Tata Memorial Centre Tender

Size of tile 60x60 cm (2' x 2') (joint free) Providing & laying polished vitrified floor tiles in different sizes (thickness to be specified by manufacturer) with water resistant less than 0.08% and confirming to IS 15622 of approved make in all colours & shades, laid on 20mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Gate valve 25mm n.b.: Providing & fixing in position heavy pattern screw down gun metal gate valveG.G.leader make conforming to IS:778with hand wheels at top including testingfor 10 kg/sq pressure with clean &potable water with a minimumtesting duration of two hours etc. and rectification of leak ifany all as per specification and directedby Engineer-In-Charge.

FANCY STOP COCK:(concealed)Providing 15mm dia C.P. brass fancy stop cock weighing Nost less than 600gm of approved make and conforming to IS 781-1977 and fixing with pipeline including cost of jointing materials and testing the joint hydraulically to a pressure of 10 kg/cm2 and rectifying the leaky joints if any complete as specified & directed. (Work includes removing old fittings and handing over the same)

Pillar tap Long Body Not LESS THAN 690 Gms Providing & fixing approved make heavy quality C.P. brass screw down pillar tap with jam nut easy clean variety of 15 mm n.b. etc. complete all as directed by the Engineer-In-Charge (work includes removing old fittings and fixtures and handing over the same)

Fancy Bib Tap two in one Jaguar Make cat Nos. 041: Providing 15mm dia C.P. brass fancy bib tap weighing not less than 600 gm RMC approved make (latest) and conforming to IS 781-1977 and fixing with pipe line including cost of jointing materials and pressure of 10 Kg/cm2 and rectifying the leaky joints if any complete as specified & directed for the following. (Work includes removing old fittings and handing over the same)

Hand Spray with PVC connection (1M long) Providing 15mm dia C.P. brass fancy bib tap weighing not less than 600 gm RMC approved make (latest) and conforming to IS 781-1977 and fixing with pipe line including cost of jointing materials and pressure of 10 Kg/cm2 and rectifying the leaky joints if any complete as specified & directed for the following. (Work includes removing old fittings and handing over the same)

Wall Mounted EWS "ULTRA" Cat No. 20006 with 5 to 7 Ltrs Cistern.:Providing and fixing white vitreous china pedestal type water closet with seat and lid, level white P.V.C. flushing cistern with capacity as mentioned below, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. It should include 'P' or 'S' trap as per approved make with left or right vent in position including fixing it on chair brakcet or wall bracket. With necessary C.P. brass screws & plugs etc. Make : Hindware/Parry ware/cera

URINALS Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively Nos 840.156

SPREADER: Providing & fixing heavy quality C.P. brass spreaders 15mm dia including jointing with white zinc, spun yarn and testing etc. complete for urinals. Nos. 222.6

Pressmatic Taps Jaguar Make :Bib Cock Auto Closing System with Built-in Control Cock with Wall Flange Product Code: PRS-CHR-043. Providing and fixing including removal of existing if any as per the instruction of EIC

PVC LINE 40mm: Providing, laying, jointing, fitting, testing heavy quality P.V.C. pipes of Prince, Supreme etc. make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clamping in wooden blocks if required etc. complete as directed & specified by Engineer-In-Charge.

CPVC LINE 25mm n.b: CONCELEDproviding, laying , jointing, fitting & testing C PVC pipe SDR of heavy quality following dia for hot & cold water distribution system of approved make (prince, fiNoslex, supreme, liason, Astral make) including all fittings required as per site requirement for concealed pipe laying by chasing in wall, floors and making good the same to the original condition and for open type of pipe laying and fixing in proper line & level with necessary PVC clamps wood packing etc. fixing the joints with proper solvent or threaded type fittings or press type fittings etc. complete all as per specified and directed by Engineer in Charge.

75mmP.V.C. PIPES:Providing, laying, jointing, fitting, testing heavy quality P.V.C. pipes of Prince, Supreme etc. make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clamping in wooden blocks if required etc. complete as directed & specified by Engineer-In-Charge.

110mmP.V.C. PIPES:Providing, laying, jointing, fitting, testing heavy quality P.V.C. pipes of Prince, Supreme etc. make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clamping in wooden blocks if required etc. complete as directed & specified by Engineer-In-Charge.

Area of slab upto 0.50 sqmGRANITE: Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

CUDDAPAH Providing & laying 20-35mm thick cuddaph stone slabs in platforms/sinks with all exposed edges machine cut double machine polished in true plane and level with matching cement paste curing finishing the joints neat etc. complete including making grooves in walls for fixing and making good the surfaces.

Bottle trap 38 mm single piece moulded with height of270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing Nost less than 263 gms

VISION PANEL FOR SHUTTERProviding vision pannel in door shutters including making the opening, providing Necessary teak wood frame work and Fixing 3mm glass with teak wood beading All round on both faces including removing & refixing of door shutter etc.complete.

1.5 mm thickLAMINATERemoval of old formica along with the adhesive making the surface smooth & providing & fixing new approved of required specification & colour etc. complete as specified & directed including fevicol, nails etc. complete.

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm [Armstrong make] in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of Aluminum sheet having electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Rectangular shape 1500x450 / 600 MIRROR:Providing & fixing in position 25mm wide beveled mirror/ghost free image made out of best Indian glass 5.5mm thick of approved make, copper coated mounted on 4mm Marine ply fixed in position with 4 Nos. of C.P. brass screws or corner brackets with detachable C.P. brass caps, wall mounting arrangements washers raw plugs etc complete of following sizes and as directed by the Engineer-In- Charge.

Fully panneled.WOODEN PARTITIONProviding making erecting partitions (partly glazed partly panneled or fully panneled) to required ht. With teak wood frame of 50mmx50mm in 600mm sq. panel or as required at site the wooden panneling with 6mm commercial plywood of approved make and quality on both sides of partition with 6mm groove. The glazed portion teak wood 30mmx12mm bedding on both sides to the required shape skirting at bottom on both the sides to required shape and skirting at bottom on both sides with 125mm x 12mm teak wood and top patti with 125 x 20mm T.W.to required flap/or as filler between the wall/ceiling/flooring and partition. The glazed portion of the partition. The glazed portion of the partition shall have approved make/quality –plain/frosted/bazri 4mm thick glass. Above partition shall be provided with partly glazed partly pannelled 35mm thick Hollow core door of required size or as required with necessary teak wood door frame 75mmx50m m and the shutter shall be hinged or sliding and the glazed portion with 4mm plain or frosted glass sheet, beeding alround the shutters, locks, tower bolts, mortice lock with handle suitable size Nos. 2 door closer of everite make and any other fittings & fixtures required all as specified and directed.

HPL Partiton THICKNESS: 12 MMManufacturer And Exporter of a wide array of Exterior Cladding Panel, Interior Wall Cladding Panels, Compact Laminates, HPL Lockers, Hylam Sheet, Laminate Sheet including SS lock,shinges alround the shutters, locks, tower bolts, mortice lock with handle suitable size Nos. 2 door closer of everite make and any other fittings & fixtures required all as specified and directed.

MANPOWER SUPPLYSupply of labour on daily wages in all TMC premises as per requirement basis are follows