Tata Memorial Centre Tender

Providing and installing anchor rods in drilled holes and fixing with adhesives for anchoring base plates of columns to terrace slab/parapet wall. System of Hilti India shall be used with brand name HIT-RE 500 V3 +  HIT-V(5.8) M16 meaning anchor rod nominal diameter 16 mm,  embedment depth in RCC 115 mm total length of rod 185 mm. The rod shall be fully threaded for its entire length.  The adhesive (injectable mortar) shall be HIT-RE 500 V3. The hole in steel baseplate shall be 18 mm. The hole in RCC shall be 18 mm. diameter.  The method of drlling holes, cleaning the holes and injecting the adhesive shall be as specified by Hilti. The tools and equipment such as drill machine, blow pump, injecting gun etc. shall be those prescribed by Hilti. A washer and nut shall be provided.  Minor levelling shall be done by providing a thin layer of suitable grout. If existing slab is not in level and major adjustment is required it shall be done  in steel work by adjusting the level of purlins.  Mode of measuremments : The number of rods installed shall be count.

Providing structural steel (mild steel as  defined in IS 800-2007 clause 2.2)for frame work of the proposed structure including fabricating, cutting, welding, rivetting, bolting, erection with one coat of primer and 2 coats synthetic enamel painting .

Providing and fixing G.I. chain link fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade