Vidharbha Konkan Gramin Bank Tender

FULL HEIGHT GLAZED PARTITIONS (Mngr + front partition) Providing & Fixing partly glazed and partly paneled partitions as per drawing and as directed by the Architect. (Glazed portion at required places) as per design and drawing made out of aluminum section frame work of size 40x40mm @600 mm c/c covered with 9 mm Ply boards as per drawings. The door will be provided with T.W. louvers finished in melamine polish of matching laminate colour. The doors are also to be provided with Godrej Night Latch Two wooden trays are also to be provided as per drawing. Necessary cutouts to provide in the glass and the edges of the glass cutouts are to be finished in mirror polish. , preservative paintetc. as per list of approved material and as approved by the Project Consultant / Bank complete in all respects.

FULL HEIGHT PARTITIONS Providing & Fixing partly glazed and partly paneled partitions as per drawing and as directed by the Architect. (Glazed portion at required places) as per design and drawing made out of aluminum section frame work of size 40x40mm @600 mm c/c covered with 12 mm Bison boards as per drawings. The door will be provided with T.W. louvers finished in melamine polish of matching laminate colour. The doors are also to be provided with Godrej Night Latch Two wooden trays are also to be provided as per drawing. Necessary cutouts to provide in the glass and the edges of the glass cutouts are to be finished in mirror polish. , preservative paint etc. as per list of approved material and as approved by the Project Consultant / Bank complete in all respects.

Cash Counter Providing and fixing in position Cash Counter 2’-3” wide as per specified drawing comprising of the following: Working top made with 25mm thick plywood finished with 1mm thick laminate. Outside edge of the working top shall be provided with 1 ¼”X1” Teak Wood moulding finished with melamine polish. Inside edge will be provided with ½”X1” T.W. beading patti with melamine polish.

P & F wall panelling in manager's cabin out of grid 18mm ply @ 2ft c/c covered with 12mm laminate as per drawing & design, etc.complete to the satisfaction of Architect/Bank

Cash Cabin Partition Providing and fixing in position 7' high partly glazed partition for Cash Cabins including door in frame work at 2' x 2' grid (horizontally and vertically) comprising of 2" x 1½" T.W. Section and /or as per frame work shown in the drawings with 6 mm plywood on both sides finished with 1 mm thick laminates of approved shade and colour as shown in drawings. Item to include 8 mm thick glass with etching and frosting as per design and 2' x 2" T.W. member for door sides and glass sides and T.W. door frame to take 8 mm thick with etching and frosting.

Aluminium Ladder having 5 steps

Providing and fixing as per approved make 100 mm wide vertical fabric blinds complete with handling chain, sliding & tilting system in drawn position, fabric vanes to overlap by minimum 10 mm (every 1 m. length to have at least 12 Nos. 100 mm wide fabric- vanes).Length of blinds bottom end to be at least 12 mm from horizontal surface fabric strip as that of fabric vanes, to be fixed on both sides on aluminium top channel. Lower end of vanes to be weighed down & tight with each other on both corners with ball chains. Items to be completed in all respects including fixing with brackets on wall or partition with rawl plugs.

Providing & fixing Lockable Notice Boards 900 x 750 mm size x 50mm deep, made up of 12 mm soft board fully covered by approved colour upholstery & fixed on 12 mm commercial ply backing & with side-hung double-leaf shutters out of 18mm thk. Comm.ply having cut-out for 4mm thk. Clear glass fixed with required size T.W beading including three coats of French polish of approved shade to T.W. beading and necessary locks, hinges, fixtures & fastenings etc. complete.

False Ceiling Gypsum Boards 12mm thick as per drawing & detailings.

Manager’s Table Exe. Table of size 5’6”x3'0”x2’6” Height P & F exe. Table as follows. BASE: 3” high skirting of size 6’-0” x 2’-6” out of 18mm ply. & 1mm laminate on all exposed sides. Supports:- 36mm ply.2’3” x 2’1.5” size in the sides. Front:- 18mm ply in facia of size 6’6” x 1’6” with a gap at bottom and all covered with covered with 1mm laminate as per design TOP: 36mm ply. With 1mm laminate (of approved shade & color ) including T.W beading of appropriate size & design. GLASS : 12 mm thick glass including beveling, machine polished to the edges, frosting, protruding 50mm from all the sides of the 36mm top ply & laminate surface Hafele cable manager SIDE RUNNER ; 3’0”x 1’6” x 2’3” ht DRAWER UNITS (2 NO.S); of size 450 x 450 x 150 mm top drawer & high movable on castor wheels out of 18 mm thick plywood with 2 equal open able drawer’s on telescopic channels including T.W.beadings,200 mm long brush finished S.S. handles for each drawer ( basic cost 125/-for each handle) finished from inside with 3 coats of tractor emulsion oil paint, beadings to be melamine polished, , item to be executed as per the directions of the Architect. NOTE: Footrest shall be provided and movable c.p.u unit.

Officer’s Table Exe. Table of size 5’0” x 2’6” x 2’6” Height P & F exe. Table as follows. BASE: out of 18 mm ply covered with 1mm laminate on top including openings of size 150 x 150 in the front surface 6 nos. finished with T.W. beading 25 x 12.5 including polisher as directed by Ar. TOP : Out of 25 mm ply covered with 1 mm laminate & supported by 36mm thick & 50mm deep plywood in the center & at the end as shown in the plan GLASS : 12 mm thick glass including beveling, machine polished to the edges, frosting, protruding 50mm from all the sides of the 25mm top RUNNER WITH DRAWER UNITS ( 2 NO.S); of size 600 x 600 x 675 mm high movable on castor wheels out of 18 mm thick plywood with 3 equal open able drawer’s on telescopic channels including T.W.beadings,200 mm long brush finished S.S. handles finished from inside with 3 coats of tractor emulsion oil paint, beadings to be polished, item to be executed as per the directions of the Architect.

HALF HEIGHT PARTLY GLAZED PARTITION Providing & Fixing partly glazed and partly paneled partitions for Hall as per drawing and as directed by the Architect. as per design and drawing made out of aluminum section frame work of size 40x40mm @400 mm c/c covered with 9mm ply (303) with 1mm laminate on both sides as per drawings. Glass on top part 12” in SS “D” brackets 4 No.s with solid partition 3’6”. Wicket gate open able inside will be 3’0” wide & of the same height as that of the partition without glass.

FOC - Providing and fixing in position FOC 2’-3” wide as per specified drawing comprising of the following:Working top made with 25mm thick plywood finished with 1mm thick laminate. Outside edge of the working top shall be provided with 1 ¼”X1” Teak Wood moulding finished with melamine polish. Inside edge will be provided with ½”X1”T.W. beading patti with melamine polish.

P & F Tilting, revolving chair, for Staff with back, PU arms, MS/Nylon body 5 legged with good finishing, cushion at back & seat as approved by BM.

P & F Tilting, revolving High back chair, for Manager, PU arms, MS/Nylon body 5 legged with good finishing, cushion at back & seat

P & F visitors chair in M.S Stand with cushion on seat & back “S” type, (Manager's cabin) as per the selection by bank.

Writing Table cum suggestion box as per standard drawings

Providing full height Storage File cabinets out of'18 mm ply & 1mm laminate in stores of size 8'7”x 7'0” ht 16” deep .Shelves out of 18 mm ply 5 no.s to be equally divided min ht. 13” ,all exposed surfaces to be covered with 0.8mm white laminate &T.W. beadings of appropriate sizes for shutters mellamine polished ,with lockable arrangements. The size of the shutter shall not be more than 16” but shall be equally distributed.

Providing half height Storage File cabinets out of'18 mm ply & 1mm laminate in stores of size 8'7”x 7'0” ht 16” deep .Shelves out of 18 mm ply 5 no.s to be equally divided min ht. 13” ,all exposed surfaces to be covered with 0.8mm white laminate &T.W. beadings of appropriate sizes for shutters mellamine polished ,with lockable arrangements. The size of the shutter shall not be more than 16” but shall be equally distributed.

P & F UPS partitions out of aluminium frame @600 c/c with 12 mm ply on one side & Bison sheet 18 mm on internal surface, to be covered with paint while the ply has to be covered with matching 1mm laminate with 3'0" wide door etc. complete.

UPS battery stand for keeping 3 Shelves of standard dimention,with appropiate angle MS sections, to carry the load of batteries etc,.Complete Approx. Weight of Stand to be 150 Kgs.

P & F heavy quality door step green mat of size 6’0” x 2’6” (approximate) as per requirement and selection of bank with black colour rubber backing (ready made preferred)

P & Keeping 3 Seater M.S Perforated sofa set black powder coated.

Column paneling out of 18 mm ply & 1mm laminate as per design,

Coloring to walls and ceiling