Water Resources Department Tender

iii)Wada KLS

iv)Puralgavbandh KLS

v)Damalemala KLS

vi)Naringre KLS

vii)Manche KLS

viii)Elaye Bhaskarwadi no.1 KLS

ix)Bagmala KLS

x)Phansewadi KLS

xi)Baparde KLS

Dewatering on BHP basis by using water pump including diversion of stream, providing coffer dams, earthern bunds etc. as may be necessary for foundation and parts of the the works and pumping out water during and after excavation as may be required by using 10.00 to 19.00 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

i)Kelaye KLS

ii)Pural Kothar KLS

iii)Wada KLS

iv)Puralgavbandh KLS

v)Damalemala KLS

vi)Naringre KLS

vii)Manche KLS

viii)Elaye Bhaskarwadi no.1 KLS

ix)Bagmala KLS

x)Phansewadi KLS

xi)Baparde KLS

Providing and fixing Polypropylene Glass Lined gate consisting of 4 mm thick M.S. sheet of high quality material welded properly on frame consisting of M.S.channel ISMC 150 x 75 to have zero leakage to which M.S.angles of size ISA 50 x 50 x 6 mm, 2 in nos.to be welded vertically and horizontaly ensuring further welding of hinges which will be hinged with M.S.Channel frame sized properly in size 100 X 50 mm, material of all above members should confirm IS 226 & iS 2062 and embedding whole assembly in the concrete by fasteners with skilled workmanship to facilitate the gate operation as per drawing provided. The entire fabrication surface should be smooth ened by sand blasting and then coated first by resin, followed by chopped strand mat to the entire assembly, applying resin on chopped strand PPGL mat, fixing chopped strand mat to the entire assembly for second time, applying resin on the chopped strand mat for second time, applying glass fiber tissue sheet on top surface covered with final coat of resin, curing the same for 2-3 days excluding transportation, etc., complete The gate shall withstand hydrostatic pressure of 4.5 m with adequate factor of safety.

i)Kelaye KLS

ii)Pural Kothar KLS

iii)Wada KLS

iv)Puralgavbandh KLS

v)Damalemala KLS

vi)Naringre KLS

vii)Manche KLS

viii)Elaye Bhaskarwadi no.1 KLS

ix)Bagmala KLS

x)Phansewadi KLS

Providing and fixing Polypropylene Glass Lined Gate consisting of 4 mm thick M.S. sheet of high quality material welded properly on frame consisting of M.S.chaneel ISMC 150 X 75 to have zero leakage to which M.S. angles of size 50 X 50 X 6, 2 in nos. to be welded vertically and horizontally ensuring further welding of hinges which will be hinged with M.S. channel members sized properly in size 100 X 50 mm, material of all above members should confirm IS226 & IS 2062 and embedding whole asssembly in the concrete by fasteners with skilled workmanship to facilitate the gate operation as per drawing provided. The entire fabrication surface should be smoothened by sand blasting and then coated by resin,followed by chopped strand PPGL mat, fixing chopped strand mat to the entire assenbly for second time,applying glass fibre tissue sheet on top surface covered with final coat of resin,curing the same for 2-3 days excluding transformation,etc., complete. The gate shall withstand hydrostatic pressure of 4.5m with adequate Factor of safety. (weight of 1sqm gate=161 Kg) (Rectangular Gate)

i)Baparde KLS