Water Resources Department Tender

Item No. 4: Providing and fixing anchor bar of 25 mm diameter 3.375 m length with resin bond cement capsule anchorage through adit / itself including drilling holes, inserting grout capsule, driving anchor, cost of all materials, machinery, labour, ventilation, lighting, drainage and other ancillary operations etc complete with all lifts as Directed .

Item No.5: Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all materials, labour,machinary ,hand packing / wedging stone chips, finishing etc.,complete with lead upto 1km and all lifts as directed. (available material)

Item No.6: Providing and laying in situ cement concrete of grade M-20 of trap / granite / gneiss / quartzite / graded metal for RCC works of abutment, wing walls, returns, transition walls, piers, columns, beams and slabs, diaphragm walls, road slabs trough (Box Culvert) trough for aqueduct, wearing coat, etc. . with Batching Plant and Transit mixerincluding centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts as directed. (a) M-20 (20 MSA) (Cement 6.60 bags/Cum) i) For Abutment, wing walls, returns, transition wall

Item No.7: Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete as directed.

Item No. 8: Providing and laying weep holes of 100mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete.

Item No. 9: Providing and guniting 25 mm thick in CM 1 : 3 (cement consumption 15.94 kg/sqm) pnumatically under pressure of 2.1 to 2.8 kg /Sq cm, with weld mesh 50 x 50 x 2.54 mm (13 gauge), after duly cleaning the surface by wire brushing, degreasing etc., including necessary admixtures (200 ml / bag of cement), curing, rehandling the pipe from fabrication shop to guniting place and from guniting place to laying location etc. complete with all lifts As Directed..

Item No. 10: Cutting down trees including cutting trunks & branches and stacking the material with all lift including uprooting and refilling the pit with material etc. complete as directed. (excluding extra material required for refilling) above 90 cm to 1.5 m. girth

Item No. 11: Providing and fixing canal information board of 1.2x0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x3 mm with cross bracing of size 25x25x3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border/letters/numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60x60x75 cm as directed.

Item No. 12: Quality control report - Cement

Item No. 12: Quality control report - Fine Aggregate

Item No. 12: Quality control report - Steel

Item No. 12: Quality control report - Concrete