 15 cm to
20 cm layers including watering and
compaction, etc. complete. (Bd-A-11/263)
2.55
-
76.65
... More
Item no -8
-
-
-
... More
Lowering laying and jointing with SBR ruber gaskets
C.I. S/S pipes of various classes with CI / MS specials of
following diameter in proper position, grade and alignment
as directed by Engineer-in-charge including conveyance of
material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete.
Note : Only SBR Rubber gaskets to be used as per
IS-5382 and IS-12820.
-
-
-
... More
A)250 mm dia. D.I. K-9 pipes (Without rubber ring)
20
-
135
... More
Rs(135)+5%
-
-
-
... More
(MJP DSR 2019-20, P no 84 ,Item No.2-vi)
-
-
-
... More
Item no -9
-
-
-
... More
Hydraulic testing of C.I./D.I. pipe line to specified
pressure including cost of all materials and
labour and water for testing for specified length
including cutting, placing end cap making arrangement
for filling safe water using reciprocating
type pumps which should be able to provide
specified test pressure gauges and other
necessary equipments, labour, operation
charges, etc. required for testing. The rate under
this item shall also include cost of retesting,
if necessary and reinstating to original position
using water supplied by the contractor.
-
-
-
... More
without Rubber Ring
-
-
-
... More
A)250 mm dia. D.I. K-9 pipes (Without rubber ring)
0.02
-
15730.05
... More
Item no -10
-
-
-
... More
Lowering, laying and jointing in position
following C.I.D/F Reflex valves, Butterfly
valves and Sluice valves including cost of
all labour jointing material, including nut bolts
and giving satisfactory hydraulic testing etc.
complete. (Rate for all class of valves.)
-
-
-
... More
250 mm dia. Sluice valve PN-1
1
-
4618.95
... More
Item no -11
-
-
-
... More
Lowering, laying and fixing in proper
alignment and position all types of C.I. air
valves as directed by Engineer-in-charge
including cost of conveyance from stores to
site of work, cost of all material and giving
satisfactory hydraulic testing, etc. complete.
(for all class of valves).
-
-
-
... More
50 mm dia kinetic air Valve Flanged PN-1
1
-
364.35
... More
Item no -12
-
-
-
... More
Providing and constructing B.B. masonry valve
chamber with 15 cm thick 1:3:6 proportion
PCC bedding, excluding excavation, B.B.
masonry in CM 1:5 proportion precast RCC
frame and cover, etc. complete as directed by
Engineer-in-charge.
chamber with 15 cm thick 1:3:6 proportion
PCC bedding, excluding excavation, B.B.
masonry in CM 1:5 proportion precast RCC
frame and cover, etc. complete as directed by
Engineer-in-charge.
-
-
-
... More
size 90x60
2
-
9851.1
... More
Item no -13
-
-
-
... More
Providing and laying in situ Cement
Concrete M-15 of trap/ granite / quartzite
/ gneiss metal for foundation and
bedding including bailing out water, form
work, compaction, curing, etc. complete.
(Cement 5.90 bags / cum)
Spec. No. - Bd E /1 Page No. 287
-
-
-
... More
P.C.C. M-150 (1:2:4)
5.08
-
5968.2
... More
Item no -14
-
-
-
... More
Providing and fixing in position steel bar
reinforcement of various diameters for
RCC piles, caps, footings, foundations,
slabs, beams, columns, canopies,
staircases, newels, chajjas, lintels,
pardies, copings, fins, arches, etc. as per
detailed designs, drawings and
schedules; including cutting, bending,
hooking the bars, binding with wires or
tack welding and supporting as required,
etc. complete (including cost of binding
wire). (Bd-F-17/306)
-
-
-
... More
Tor steel
2.1
-
66376.8
... More
Item no -15
-
-
-
... More
Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in
15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
10.09
-
76.65
... More
Totalof s w no 5
-
-
-
... More
SUB WORK NO- 6. ESR
-
-
-
... More
Item No 1
-
-
-
... More
ESR Cap 8.0 Lakh lit
-
-
-
... More
Designing (aesthetically), and
constructing RCC elevated service
reservoirs of following capacity with
RCC staging consisting of columns,
internal and external bracings spaced
vertically not more than 4.5 metres
centre to centre for ESR having
capacity upto 500 cum and not more
than 6 m c/c for ESRs having capacity
above 500 Cum including excavation in
all types of strata, foundation concrete,
cement plaster with water proofing
compound to the inside face of the
container including refilling disposing
off the surplus stuff within a lead of 50
metres, all labour and material charges
including lowering, laying, erecting,
hoisting and jointing of pipe
-
-
-
... More
assembly of inlet, outlet, washout,
overflow and bypass arrangements
as per departmental design, providing
and fixing accessories such as M.S.
ladder, C.I. manhole frame and covers,
water level indicators, lightening
conductor, G.I. pipe railing around walk
way and top slab, providing spiral stair
case from ground level to roof level,
M.S. grill gate of 2 M height with locking
arrangement of approved design, B.B.
masonry chambers for all valves,
ventilating shafts, providing and
applying three coats of cement paint to
the structure including roof slab, epoxy
painting to internal surface and antitermite
treatment for underground parts
of the structure and giving satisfactory
water tightness test as per I.S. code.
The job to include painting the name of
the scheme and other details on the
reservoir as per the directions of
Engineer-in-Charge. The RCC design should be got approved from the Govt. College of Engineering. on its own responsibility. Notes
-
-
-
... More
Notes
-
-
-
... More
1) The design of the structure be in
accordance with relevant I.S.
specification (I.S. 3370 - 1965 or
revised.)
-
-
-
... More
2) The design shall satisfy the stipulations
as per I.S. 1893 - 1984 and I.S. 13920 /
1993 for seismic force and I.S. - 11682
/ 1985 for R.C.C. staging of overhead
tanks.
-
-
-
... More
3) For design having more than 6
columns, provision of internal bracing is
obligatory. External bracings is also
obligatory.
4) The entire structure shall be in M-300
mix only.
5) Plain round mild steel bars grade-I
conforming to I.S. 432 part-I or high
yield strength deformed bars
conforming to I.S. 1786 or I.S. 1139
shall be used, grade-II mild steel bars
will not be allowed.
6) Irrespective of the type of foundation
proposed in the design, one set of
bracing be provided at the ground level.
7) These rates include providing M.S.
ladder for E.S.R.s upto 2 lakh litres
capacity and providing spiral staircase
for E.S.R. above 2 lakh litres capacity.
8) Staging shall have to be designed with
stresses of M-200 concrete for ESR.
However all RCC construction should
be done in M-300.
9) These rates are including the cost of
uplift pressure if any and entire
dewatering during execution. In case of
water logging area where water is
stretch at shallow depth, extra provision
of dewatering shall be made as per site
condition.
10) All conditions given in the Member
Secretary's Circular No. MJP / TS-I /
350 / 1668 dt. 2-8-97 and MJP / S-I /
350 / 2127 dt. 13-7-99 shall be strictly
followed and additional cost, if any, due
to these conditions is included in the
rates mentioned below.
11) 75% part rate shall be payable for
reinforcement concrete and plastering
items of containers of E.S.R. till
satisfactory hydraulic testing for water
tightness is given; and till that work
shall be treated as incomplete.
12) The rates indicated in the table are
excluding the cost of pipes, specials
and valves required for inlet, outlet,
washout, overflow and bypass
arrangement. The scope of work,
however, includes cost of erecting,
laying and jointing of pipes and valves
including cost of jointing materials upto
5 M beyond outer face of outermost
column.
SECTION-K : (II) RCC ESR's (
-
-
-
... More
10) All conditions given in the Member
Secretary's Circular No. MJP / TS-I /
350 / 1668 dt. 2-8-97 and MJP / S-I /
350 / 2127 dt. 13-7-99 shall be strictly
followed and additional cost, if any, due
to these conditions is included in the
rates mentioned below.
11) 75% part rate shall be payable for
reinforcement concrete and plastering
items of containers of E.S.R. till
satisfactory hydraulic testing for water
tightness is given; and till that work
shall be treated as incomplete.
12) The rates indicated in the table are
excluding the cost of pipes, specials
and valves required for inlet, outlet,
washout, overflow and bypass
arrangement. The scope of work,
however, includes cost of erecting,
laying and jointing of pipes and valves
including cost of jointing materials upto
5 M beyond outer face of outermost
column.
SECTION-K : (II) RCC ESR's (280)
Complete Labour Complete Labour
Sr. Rate (Rs.) 2020-2021
No.
Description
Unit
Rate (Rs.) 2019-2020
13) For ESR upto 500 cum capacity C.I.
double flanged pipes upto 300 mm dia
shall be provided and C.I. specials shall
be used. For ESR above 500 cum
capacity C.I./M.S. pipe assembly with
minimum 8 mm thickness upto 500 mm
dia and minimum 10 mm thickness
above 500 mm dia can be used with
proper anti-corrosive epoxy treatment
from inside and outside.
14) Below mentioned rates are for
foundations with individual footing with
bearing capacity of 20 tonnes per
square metre. For raft foundations,
these rates shall be increased by 7.5%
where safe bearing capacity (SBC) is 5
MT per sqm and by 5% where SBC is
more than 5 MT/sqm and upto 10
MT/sqm. This % of 5% or 7.5% is
applicable for estimation of amount of
lumpsum item of ESR. For extra item
due to change from individual
foundation to raft, actual increase in
concrete and steel be paid as per
relevant DSR item.
15) The rate shall be increased by 30% for
bearing piles upto depth of 10 M and for
further increased in depth by 5 M each,
it shall be increased by another 10%.
These rates are applicable where raft is
not feasible. For pile foundations
sulphate resistant cement shall only be
used. Single pile for the column is not
permitted, group of piles shall be
designed with pile cap for each column
of ESR.
16) The rates are applicable for staging
-
-
-
... More
13) For ESR upto 500 cum capacity C.I.
double flanged pipes upto 300 mm dia
shall be provided and C.I. specials shall
be used. For ESR above 500 cum
capacity C.I./M.S. pipe assembly with
minimum 8 mm thickness upto 500 mm
dia and minimum 10 mm thickness
above 500 mm dia can be used with
proper anti-corrosive epoxy treatment
from inside and outside.
14) Below mentioned rates are for
foundations with individual footing with
bearing capacity of 20 tonnes per
square metre. For raft foundations,
these rates shall be increased by 7.5%
where safe bearing capacity (SBC) is 5
MT per sqm and by 5% where SBC is
more than 5 MT/sqm and upto 10
MT/sqm. This % of 5% or 7.5% is
applicable for estimation of amount of
lumpsum item of ESR. For extra item
due to change from individual
foundation to raft, actual increase in
concrete and steel be paid as per
relevant DSR item.
15) The rate shall be increased by 30% for
bearing piles upto depth of 10 M and for
further increased in depth by 5 M each,
it shall be increased by another 10%.
These rates are applicable where raft is
not feasible. For pile foundations
sulphate resistant cement shall only be
used. Single pile for the column is not
permitted, group of piles shall be
designed with pile cap for each column
of ESR.
16) The rates are applicable for staging
-
-
-
... More
15) Rcc design duly approved by Govt. Engineering college should be submitted by Contractor
-
-
-
... More
Rates for RCC ESR 8.0 L cap & staging 25 m
-
-
-
... More
8 Lakh lit and 25 M staging
1
-
7803957
... More
Item No 2
-
-
-
... More
Providing and supplying ISI standard
welded DI double flanged pipe
excluding GST levied by GOI & GOM in
all respect, railway freight, insurance,
unloading from railway wagon, loading
into truck transport to store / site,
unloading, stacking etc. complete as
directed by Engineer -in- charge. (for 2.75
m bare pipe)
-
-
-
... More
250 mm DI double Flanged Pipes
140
-
4069
... More
Item No 3
-
-
-
... More
Providing and supplying ISI standard D. I.
specials & fitting with sealing rubber
gasket of S.B.R, complete with cast iron
follower gland and M. S. nut bolts coated
or otherwise protected from rusting and
suitable for D.I.pipes including cost of
labour ,materials, and transportation to
stores / site, loading and unloading
excluding GST levied by GOI & GOM in
all respect, complete as per IS-9523.
For all types of specials, bends tees
etc.
-
-
-
... More
80 to 300 mm dia
1100
-
101
... More
Item No 4
-
-
-
... More
Providing double flange sluice valve
confirming for IS- 14846 including worn gear
arrangements as per test pressure, stainless
steel spindle, caps, including inspection
charges, transportation upto departmental
store, unloading, stacking excluding GST
levied by GOI & GOM in all respect etc.
complete. Sluice valves - PN -1 (Without by pass)
-
-
-
... More
1) 250 mm dia. Sluice valve PN-1.0 Without Buy pass
4
-
26848
... More
Total of s w no 6Rs
-
-
-
... More
Sub Work No : -7 -Distribution system
-
-
-
... More
Item No -1
-
-
-
... More
Providing and supplying ISI standard D. I.
specials & fitting with sealing rubber
gasket of S.B.R, complete with cast iron
follower gland and M. S. nut bolts coated
or otherwise protected from rusting and
suitable for D.I.pipes including cost of
labour ,materials, and transportation to
stores / site, loading and unloading
excluding GST levied by GOI & GOM in
all respect, complete as per IS-9523.
For all types of specials, bends tees
etc.
-
-
-
... More
DI specials - 80 To 300 Mm dia
776
-
101
... More
Item No -2
-
-
-
... More
Providing and supplying D.I. fittings with ISI mark
Mechanical joint confirming to tables 12 to table 31 of IS
9523/2000 upto latest amendments including cost of SBR/
EDPM gaskets, Nuts, Bolts, Washers and Ductile iron
follower glands. Fittings should be with internally Ordinary
portland cement mortor lined and externally metallic zinc
coating/zinc rich paint with finishing layer of black bitumen
coating including transportation and excluding all statutary
duties and taxes such as GST levied by Gol and GoM in all
respect etc. complete.
-
-
-
... More
100 mm dia. DI K-7 pipes
10
-
2292
... More
150 mm dia. DI K-7 pipes
5
-
2805
... More
200 mm dia. DI K-7 pipes
2
-
5015
... More
Item No :-3
-
-
-
... More
Providing and supplying ISI standard MS
specials of required thickness with 3
coats of approved make epoxy paint
(Shalimar, Ciba or Mahindra & Mahindra
make) from inside and outside excluding
all statutory duties & taxes such as GST
levied by GOI & GOM in all respect,
inspection charges, transportation to
stores / site, and stacking, etc. complete.
-
-
-
... More
M S pecials
300
-
79
... More
All socketed
-
-
-
... More
Item No -4
-
-
-
... More
Providing double flange sluice valve
confirming for IS- 14846 including worn gear
arrangements as per test pressure, stainless
steel spindle, caps, including inspection
charges, transportation upto departmental
store, unloading, stacking excluding GST
levied by GOI & GOM in all respect etc.
complete.
a) Sluice valves - PN -1 (Without by pass)
-
-
-
... More
100 mm dia. Sluice valve PN-1
4
-
6388
... More
150 mm dia. Sluice valve PN-1
4
-
9580
... More
200 mm dia. Sluice valve PN-1
4
-
17365
... More
Item No -5
-
-
-
... More
Excavation for foundation / pipe trenches in
earth, soils of all types, sand, gravel and
soft murum,Hard Murum , boulder soft rock, old cement and lime masonry foundation asphalt road, hard rock and concreat road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, including removing the excavated
material upto a distance of 50 metres and lifts
as below, stacking and spreading as directed,
normal dewatering, preparing the bed for
foundation and excluding backfilling, etc.
complete. (Bd-A-1,2,3,4,5/259)
-
-
-
... More
Lift 0 to 1.50 M
1430.56
-
519.81
... More
Item no -6
-
-
-
... More
Filling in plinth and floors / trenches with
contractor's murum for bedding in 15 cm to
20 cm layers including watering and
compaction, etc. complete. (Bd-A-11/263)
195.08
-
76.65
... More
Item no -7
-
-
-
... More
Lowering laying and jointing with SBR ruber gaskets
C.I. S/S pipes of various classes with CI / MS specials of
following diameter in proper position, grade and alignment
as directed by Engineer-in-charge including conveyance of
material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete.
Note : Only SBR Rubber gaskets to be used as per
IS-5382 and IS-12820.
-
-
-
... More
100 mm dia. DI K-7 pipes
1392
-
60.9
... More
150 mm dia. DI K-7 pipes
218
-
81.9
... More
200 mm dia. DI K-7 pipes
124
-
108.15
... More
Item no -8
-
-
-
... More
Hydraulic testing of C.I./D.I. pipe line to specified
pressure including cost of all materials and
labour and water for testing for specified length
including cutting, placing end cap making arrangement
for filling safe water using reciprocating
type pumps which should be able to provide
specified test pressure gauges and other
necessary equipments, labour, operation
charges, etc. required for testing. The rate under
this item shall also include cost of retesting,
if necessary and reinstating to original position
using water supplied by the contractor.
-
-
-
... More
without Rubber Ring
-
-
-
... More
100 mm dia. DI K-7 pipes
1.39
-
6828.15
... More
150 mm dia. DI K-7 pipes
0.22
-
9023.7
... More
200 mm dia. DI K-7 pipes
0.12
-
12071.85
... More
Item no -9
-
-
-
... More
Lowering, laying and jointing in position
following C.I.D/F Reflex valves, Butterfly
valves and Sluice valves including cost of
all labour jointing material, including nut bolts
and giving satisfactory hydraulic testing etc.
complete. (Rate for all class of valves.)
-
-
-
... More
100 mm dia. Sluice valve PN-1
4
-
2168.25
... More
150 mm dia. Sluice valve PN-1
4
-
3407.25
... More
200 mm dia. Sluice valve PN-1
4
-
3544.8
... More
Item no -10
-
-
-
... More
Providing and constructing B.B. masonry valve
chamber with 15 cm thick 1:3:6 proportion
PCC bedding, excluding excavation, B.B.
masonry in CM 1:5 proportion precast RCC
frame and cover, etc. complete as directed by
Engineer-in-charge.
chamber with 15 cm thick 1:3:6 proportion
PCC bedding, excluding excavation, B.B.
masonry in CM 1:5 proportion precast RCC
frame and cover, etc. complete as directed by
Engineer-in-charge.
-
-
-
... More
size 90x60
12
-
9851.1
... More
Item no -11
-
-
-
... More
Providing and laying in situ Cement
Concrete M-15 of trap/ granite / quartzite
/ gneiss metal for foundation and
bedding including bailing out water, form
work, compaction, curing, etc. complete.
(Cement 5.90 bags / cum)
Spec. No. - Bd E /1 Page No. 287
-
-
-
... More
P.C.C. M-150 (1:2:4)
265.16
-
5968.2
... More
Item no -12
-
-
-
... More
Providing and fixing in position steel bar
reinforcement of various diameters for
RCC piles, caps, footings, foundations,
slabs, beams, columns, canopies,
staircases, newels, chajjas, lintels,
pardies, copings, fins, arches, etc. as per
detailed designs, drawings and
schedules; including cutting, bending,
hooking the bars, binding with wires or
tack welding and supporting as required,
etc. complete (including cost of binding
wire). (Bd-F-17/306)
-
-
-
... More
Tor steel
0.31
-
66376.8
... More
Item no -13
-
-
-
... More
Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in
15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
951.64
-
76.65
... More
Total os s w no 7 Rs
-
-
-
... More
SUB WORK - NO 8: Misceleneous work
-
-
-
... More
Item No-1
-
-
-
... More
Providinganderecting1.5metrehighwirefencingwithsevenrowsofbarbedwiresupportedonM.S.Angles(50mmx50mmx6mm)at2.5Metres,Centertocenterincludingexcavatingpitsforfoundqtion,fixingpostincementcocnrete1:4:8ofsize45x45x45cmfasteningthewireandpaintingtheM.S.Angleswithonecoatofredleadprimerand two coats of painting etc.complete.
Bd.W.3 Page No.583Fencing
-
-
-
... More
fencing
94
-
751.8
... More
Item No-2
-
-
-
... More
Providingandfixing 50mm.dia.mediumclassG.I.pipegatewithwicketgateofapproveddrawingwithallfixturesandfittingsintwoleaveswithstrongholdfastembeddedinc.c.blockattopandbottomwithlockingarrangementincludingcutting,bending,makingholesandwith one coat of primer etc. complete.
-
-
-
... More
Gate
6.3
-
6128.85
... More
Item No-3
-
-
-
... More
Providingandfixingmildsteelgrillgateasperthedetaileddrawingincludinghinges,lockingarrangementsandpaintinginthreecoatsofoilpaintofapprovedcolourandshadeetc.complete.(weight18kg.to20 kg. Per Sq.m.)Spec.No.: As directed by Engineer- in-charge.
Spec. No. As directed byEngineer in charge.
-
-
-
... More
Wicket Gate
3.6
-
1605.45
... More
Item No-4
-
-
-
... More
Providing and laying in situ Cement
Concrete M-15 of trap/ granite / quartzite
/ gneiss metal for foundation and
bedding including bailing out water, form
work, compaction, curing, etc. complete.
(Cement 5.90 bags / cum)
Spec. No. - Bd E /1 Page No. 287
-
-
-
... More
P.C.C. M-150 (1:2:4)
253
-
5968.2
... More
Item No- 5
-
-
-
... More
ProvidingandfixingheavydutyinterlockingconcreteRubbermouldglossypavingblocksof80mmthicknessofhavingastrengthof400kg/Sq.cm.ofapprovedqualityandshapeonabedofcrushedsandof25to30mmthickincludingskirtingjointsandcleaningetc.complete.(using 100% crushed sand)
-
-
-
... More
Inter Locking Paver block 80 mm tk
1265
-
1303.05
... More
Item No. 6
-
-
-
... More
Providing and applying three coats of water plastic emulsion paint of approved manufacture and of approved colour to the plastered surface including scaffolding if necessary cleaning and preparing the surface , watering for two days complete.
90
-
197.4
... More
Item No. 7
-
-
-
... More
Providing and applying washable oil- bound distemper of approved colour and shade to old & new surface in two coats including scaffolding preparing the surface ( excluding the primer coat) complete.
75.09
-
41.48
... More
Item No. 8
-
-
-
... More
Providing and applying two coats of lead/ zinc base oil paint bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaining and preparing the surface.( excluding primer coat)
8.64
-
79.8
... More
Item No. 9
-
-
-
... More
Pushing of M.S. pipes of following dia
for road crossing and railway crossing
by push through method in all types of
strata by using hydraulic jack and
drilling machine of required diameter of
below M.S. casing pipes, lowering,
laying , jointing of material, required
welding machinery, tripod, shain -pulley
block crain, blower, compressor,
loading and unloading of machinery into
the trench, etc. transportation and
dewatering, etc complete, as directed
by engineer-in-charge but excluding the
cost of M.S. pipes.
64
-
26311.95
... More
Item No.10
-
-
-
... More
Providingandfixingboarddisplayinginformation,suchas'Nameofwork,Tendercost,NameofContractor,Workcompletionandliabilityperiodetc',havingrectangularshapeof1.20mx0.90msizemadeout18gauge(1.25mm)thickmildsteelsheetpaintedwithonecoatofZincchromatestovingprimerandtwocoatsofenamelpaintonfrontsideandgreystoveenamelonbacksideandborder/messages/symbolsetc.withapprovedcolourshadepaintcomplete,onM.S.angleofsize35x35x3mmframewithproperlycrossbracedM.S.anglesofsize35mmx35mmx3mmdulypaintedincludingTwoM.S.angleironpostsofsize65mmx65mmx6mm,3.65mlongpaintedwithalternateblackandwhitebandsof25cmwidthincludingallfixturesetc.andfixingtheboardsin1:4:8concreteblockofsize60cmx60cmx75cmincluding,excavation,refilling,transportation,andlabour etc complete. Spec. No. As directed by Engineer in Charge
1
-
8481.9
... More
Total of S W no 8 Rs
-
-
-
... More
SUB WORK - NO-9 : TRIAL RUN
-
-
-
... More
Item No.1 :- Commisioning, running and maintaining the scheme to quantites, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of one month for individual scheme , together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body/B.J. Medical college Sasoon Hospital Institute /PWD, after completion of the above period as directed by Engineer-in-charge.
-
-
-
... More
( Required chemicals to be supplied by Department of sasoon hospital free of cost and electricity bill will be paid by Sasoon Hospital B J Medical College or PWD Pune )
1
-
22399
... More
a) For single Village without WTP ( One Month)
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements