South Central Railway Tender

Fixing, connecting, testing and commissioning of 16 W LED cat walk light fitting(4W+8W+4W) with IP 67 protection necessary hardware material for Cat walk lighting including all accessories etc.

Design, Supply, of Control Panel Unit containing 3 Nos. SMPS POWER SUPPLY UNITS enclosed in sheet steel enclosure with all connected safety accessories, Indications & Controls, 5 dedicated for the High Power LED Based 16 W LED Pit/Catwalk Lights as per following Specification PANEL containing 3 nos. of SMPS units, Each will be suitable for 7 Nos of Pit/Catwalk lights total 7x3=21Nos of Pit/Walk lights) Specification for each SMPS Unit: Input Voltage: 180V to 260Volts, Output Voltage :24 Volts dc+/- 1%Regulation-C, Output Current: 10 Amps Each SMPS, Protection : Short Circuit Proof, Over Voltage Protection, Ripple:< 200mvincluding all accessories.

Fixing, connecting, testing and commissioning of SMPS BASED Power supply units with connected accessories etc.

"Supply and erection of concealed laying of 25 mm dia 2mm thick UPVC pipe (ISI MARK) heavy mechanical stress FRLS with all required accessories including masonry work and labour charges etc. Make: Sudhakar /Nandi /Godavari /Nagarjuna. "

Providing & erecting 5 m high (clear height)galvanized OCTAGONAL pole with foundation bolts having bottom of 130 mm A/F, top 70mm A/F on provided foundation as per specification No. OH-PL/OPL.

Providing & casting of M - 20 grade reinforced cement concrete (RCC) foundation 9 suitable for 3m to 5m high octagonal / conical G.I. pole considering the safe soil bearing capacity at site as 10 T/sq m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template as per design in an approved manner.

Supplying and erecting Street light bracket for erection of Double fitting made from 40 mm. dia 'B' class G.I. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FG-BKT/BPC

"Service connection to the fitting from the junction box of 5 mtrs. Octagonal pole by means of PVC insulated copper conductor of 3 core 1.5 sq mm with necessary lugs at the junction box and necessary termination at the luminaire complete"

Supply and fixing of 40 W LED type weatherproof street light fitting complete with all accessories and conforming to CEE/SC's specification no. SCR/LED (OD) LIGHTFITTINGS/003 (Amdt.3)- 2017 or latest. Make: Bajaj/Havells/ Philips

Supplying & erecting mains with 2x6 sq mm and earth wire 4 sq mm FRLSH PVC copper wire, in HMS PVC conduit min.20mm dia, asper specification. Make: Havells/Finolex/Polycab.

Supply, fixing and installation of 32 A industrial 2P+E plug and socket with 32 A DP MCB. Make: Legrand/L&T/INDOASIAN/Schneider or similar

Supplying of programmable digital almanac timer microcontroller based with real time 15 clock to operate on derived switching-ON &switching-OFF streetlight asper daily sunset and sunrise respectively automatically having 4-digit LED continuous time display, relay output 230V/10A with 10 hrs. battery backup and manual over drive facility capable to drive different capacity contactors timer erected in provided M.S. box in an approved manner.

Supply, erection, testing, connecting and commissioning of outdoor type 230/110Volts DC battery charger suitable to work on 240Volts 50 HZ single phase AC supply with output current of 35 to 40 Amps as per RDSO Specification No. EL/TL/52 complete with all accessories.

Construction of masonry plinth of suitable size for installation of battery charging with 17 all connected works including required hardware etc. complete. The scope also includes fixing of the battery charger on the masonry plinth with suitable clamps and connected hardware for anti theft arrangement. This work is to be executed as per the planning and instructions of Railway site Engineer with all accessories.

Supply, Fabrication, and fixing of battery charger mounting arrangements fabricated with MS channels and angles as per DEE/CN/BZA's drg. No. DEE/CN/Drg4A/95 and shall be painted with two coats of red oxide and two coats Aluminum paints with all accessories.

Supply, erection, testing and commissioning of Thermoplastic Polycarbonate Cable 19 junction box (Dimensions of 300 mm x 450mm x 170 mm (LxBxH)) with IP 65protection with metric knock-outs for cable entry, Double compression glands and with 4terminals, suitable for cable size 50/70 sq mm including provision for locking arrangements, internal copper cabling and with all connected accessories.

Supply, fixing and connecting of 63 A3P+N+E Industrial Panel Socket Box havingIP67 protection with 63A MCB as per the site conditions and as directed by site engineer. Make: Legrand/Havells/ L&T/Schneider/INDOASIAN

Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/flush mounted with 4 ways for incoming and 12 ways for outgoing SP/TPMCB's on iron frame/laminated board as per specification No. SW-SWR/MCBDB Make: Legrand/ Havells/L&T

Supply, erection and marking TPN MCB 63A,10 kA C-series in provided distribution boards per specification No. SW-SWR/MCB Make: Legrand/ Havells/L&T.

Supply, erection and marking DP MCB 16-32A, 10 kA B-series in provided distribution board as per specification No. SW-SWR/MCB Make: Legrand/Havells/ L&T.

Supply, erection and marking SP MCB 16-32A, 10 kA B-series in provided distribution board as per specification No. SW-SWR/MCB Make: Legrand /Havells/L&T.

"Supply, fixing, testing and commissioning of Microprocessor Release 125 A ; 4Pole, 25 MCCB suitable for operation on 415V,50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached. Make: L&T/ Legrand/Havells Or Similar"

Supply, fixing, testing and commissioning of Microprocessor Release 160-400 A range; 4Pole, MCCB suitable for operation on 750V,50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached. Make: L&T/ Legrand/Havells

Supply & fixing of 250A on-load change over switch suitable to operate on 415V, 50Hzconforms to IS:13947-3 with sheet steel enclosure front handle operated. Make: L&T/Legrand/Havells

"Supply, laying, erecting, connecting, testing and commissioning of 4core 70 mm2 LT XLPE UG Aluminum Cable, 1100 Volts as per IS:7098/Pt. I/1988 or latest make: Polycab/Havells/Finecab or similar approved by Sr DEE/M/NED. "

"Supply, laying, erecting connecting, testing and commissioning of 2core 70 mm2 LT XLPE UG Aluminum Cable, 1100 Volts as perIS:7098/Pt. I/1988 or latest make: Polycab/KEI/Havells/Finecab/LS/Gloster"

Supply and laying of ISI marked 4 core 16 sqmm cross linked polyethylene 30 (XLPE)insulated LT UG cable, PVC outer sheathed,armored with galvanized round steel wire orsteel strip and with Aluminium conductorsuitable for rated voltage at 1100 volts gradeand conforming to IS:7098(Part-1)/1988with amdt. no.1,2 & 3 (reaffirmed 2005) orlatest. 31

Supply and running of 8 SWG GI wire is to be laid for earth continuity.

"Excavation of cable trench 30 cm wide x90cm deep in all types of soils for HT/LTUG cable as per specification No. Y/E. cable laying/6/99 annexed."

Cutting of esphated road/ concrete/ cement/under the track etc., and excavation of 33 cable trench 30 cm widex 90cm deep oad etc., for laying of HT/LT UG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly.Engineer.

Supply, fixing and laying of GI perforated cable tray of size 300 mm x 50 mm x 2 mm Thick with all connected accessories.

Supply of 50 mm dia 'B' class ERW GI pipe conforming to IS: 1239 Part 1 (2004) and fixing with suitable clamps on wall/building including laying of cable through GI pipe. 36

Horizontal drilling of bores for laying of LT UG cables across the road/track.

Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panelboards etc. including cutting, bending, drilling, welding, riveting etc. treated with anti-rust treatment and duly power coated asper the above specification.

Supplying and erecting of any size electrolyte copper Patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% copper purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete.

Supply, laying, erecting, connecting, testing and commissioning of 4core 400 mm2 LT XLPE UG Aluminium Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest make:Polycab/KEI/Havells/Finecab/LS/Gloster only.

Supply, erection and laying of HDPE (High Density Polyethylene pipe) pipe of PE-80 40 Grade in PN- 4 outer dia of HDPE pipe 160mm (nearest6" dia) and wall thickness minimum 6.2mm maximum 7.1mm with joints, bens, elbows etc. including all other connected accessories. Make: M/s. Sudhakar/Nagarjuna polymer/Nandi/Plasto only.

"Supply of Metravi Manual Digital LCD Display LCR Meter, Measurement parameters: Inductance (L),Capacitance (C),Resistance (R), Features Overload indication, Backlight Display, Damaged or open fuse detection function, Strong Protective Holster., Max, Min and Avg recording., Auto-Power Off ,Relative mode with zero reference or user supplied reference, Automatic blown fuse indication., MAX HOLD facility, DATAHOLD facility, Low battery indication, Diode Test, Continuity Test, Duty Cycle , Transistor hFE test, Auto Zero Mode. Test fixture/Test Leads External Test Leads Maximum counts of LCR Display 1999 Measurement Range Frequency 2KHz to 15MHz Basic Accuracy 41 R (rdg-Reading, dgt-Digit) +/-(0.5%rdg+3dgt) Maximum counts of Q.D.R Display 9999 No. of Digits in LCR Display 3.5 Measurement Range DC Voltage 0-10V Display Digital LCD Display Measurement Range AC Current 20mA to 10A Measurement Range Q 0.001 to 1999 Measurement Range D 0.001 to 1999 Measurement Range L 2000microH to 10000H Basic Accuracy C (rdg-Reading, dgt-Digit) +/- (2.0%rdg + 10dgt) Measurement Range C 2000pf to 10mF Test Frequency (in Hertz) 1000 Internal Power Source Six AAA 1.5V batteries Test Parameters NA No. of Digits in Q.D.R Display 4 Digits ACCESSORIES Test leads pair Measurement Range DC Current 20mA to 10A Basic Resolution L 0.001 micro Henry Basic Resolution C 0.1 pico Farad Basic Resolution R 1m ohm Display digit Size mm 14mm Measurement Range ? (Phase Angle) 0.00 degree to +/- 180.0 degree Measurement Range Z, R, X 20 ohm to 10M ohm".

Supply of Hand Driven Generator Type Insulation Tester, Megger 500V, 500Mega Ohms, Metal Body Make: Yokin or similar.

Supply of Hand Driven Generator Type Insulation Tester, Megger 1000V, 2000 Mega Ohms, Metal Body Make: Yokin or similar.

"Supply of Outdoor type MFM Meter Panel with 3 Nos CT 600/5amp 10va operation voltage 750volt. with control transformer 750v to 415v 100Va as per suitable Indication Lamp RYB. Panel fabrication CRCA Sheet 2 mm thick panel colour RS7035 panel as per suitable size.

supply, erecting and connecting of SMPS Single Phase Power Supply - 100.240V Input - 24V DC Output - 100W - 4,5A Make: Schinder or similar.

"Supply, fixing and installation of PANASONIC EQ34PNJ Photoelectric Sensor, EQ-30 Series, 2 m, Reflective, PNP, 10 V to 30 V. (it includes supply of sensor, plug in connector and 46 mounting bracket ant etc..). Photoelectric Sensor with PNP output, plug-in connector. Unaffected by colour or material, 2m (6.562ft) distance adjustable fixed-focus sensing. Automatic interference prevention. It can be used in places splashed with water. Stability indicator -25 to 55°C Operating temperature IP67 Protection rating".

Supply, fixing and installation of 32 A 3 phase contactor with 1 NO and 1 NC Make: Schneider/Legrand/L & T/ Siemens/Havells/INDOASIAN

"Supply, fixing and installation of Off-Delay Electronic Timer 5 - 100 sec Input Voltage : 24/200-240 AC, 24 DC Make: Siemens or Similar ".

supply, fixing and installation of 220-240V/AC Auto Day/Night On & Off Photocell Sensor, LDR Sensor Switch for Lighting, Water Proof (IP65) Photocell Sensor 20A | ESYSENSE ESY- LD27 | Set of One.