Water Resources Department Tender
... More
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Water Resources Department - WRD Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date17 Mar 2025
Closing Date16 Apr 2025
Tender Amount₹ 5,83,72,730
AI Insights
Technical
Technical
Financial
Additional Eligibility
Technical Capacity
... View More
The required prior work experience for the bidder includes specific construction and contract management experience. The bidder must have completed similar contracts with a minimum average annual construction turnover of Rs. 7.78 Crore. For joint ventures, the lead partner must meet at least 25% of the requirement, and other partners must meet at least 50% of the requirement. The bidder must demonstrate experience in key activities, including construction, rehabilitation, or repairs of embankment, concrete dam, masonry dam, mechanical works, or any other civil work. The bidder should have successfully completed these activities in any one year of the last seven years. The bidder should also have experience in HM Works, specifically in repair and general maintenance of hydraulic Radial/Vertical gates and electrically operated Hoist in dams during the last seven years. The values mentioned include a minimum average annual construction turnover of Rs. 7.78 Crore, and the percentages mentioned include 25% and 50% participation for joint venture partners. The construction cash flow requirement is estimated as Rs. 1.63 crore for the subject contract(s) net of the Bidder’s other commitments. The bidder is allowed to subcontract up to 25% of the total contract amount. However, the exact value and percentage of similar works completed are not specified, but the bidder is required to submit a form (Form CCC) that includes information on their current contract commitments and works in progress.
Costs
EMD
₹ 2,92,000Document Cost
₹ 2,360Tender Fee
₹ 500
Summary
Civil Work Package Of Bhandardara Dam Dist Ahilyanagar Rehabilitation Improvement And Basic Facilities Of Bhandardara Dam In Ahilyanagar Dist Of Maharashtra Under Drip Ii
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_WRDNN_1160878_1Tender No
2025_AID_1001Tender Authority
Water Resources Department ViewPurchaser Address
-Website
http://https://wrd.maharashtra.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Item No.4:- Providing and laying in situ cement concrete of grade M-20 of trap / granite / gneiss / quartzite / graded metal for RCC works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments, slab etc. with Batching Plant and Transit mixer including centering, shuttering, scaffolding, compacting, curing etc. complete with all lifts etc.complete as directed.
266.4
-
-
... More
Item No.5:-Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete as directed.
2.16
-
-
... More
Item No.6:-Royalty Charges as per Revenue and Forest Departments Gazette No.146 Dt. 04 June 2021 and as per instruction in general notes on SSR 2021-22 vide Sr No v. on Page 5 of P.W.D
359.64
-
-
... More
Removing old damaged wire rope from gate leaf and fitting new wire rope 36mm dia 6x36 constructios made from galvanised,FMC core confirm to I.S.2266/1970 for one gate, with zink pouring in the socket and new socket with labour charges.
2
-
-
... More
Removing of old turn buckle assey & providing and erection of new turn buckle assey for 42 Ton Hoist cap.
2
-
-
... More
Replalcing of side & bottom rubber seal by way of removing old rubber seal, broken nut & bolts etc.
2
-
-
... More
Surface preparation and applying zinc phosphate epoxy primer and applying black coal tar epoxy paint in double coats to u/s side of radial gate and applying anticorrosive coal tar black paint to d/s side of radial gate 12x8 mtr complete job.
2
-
-
... More
Complete overhauling to drive unit by way of servicing to reduction gear box by servicing input,output bearings,changing gear oil,replacing brakes with new one,replacing flexible coupling bolts, rubber bush,muff coupling nut and bolts, greasing to gear drum and gear train,overhauling bearings,10 HP motors etc.
2
-
-
... More
Supplying, assembling/Erecting and commisioning Water lubrication System for Radial Gate - 12X8m- 2Nos
1
-
-
... More
Rate Analysis for Ladder Arrangement at various locations near radial gates,valves, manufacturing new cover plates for end arm pin of radial gate 12x8, 2nos.
1
-
-
... More
Fabrication & Erection Of sheet metal work in CRCA sheet, for Protective cabin size 30 x 4 and 4 mtr height(for radial gate hoists) & including cutting ,bending, drilling , welding,treated with anticorossive treatment and painted with one coat of Red lead paint and two coats of enamel paints
1
-
-
... More
Item No.1- Dismantling of existing B.T.Surface (flexiblePavement) to a depth of 50mm.manually including loading of dismantled material to transport vehicle at site excluding lead charges
6770
-
-
... More
Item No.2- Prime coat-Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including cleaning of road surface and spraying, primer at the rate of 0.60 Kilogram/Square Metre using mechanical means.
6770
-
-
... More
Item No. 3 - Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 100% crusher broken metal with conical crusher plant, heating and spraying the bitumen of VG-30 grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. including applying tack coat of specified grade of bitumen at the rate of 0.30 Kilogram / Square Metre.on existing bitumen surface. (VG-30 bulk bitumen rates are considered to arrive at rates)
6770
-
-
... More
Item No. 4 - Open Graded Premix Surfacing-Providing and Laying OGC 20 mm thickness composed of 13.2mm to 5.6mm aggregates premixed with bituminous binder transported to site with VTS ,laid over a previously prepared surface,finished to the required grade,level,alignment,and rolling to achieve the desired compaction but excluding prime/tack and Seal coat.For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA ,Paver and Vibratory roller (over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates)
6770
-
-
... More
Item No. 5 - Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates)
6770
-
-
... More
Item No. 6 - Picking the road surface including sectioning etc. complete (WBM surface.)
5110
-
-
... More
Item No. 7- Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface,mixing by mix in place method with rotavator at OMC,and compacting with vibratory roller to achieve the desired density ,complete as per clause 401 -- Plant Mix Method and Grading - I Material
511
-
-
... More
Item No. 8 -Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of subgrade surface if required etc. complete.
511
-
-
... More
Item No. 9 -Providing and laying in situ cement concrete M-30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen (excluding reinforcement ) with coarse and fine aggregate (VSI grade finely washed crushed sand ) etc. complete
903
-
-
... More
Item No. 10 - Providing and fixing in position TMT FE 500, 25 mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete.
4212
-
-
... More
Item No. 11 - Supplying hard murum/ kankar at the road site, including conveying and stacking complete.
774
-
-
... More
Item No. 12 - Spreading hard murum/ soft murrum/ gravel or kankar for side width complete
774
-
-
... More
Item No.13 : - Royalty Charges as per Revenue and Forest Departments Gazette No.146 Dt. 04 June 2021 and as per instruction in general notes on SSR 2021-22 vide Sr No v. on Page 5 of P.W.D
774
-
-
... More
Excavation in hard murum including boulders upto 0.6 m diameter ( 0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuffneatly in dump area or for formation of service road / embankment including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead upto 1 km and all lifts as directed.
151.24
-
-
... More
Excavation in soft rock without blasting including boulders upto 0.6 m diameter ( 0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. complete with lead upto 1 km and all lifts as directed.
160.92
-
-
... More
Excavation in hard rock of all toughness by breaker including boulders above 0.6 m dia.(0.113Cum) minimising damage to side slopes of excavation in water prism area by adopting any one or combination of line drilling /pre-splitting /smooth blasting techniques and placing the excavated rock neatly in approved dump area including cost of all materials, machinery, labour,levelling bed etc., complete with all lead & lift etc complete
159.97
-
-
... More
Providing and fixing anchor bar of 25 mm diameter 1.5 m with resin bond cement capsule anchorage through shaft including drilling holes, inserting grout capsule, driving anchor, cost of all materials, machinery, labour, ventilation, lighting, drainage and other ancillary operations etc complete with all lifts as Directed .
282
-
-
... More
Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss quartzite / graded metal for foundation and bedding with Batching Plant and Transit Mixer including placing, compacting, curingetc. complete with all lifts as directed.
69.58
-
-
... More
Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C.pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc.as per detailed designs,drawings and schedules. including cutting, bending, hooking the bars,binding with wires or tack welding and supporting as required complete as directed.
42.64
-
-
... More
Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for .C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
149.1
-
-
... More
Providing and laying in situ cement concrete of grade M-20 of trap / granite / gneiss / quartzite / graded metal for RCC works of abutment, wing walls, returns, transition walls, piers, columns, beams and slabs, diaphram walls, road slabs trough (Box Culvert) trough for aqueduct, wearing coat, etc. . with Batching Plant and Transit mixer including shuttering, scaffolding, placing, compacting, curing etc. complete with an initial lead of 1 km and all lifts as directed.
434.91
-
-
... More
Providing and laying in situ cement concrete of grade M-20 of trap / granite / gneiss / quartzite / graded metal for RCC works of abutment, wing walls, returns, transition walls, piers, columns, beams and slabs, diaphram walls, road slabs trough (Box Culvert) trough for aqueduct, wearing coat, etc. . with Batching Plant and Transit mixer including shuttering, scaffolding, placing, compacting, curing etc. complete with an initial lead of 1 km and all lifts as directed.
155.75
-
-
... More
Providing and applying two coat of water based cement paint to un plastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence etc. complete. (applying 1 litre paint on 2 One Square Metret)
5880
-
-
... More
Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm dia G.I. pipe ( Rezan/ concentina ire 0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete.
1400
-
-
... More
Providing and erecting chain link fencing 1.6M. height with G.I.chain link of size 50x50mm, 8 gauge thick and fixed 75mm above ground level on vertica lM.S.Angles of 40x40x6mm size,includind excavating pits for foundation and embedded in C.C.block of 1:4:8 mix of size 450x450x670mm.at1.75 M.c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S.Angles at top and bottom of 25x25x5mm size and vertical M.S.flat 35x5mm and 25x5 mm horizontal including cross support of 40x40x6mm angles both side at every corner or bend embedded in concrete blocks of1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.
400
-
-
... More
Provision of Royalty Charges (Separate Item)
891.33
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%