Takhat Sachkhand Sri Hazur Abchalnagar Sahib Tender

AMUBRKT U-BRACKET KIT for AM40 ( Item Includes of Supplying, Instalation, Testing and Commissioning. )

Supply of 8 channel class D Power amplifier with a Max Output Power of 8x500W@4 ohms, or bridged mode output power of 4 x 1000W @ 8 ohms/70/100V. 20Hz - 20 KHz, SNR of 101dB and THD + N of 0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc with Ethernet Port for Network Control, programming and monitoring.Analog input sensitivity for rated output: 0, +4, +12 and +24 dBu, user selectable; The amplifier front panel shall contain a user interface with a 240 x 64 LCD primary display, with LED indicators for signal present,input clipping, output limiting and fault. Functions accessible from the front-panel interface shall include output configuration, fault logging, mute, input sensitivity selection, output attenuation, EQ on/off per channel and loudspeaker processing preset recall .The Damping factor shall be 1000. The amplifier shall implement Dual Voltage and Current feedback technology to provide power as per the load demand. Shall offer optional Network audio connectivity (Dante ) through expansion slot. Warranted for at least 5 years. ( Item Includes of Supplying, Instalation, Testing and Commissioning. )

SITC of Dante based Digitial audio input card for offered multichannel amplifiers.; Port Modes : Switched (default), Redundant Legacy Hardware Isolated (for control only); Interface Data: Dante network audio and control data ; Format 48 kHz, 24 bit PCM; Shall support redundant connections compelte with standard accessories.Channels In 8 ,Channels Out 8, post-processing Flows Up to 16 simultaneous Interface-Connectors Two 1 Gb (Gigabit) Ethernet RJ-45 Secondary Port Modes Switched (default) / Redundant / Legacy Hardware (multicast filtered) ( Item Includes of Supplying, Instalation, Testing and Commissioning. )

Supply of digital audio DSP with 32-bit fixed/floating-point DSP 456 MHz/ARM Cortex-A8 600 MHz processor or better with following features and specifications are required: The audio DSP shall have 12 balanced inputs and 8 balanced output channels for microphone or line-level analog audio signals, each independently controllable . The DSP shall have Dante® digital audio networking up to 64 input and 64 output channels, an Ethernet connection for control and programming on an RJ-45 jack, USB audio and 8 digital channels on an RJ-45 jack. The audio DSP shall include configurable signal processing, like signal routing and mixing, equalization, filtering, dynamics, delay, room combining, as well as control, monitoring, and diagnostic tools. The audio DSP shall control and proxy all expansion devices and other Dante® endpoints.It shall have following specs : Frequency Response-18 Hz to 20 kHz (+0.8 dB/-0.2 dB ref 1 kHz) THD+N 0.003% @ +4 dBu (A-weighted/20 Hz to 18 kHz) Channel Separation (Crosstalk) -105 dB at +4 dBu 1 kHz input signal Dynamic Range 115 dB, A-weighted 20 Hz – 20 kHz, analog input to analog output. ( Item Includes of Supplying, Instalation, Testing and Commissioning. )

Supply of 8 channel class D Power amplifier with a Max Output Power of 8x500W@4 ohms, or bridged mode output power of 4 x 1000W @ 8 ohms/70/100V. 20Hz - 20 KHz, SNR of 101dB and THD + N of 0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc with Ethernet Port for Network Control, programming and monitoring.Analog input sensitivity for rated output: 0, +4, +12 and +24 dBu, user selectable; The amplifier front panel shall contain a user interface with a 240 x 64 LCD primary display, with LED indicators for signal present,input clipping, output limiting and fault. Functions accessible from the front-panel interface shall include output configuration, fault logging, mute, input sensitivity selection, output attenuation, EQ on/off per channel and loudspeaker processing preset recall .The Damping factor shall be 1000. The amplifier shall implement Dual Voltage and Current feedback technology to provide power as per the load demand. Shall offer optional Network audio connectivity (Dante ) through expansion slot. Warranted for at least 5 years. ( Item Includes of Supplying, Instalation, Testing and Commissioning. )

SITC of Dante based Digitial audio input card for offered multichannel amplifiers.; Port Modes : Switched (default), Redundant Legacy Hardware Isolated (for control only); Interface Data: Dante network audio and control data ; Format 48 kHz, 24 bit PCM; Shall support redundant connections compelte with standard accessories.Channels In 8 ,Channels Out 8, post-processing Flows Up to 16 simultaneous Interface-Connectors Two 1 Gb (Gigabit) Ethernet RJ-45 Secondary Port Modes Switched (default) / Redundant / Legacy Hardware (multicast filtered) ( Item Includes of Supplying, Instalation, Testing and Commissioning. )

Condition power supply for amplifiers ( Item Includes of Supplying, Instalation, Testing and Commissioning. )

RACK ( Item Includes of Supplying, Instalation, Testing and Commissioning. )

Connectors, Integration, Programming, Support ( Item Includes of Supplying, Instalation, Testing and Commissioning. )