Tata Memorial Centre Tender

Only removing door frame ( Toilet)LABOUR FOR FIXING FLUSH SHUTTERSLabour charge only for removing & re-fixing available door shutter with necessary modification including cutting the existing shutter providing leaping Patti all around the shutter if required including removing & refaxing available old hinges, mortice lock, tower bolts etc. fixing aligning the door shutter IN proper plumb and level etc. complete all as per specified and directed by Engineer-In-Charge

Removing only door / shutter window LABOUR FOR FIXING FLUSH SHUTTERSLabour charge only for removing & re-fixing available door shutter with necessary modification including cutting the existing shutter providing leaping Patti all around the shutter if required including removing & refixing available old hinges, mortice lock, tower bolts ect. fixing aligning the door shutter IN proper plumb and level etc. complete all as per specified and directed by Engineer-In-Charge

Removing windows with shutters all sizes. LABOUR FOR FIXING FLUSH SHUTTERSLabour charge only for removing & re-fixing available door shutter with necessary modification including cutting the existing shutter providing leeping patti all around the shutter if required including removing & refixing available old hinges, mortice lock, tower bolts ect. fixing aligning the door shutter IN proper plumb and level etc. complete all as per specified and directed by Engineer-In-Charge

Removing of Existing false ceiling & Existing AC duct (if any) and stacking the serviceable material as directed by EIC.

Size of tile 60x60 cm (2' x 2') (joint free)VETRIFIED DADO/ FLOOR TILES Providing & laying polished vitrified floor tiles in different sizes (thickness to be specified by manufacturer) with water resistant less than 0.08% and confirming to IS 15622 of approved make in all colours & shades, laid on 20mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Using teak veener. VENEER Providing and fixing commercial or marine ply/teak veneer 4 /3mm thick of approved make and quality including cutting to required Size and fixing the same with approved Synthetic resin adhesive with necessary Panel pins nails, screws, wastage in cutting Transportation etc. complete as directed by The engineer in charge

CUDDAPAH Providing & laying 20-35mm thick cuddaph stone slabs in platforms/sinks with all exposed edges machine cut double machine polished in true plane and level with matching cement paste curing finishing the joints neat etc. complete including making grooves in walls for fixing and making good the surfaces.

Area of slab over 0.50 sqm GRANITE: Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Openable glass window shutter with powder coating/anodized ALUMINUM OPENABLE WINDOWS Providing & fixing in position aluminum openable Sqm 2014 window shutter with frame fully glazed / aluminum grills with using 5.5mm thick glass sheet of approved make and quality plain / frosted / bajari glass of approved make Triveni / Shri Vallabh /J / A/ G/ pilkinten fixed with aluminum beeding channels with two way rubber gasket / PVC lining to ensure water tightness and Nos rattling for aluminum grill fixing with Fchannel beeding using satin finish aNosdized 15 micron jindaL sections for shutters and frame of required size and section including using aluminum / S.S. hinges of required size of Archies make, tower bolt of required size of Archies make , C type alum handle for shutter of Archies make and other necessary hardware as per requirement etc. complete all as per specified and directed by Engineer in charge.

Alumn. Sliding window with powder coated/anodized ALUMINUM OPENABLE WINDOWS Providing & fixing in position aluminium openable Sqm 2014 window shutter with frame fully glazed / aluminum grills with using 5.5mm thick glass sheet of approved make and quality plain / frusted / bajari glass of approved make Triveni / Shri Vallabh /J / A/ G/ pilkinten fixed with aluminum beeding channels with two way rubber gasket / PVC lining to ensure water tightness and Nos rattling for aluminum grill fixing with Fchannel beeding using satin finish aNosdized 15 micron jindaL sections for shutters and frame of required size and section including using aluminium / S.S. hinges of required size of Archies make, tower bolt of required size of Archies make , C type alum handle for shutter of Archies make and other necessary hardware as per requirement etc. complete all as per specified and directed by Engineer in charge.

Providing and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, including tower bolt, SS grab handle,good quality aldrops and all necessary fittings complete as per direction of Engineer-in-charge.

ALUMINIUM LOUVERS: Providing & fixing in position aluminum adjustable louvers glazing etc. with extruded and integrateda No. dized (15 micron) aluminum section manufacture dtorelevant I.S. standards specifications and glazing with Frosted/Bajri glass, aluminum beading,PVC lining,brass cadium plated Screws, mastic filling with strips, nuts, washers etc. fixed on plastered surfaces.

600mm x 450mm MIRROR:Providing & fixing in position 25mm wide beveled mirror/ghost free image made out of best Indian glass 5.5mm thick of approved make, copper coated mounted on 4mm Marine ply fixed in position with 4 Nos. of C.P. brass screws or corner brackets with detachable C.P. brass caps, wall mounting arrangements washers raw plugs etc complete of following sizes and as directed by the Engineer-In- Charge.

Size of sinks 600*450*200mmKITCHEN SINK: Providing and fixing best quality kitchen sink of hindware make no. 50002 sinck comprising best quality white glazed vitreous chinaware fire clay kitchen sinks of size mentioned below with integral overflow weir at end supported on pair of white enamel painted C.P brackets. One number suitable CP Brass waste coupling heavy quality with rubber plug and CP Chain. One number suitable size heavy quality CP brass bottle trap with extension piece and wall flange.

ARC make central hole basin mixer (Swan model)MIXER:Removing the existing mixer and fixing, new mixer Hot & Cold including C.P. connector with brass nuts complete for basin/shower assembly complete set etc. including commissioning and testing for leakage as required at site and as directed by the Engineer-in-Charge.B576

450 mm long HARDWARE FIXTURES Removing existing hinges if necessary and Providing fixing approved brass cpxidized/ S.S.heavy duty railway type/flat//butt type hinges (heavy duty) minium thickness of 5mm at the required Flora/Pooja Mark /Shreeji/Garg/Atul minimum thickness 5mm at the required location with all screws making grooves in the door shutter & frame as required etc. complete.

Making new Gypsum board false ceiling with frame work GYPSUM BOARD : 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 amand the side borders of 30 mm, backed with non-woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of Aluminum sheet having electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Electrical Work

Supply and fixing of 3W / 5W LED decorative Spot light led for fixing in ceiling concealed type round shape

Supply and fixing of 9W recessed mounted LED lighting fixture round, decorative type

Supply and fixing of 5W LED strip light with Aluminum profile and as directed by EIC (pre-approved sample)

Driver for LED strip lights

Supply and fixing of 18W / 20W recessed mounted LED lighting fixture round, decorative type including fixing accessories

Providing and fixing of modern LED Pendent lights (sets of 2 nos. types) and as directed by architect and EIC (pre-approved sample) including fixing accessories

Supply & fixing of decorative/ premium LED light for Mirrors (2 nos.) as per actual size of mirror /site requirements as directed by Architect and EIC (pre-approved sample) including fixing accessories

Decorative Fan and Accessories

SITC of 1200mm size BLDC Ceiling Fan remote operated decorative & designer fan as per requirement including down rod, double ball baring, decorative, with D-hook & all fixing accessories etc. and all as per instructions and as directed by E-I-C, ES. In case of replacement old/removed item shall be returned to E-I-C, ES as it is.

Supply & fixing of Ceiling fan regulator/ dimmer (400/ 600W) modular type

Supply & fixing of 1 phase modern type PVC body ex-fan (225mm) with louvers, 1400 RPM, 230 V, 50 Hz, all as per instructions and as directed by E-I-C, ES. In case of replacement old/removed items shall be returned to E-I-C, ES.

Power points / Wiring / PVC conduits

Primary Point wiring for light / fan/ exhaust fan with 1.5 sq mm FRLS 1100 V grade PVC insulated copper wire in casing capping/ PVC rigid 25 mm conduit with modular switch socket , plate , fan dimmer accessories , suitable GI Box , ceiling rose & appropriate size of insulted copper wire for earthing. Material are included - modular switch socket , fan dimmer ,modular accessories with concealed PVC boxes face plates , 1.5sqmm size wires , PVC conduit , casing capping and wiring from PVC modular board to lights , fans. etc.

Secondary Point wiring for lights ( 1st light to 2nd light ) with ISI mark 1.5 sq mm 1100 V grade PVC insulated copper wire in casing capping/ PVC rigid 25 mm conduit of (min 25 mm) with ISI mark switch/bell push of 5 Amps flush type erected on best quality modular PVC switch socket fan dimmer accessories , ceiling rose & appropriate size of insulted copper wire for earthing. Material are included - switch socket fan dimmer modular accessories with surface PVC boards , 1.5sqmm size wires , PVC conduit , casing capping and wiring from 1st point to 2nd point

SITC of PVC Casing Capping 1.25 inch with screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling/conceal etc.

 SITC of PVC conduit/ Trucking of 25mm /32mm size with spacers & saddles screws, rawal plug, PVC bends etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling/conceal etc.

Supply & fixing of 25 Amps 2 Pin + Earth (for AC) reroll type Crompton/ MDS or approved make metalic sockets- 1 NO //// 25 Amps DP MCB & Socket with separate Neutral link as controling S/W - 1No.//// 25 Amps with enclosure box. Crompton make metalic top- 1 No. for above socket.

Supply & laying of 1core X 1.5 sq. mm flexible copper wire FR PVC through pvc casing capping / conduits with required accessories as per site conditions with

Supply & laying of 1core X 2.5 sq. mm flexible copper wire FR PVC through pvc casing capping / conduits with required accessories as per site conditions (Red, Black, Green)

Supply & laying of 1core X 4 sq. mm flexible copper wire FR PVC through pvc casing capping / conduits with required accessories as per site conditions (Red, Black, Green)

SITC of 15 A,5 pin, switch socket combination board concealed modular type as per site requirements.

Modular decorative accessories Switch/Socket/Board

SITC of 5A/6A Switch Modular type with removing of existing switch

SITC of 15A/16A Switch Modular type with removing of existing switch

SITC of 5A/6A socket Modular type with removing of existing switch

SITC of 15A/16A 5 pin scoket Modular type with removing of existing switch

SITC 3 way face plate modular

SITC 6 way face plate modular

SITC 3 way surface box modular

SITC 6 way surface box modular

SITC of 3 way conceal box

SITC of 6 way conceal box

SITC of 12 way conceal box

SITC 12 way surface box modular

SITC 12 way face plate modular

SITC 1 way TV/Telephone socket modular

Network / Telephone / Others

SITC of Cat 6 type I/O with RJ 45 socket with Box, faceplate and fixing screws, having the compliance/certifications for ISO 9001:2015 & ROHS (modular data socket)

Supply & laying of CAT_6 LAN cable for DATA including 25mm PVC Conduit with accessories

SITC of Telephone instrument Called ID

Supply & fixing of RJ-11 modular telephone socket with G.I. switch box, modular plate including connections as required.

LAN cable for telephone including 25mm PVC Conduit

Supply and fixing of Digital clock for 300mm x 300mm size 1ph , 230volt operated (pre approved sample)

Supply, laying, testing & commissioning of RG-6 Television cable of through provided casing capping/ PVC conduits/GI-MS pipes on any kind of surface as per requirment with all accessories and fixing arrangement all as per instructions & as directed by E-I-C, ES

Supply & fixing of Insect Killer machine set (Electro Catcher with Twins Tube, 18 /24 inch) 230V inclding fixing chain and accessories

Supply & fixing of Hand Dryer set (Electro) 230V inclding power points and required accessories

Dismentling/ Removing / relocating of existing electrical fixtures and fittings alongwith wiring, switch sockets, fire alarm, fan, light fixtures,, switch board, ex-fan, acces control etc. all complete electrical dismentling works and disposal of unserviceable material outside the ACTREC campus and stacking of serviceable material as directed by Engineer-in-charge.