Water Resources Department Tender

Item No.4 :- Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) etc. complete.

Item No.5 :- Providing and applying white-wash in two coats on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.

Item No.6 :- Supplying hard murum/kankar at the road site, including conveying and stacking complete.

Item No.7 :- Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

Item No.8 :- Compacting the hard/ soft murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.

Item No.9 :- Executive's Table @ 1800Lx900Dx750HT Providing & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band as per drawing.

Item No.10 :- Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC/cementitious surface for terrace water proofing on B.B.Coba/R.C.C, after application of TP-42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM@700gms/One Square Metre and applying 2nd coat of Polydee-LM@700gms/One Square Metre and finishing the same with sprinkling the AG-10 granules on the wet coating.(After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @125gms/One Square Metre to be paid in separate item.) covering 7 years guarantee on Court Fee StampPaperof Rs. 100/- etc. complete.

Item No.11 :- Providing and applying external raincoat painting with crack filling acrylic polymer based chemical compound coating to the external surface of walls to prevent water seepage in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surface scrapping the existing loose old paint, removing loose particles of sand on the surface opening and cleaning the cracks developed in the external plaster, removing loose particles by chiseling, filling cracks by chemicals compound of approved make with proper penetration etc.Coating of Raincoat with the help of brush and as per instructions and specification given by manufacturer and within struction from Engineer in-charge.Work shall be executed by certified applicator only and covering gurantee of 3 years on court stamp paper of Rs.500/- and necessary testing etc. complete.

Item No.12 :- Providing and applying Bitumen VG30/VG40 layer at 2 Kilogram. Per One Square Meterr over the terrace, structural slab including cleaning the surface for water

Item No.13 :- Providing and fixing 40 mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

Item No.14 :- Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete

Item No.15 :- Providing and fixing barbed wire as directed by engineer in charge etc complete.

Item No.16 :- Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc.as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces etc.and including one coat of anticorrosive paintand over it two coats of oil painting of approved quality and shade etc.complete.

Item No.17 :- Providing,laying and fixing P.V.C. pipe of 110 mm.dia.with fittings such as bends, tees, reducers, clamps, etc.including necessary excavation, trench filling etc.complete.Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Item No.18 :- RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5"dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit upto 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.)including netlonmesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) me dia layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end-caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels.All material should be of approvedmake. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

Item No.19 :- Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no. WG-MA/BW

Item No.20 :- Supplying and erecting PVC trunking (PVC casing-n-capping) of size 20mm with accessories on wall/ceiling as per specification no. WG-MA/CON.

Item No.21 :- Supplying and erecting flush type shockproof plug socket 6A & 16A (6 pin) with 16A switch combined with indicator lamp and fuse with gang box on wooden board.

Item No.22 :- Supplying and erecting PVC Surface modular switch box with double mounting & front plate for 8 module complete duly connected.

Item No.23 :- Point wiring in for light/fan/bell in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire,flush type switch, earthing and required accessories as per specification no. WG-PW/SW

Item No.24 :- Wiring for plug on board with switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification no. WGPW/CW

Item No.25 :- Supplying & erecting ready to use Retrofit T8 LED, 18 / 20 watt tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary as per specification No. FG-LP/RET.

Item No.26 :- Supplying and erecting regular/ standard model ceiling fan of 1400mm. Sweep complete erected in position as per specification no. FG-FN/CF.

Item No.27 :- Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole/ bus bars or any other places as per specification no. WG-MA/BW

Item No.28 :- Supplying pedestal type air circulator 450 mm. sweep oscillating type suitable to work on 230 Volts 50 cycles 1440 RPM without speed regulator, metallic blades, overheat protection unit, totally enclosed, flame proof motor with additional 3 core wire, 5 metre length and hand shield type 3 pin 5A. plug top complete with moisture proof treatment and ‘E’ class insulation.