Tourism And Cultural Affairs Department Tender

Item No. 3 Scraping out old white wash/ colour wash/fungus with Patch repairs, washing & cleaning surfaces to get original facing by using scaffolding including leads, lifts etc complete

Item No. 4 Washing and cleaning of decorated wall surfaces with soap, soda and water etc. complete. (including water charges & scaffolding charges)

Item No. 5 Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts etc.

Item No. 6 Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc. complete (ift above 3 m)

Item No. 7 Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. (Including scaffolding)

Item No.8 Numbering of existing stones masonry including lifting, stones manually and striking lowering stone in proper order, as directed by engineer incharge etc complete (Including scaffolding)

Item No. 9 Lowering stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts etc

Item No. 10 Removal of telephone / Electric poles including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to a lead of 1000 metres and stacking the serviceable and unserviceable material separately

Item No. 11 Removing iron pipe raling having wooden R.C.C. or C.C. or iron post and stacking the materials as directed etc complete.

Item No. 12 A Providing Chemical treatment to God Idol Kewal Narsimha

Item No. 12 B Removal of Dust, and Cleaning the Inscription on the wall surface of Kewal Temple.

Item No. 13 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building are a and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc, complete. (Lift upto 1.50 m) By Manual Means

Item No. 14 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, reparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc complete (lift upto 1.5m) By Mechanical Mean

Item No. 15 Providing and casting in situ 1:2:4 lime concrete of aggregate/metal for foundation and bedding including dewatering and curing, complete (Excluding reinforcement) (Including formwork if necessary)

Item No. 16 Providing and grouting with lime and fine screened sand slurry in proportion of (1:1) with a proper jet pump pressure including cleaning and washing and packing the existing cracks/holes in the stone masonary with lime and fine sand paste in proportion of (1:1) property from down side, filling the slurry in cracks of hole including all necessory material of as per requirement to reduce the porosity of concrete/ Masonry structure and to increase the strength of structure using grouting pipes, grouting m/c, mixer etc and all relevant safety with all leads and lifts, material, machinery, labour, etc. Completeas pes specification and as directed by Engineer-in-Charge.

Item No. 17 Providing and Applying chemical conservaton by an Impregnating Sealer such as SS-ProtectoSeal SB-Protecto Seal WB for Hydrophobic Sealing of Natural Stone Surfaces from water, stains, wear biological growth, Environmental pollution and weathering Apllication should be on the complete dried substract. The selected material is based on selected silane/siloxone technology. The material should preserve natural look of the stone substate Comsumption at least 200 grams/Sqm. (Including Scaffolding) (Note: The measurements will be considered as plain surface)

Item No. 18 Providing and constructing Red trap Ashlar facing rough tooled dressed stone masonry of trap stones in lime mortar 1:1.5 in superstructure, watering scaffolding complete.

Item No. 19 Providing and laying water proof treatment of terrace slab with B. B. Coba in all position with an average thickness of 150 mm consisting specialised material as per the manufactures specifications and covering 10 year guarantee on court fe stamp paper including all lead, lift, etc complete

Item No. 20 A Providing and constructing Red Trap Ashlar facing rough tooled dressed stone masonry of trap stones in lime mortar 1:1.5 in plinth & superstrucure with setting stainless steel dowels pins fixing with araldite & hardner including racking out joints watering curing etc. complete with pointing (including crane with driver if necessary) (including heighted work above 3 m) (For MASONARY in new stone size 0.6 x 0.45 x 0.3 m)

Item No. 20 B Providing and constructing Red trap Ashlar facing rough tooled dressed stone masonry of trap stones in lime mortar 1:1.5 in plinth & superstrucure with setting stainless steel dowels pins fixing with araldite & hardner including racking out joints watering curing etc. complete with pointing (including crane with driver if necessary) (including heighted work above 3 m) (For PARAPET in new stone size 0.30 x 0.30 x 0.3 m)

Item No. 20 C Providing and fixing sculpture, decorated and ornamental design as per original shape and size on Red Trap Ashlar fine tooled dressed and carved stone masonry, column, Beams, Chajja, Cap Stone in lime mortar 1:1 properly to the right place with the help of all necessary tools and tackles and machineries, Including setting with stainless steel dowels, pins and fixing with Araldite and curing etc. complete (Including crane with diver if necessary) (including heighted work above 3 m) (For BLOCK IN COURSE in new stone size 0.6 x 0.5 x 0.3 m)

Item No. 20 D Providing and constructing Red trap Ashlar facing rough tooled dressed stone masonry of trap stones in lime mortar 1:1.5 in Water & superstrucure with setting stainless steel dowenshol edinessed aridite & hardner including racking outove 3 (For STEPSing etc complete with pointing (including alanine thing with necessary) (including heighted work above 3 m) in new Stone Size 1 x 0.35 x 0.30 m)

Item No. 20 E Providing and constructing Red trap Ashlar facing rough tooled dressed stone masonry of trap stones in lime mortar 1:1.5 in plinth & superstrucure with setting stainless steel dowels pins fixing with araldite & hardner including racking out joints watering curing etc. complete with pointing (including crane with driver if necessary) (including heighted work above 3 m) (For MASONARY SURFACE in new stone size 0.45 x 0.30 x 0.20 m)

Item No. 20 F Providing and fixing sculpture, decorated and omamental design as per original shape and size on Red Trap Ashlar fine tooled dressed and carved stone masonry, column, Beams, Chajja, Cap Stone in lime mortar 1:1 properly to the right place with the help of all necessary tools and tackles and machineries, including setting with stainless steel dowels, pins and fixing with Araldite and curing etc. complete (Including crane with diver if necessary) (including heighted work above 3 m) (For CHAJJA in new stone size 0.75 x 0.75 x 0.1 m)

Item No. 20 G Providing and constructing Red Trap Ashlar facing rough tooled dressed stone masonry with REUSED trap stones in lime mortar 1:1,5 in plinth & superstrucure with setting stainless steel dowels pins foxing with araldite & hardner including racking out joints watering curing etc. complete with pointing (including crane with driver if necessary) (including heighted work above 3 m) (For MASONARY in Reused stone size 0.6 x 0.45 x 0.3 m)

Item No. 20 H Providing and constructing Red trap Ashlar facing rough tooled dressed stone masonry with REUSED trap stones in lime mortar 1:1.5 in plinth & superstrucure with setting stainless steel dowels pins fixing with araldite & hardner including racking out joints watering curing etc. complete with pointing (including crane with driver if necessary) (including heighted work above 3 m) (For PARAPET with Reused stone size 0.30 x 0.30 x 0.30 m.

Item No. 20 I Providing and fixing sculpture, decorated and ornamental design as per original shape and size with REUSED Red Trap Ashlar fine tooled dressed and carved stone masonry, column, Beams, Chajja, Cap Stone in lime mortar 1:1 properly to the right place with the help of all necessary tools and tackles and machineries, including setting with stainless steel dowels, pins and fixing with Araldite and curing etc. complete (Including crane with diver if necessary) (including heighted work above 3 m) (For CHAJJA with Reused stone size 0.75 x 0.75 x 0.1 m)

Item No. 21 Providing and laying trap stone fine tooled dressed stone pavement (with stone size 0.45 x 0.45 x 0.2 m) plinth protection with trap stones members in lime mortar 1:1.5 properly to the right place, with the help of all required and necessary tools and tackles and machineries with all lead and lift, as directed by engineer in charge etc.complete.

Item No. 22 Providing and fixing 1.37m x 1.06m, Granite plate of thickness 20-25mm, engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete

Item No. 23A Carving ornamental work on Stone surfaces, including moulding, grooving the same part with fine finishing as per existing/ similar type of work on the stone surface of any type & size or as directed by engineer in charge etc. complete. including Labour charges for Carving work, etc. For Carving Ornamental Design work on Stone Surfaces (including molding).

Item No. 23B Carving ornamental work on Stone surfaces, including moulding, grooving the same part with fine finishing as per existing/similar type of work on the stone surface of any type & size or as directed by engineer in charge etc. complete. including Labour charges for Carving work, etc. For Cutting, Grooving and Moulding work on stone,

Item No. 24 Providing and fixing mild steel grill gate with angle iron frame 65 mm x 65mm x 10mm with iron bars at 150 mmC/C and diagonal flats as per the detailed drawing or as directed by engineer incharge including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kg/Sqm.

Item No. 25 Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete

Item No. 26 Providing and fixing partition of welded mesh of 3 mm dia. Wires 50 mm x 25 mm size mesh including integrated non teak seasoned wood frame 80x50 mm of vertical and horizontal scantling and finishing with oil painting 3 coats etc. complete

Item No. 27 Providing Stucco (Art work) lime plaster 20mm thick in single coat in lime mortar 1:1 stone or brick surface in all position including scaffolding (for above 3m heighted work) and curing complete

Item No. 28 Providing pointing to stone masonary surface in lime mortar 1:1 in all position including racking joints and curing.Scaffolding (for above 3 m heighted work) etc comlete.

Item No. 29 Disposing off/Dismantelled material of stone masonary/brick masonary/concrete debries/excavated material/soil murum/ rubish material or vegetation/grass/shrubs etc from site to 5 Km (including conveying material upto 50 m by head load), as directed by Engineer Incharge

Item No. 30 Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9square meter made out of 2 mm aluminum sheet bonded with white retro reflective sheeting of Class B (Type IV Highintensity micro-prismatic grade sheeting-HIP) having pressure sensitive heat activated adhesive retoreflective specified background, border and back side retorefictive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supportedwith back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint andsupported on one Number mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt North & South firmly fixed to the groundby means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below groundlevel as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats ofepoxy finish paints having alternate black and white bands of 25 cm width including Gl fixures and transportationetc.complete. The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded.Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty. a.) 2mm aluminium sheet class B

Item No. 31Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 600 mm made out of 1.5 mm aluminum sheet bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retorefictive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m North & South, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor / Supplier. a) 600 mm made out of 1.5 mm Aluminium Sheet.

Item No. 32 Carying out structural audit of the structure with help of non destructive testing (NDT) equipment etc complete.

Item No. 33 Co-ordinator for Archaeological Documentation Work: Archaeological Documentation of all the monument premises parts. fixed and loose sculptures, antiquites, pottery, paintings, manuscripts, and all other ancient art objects located within premises. It would further requires correlating the same with history of monument and the region, which would help in building and showcasing art remains, the work would involve thorogh archaeological exploration and survey on individual capacity, with the technical report prepared in prescribed digitalized format etc. complete

Item No. 34 Providing senior surveyor/ Research assistant/ architect for preparation of existing/ proposed drawings and giving markout on site as per direction of Engineer in Charge/ ADA

Item No. 35 Book designing, Publishing and printing: The work involves printing of a book/ guide book on the fort/ Monument and itsvarious aspects, which would provide authentic and precise tourism oriented information. This work involves important photographs of the site, art object. Antiqquites, inscription etc. ehich would be useful for educating the masses of the rich culture heritage of the site, region and state, providing 100 pages coloured book as directed by Engineer in charge/ADA

Item No. 36 Preparing and carrying out videography. Documentary & Shooting of still photography of extra copies 5"x7" size outdoor and indoor of roads, bridges other structures and programme including preliminary survey still shots moving shooting, necessary boards for video shooting hiring of vehicle, equipments for video shooting transportation of all equipments, persons, required for shooting, lightning arrangements as necessary editing, mixing, titiing lettering, sounding including cost of coloured casette of approved quality etc complete