South Central Railway Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
South Central Railway - SCR Tender
Transportation and Logistics
Ireps
Opening Date27 Jan 2025
Closing Date18 Feb 2025
Tender Amount₹ 2,55,38,340.75
Technical
Technical
Financial
Bid Capacity
... View More
The bid capacity required in the given tender can be calculated using the formula: Available Bid Capacity = [A x N x 2] – 0.33xNxB Where, A = Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender), N = Number of years prescribed for completion of work for which bids have been invited, B = Value of existing commitments and balance amount of ongoing works with the tenderer as on date one month prior to the tender closing date to be completed in next ‘N’ years. In case of a Joint Venture (JV), the arithmetic sum of individual “bid capacity” of all the members shall be taken as JV’s “bid capacity”. If the available bid capacity is lesser than the estimated cost of work put to tender, the offer shall not be considered even if the bidder has been found eligible in other eligibility criteria/tender requirement.
Technical Capacity
... View More
The required prior work experience for the bidder includes successfully completing or substantially completing similar works. The specific requirements are as follows:
- Three similar works each costing not less than 30% of the advertised value of each component of the tender.
- Two similar works each costing not less than 40% of the advertised value of each component of the tender.
- One similar work costing not less than 60% of the advertised value of each component of the tender.
The similar works should have been completed within the last 07 years. For subcontractors, they must have successfully completed at least one work similar to the work proposed for subcontract, costing not less than 35% of the value of the work to be subletted, in the last 5 years. However, for subletting work costing up to Rs 50 lakh, no previous work experience of the subcontractor is required. Note that work experience certificates issued by entities with an average annual turnover of Rs 500 crore and above in the last 3 financial years are also considered, provided they meet certain conditions. The overall cost, including the PVC amount (if paid), of that completed work or substantially completed work, shall be considered for eligibility. In case of a newly formed partnership firm, the credentials of individual partners from previous propriety firm(s) or dissolved previous partnership firm(s) or split previous partnership firm(s) shall be considered only to the extent of their share in previous entity on the date of dissolution/split and their share in newly formed partnership firm. The tenderer should submit a self-attested/Digitally signed copy of work experience certificate to establish his eligibility criteria. The certificate should contain the details regarding name of work, Agreement No., and other relevant information.
Costs
EMD
₹ 2,77,700Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
N-SG-36-2024-25-PAU-Jn-41-NANDED DIVISION-S AND T/SOUTH CENTRAL RLYTender No
N-SG-36-2024-25-PAU-Jn-41Tender Authority
South Central Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supply of Metallic (MS) colour light Signal Unit.
-
-
61242
... More
Supply of Offset Bracket to suit 140mm dia CLS post with two numbers of U bolts and nuts complete.Inspection by Consignee.
4
4938
19752
... More
Supply of Calling On Signal Unit complete with U Bolts as per RDSO DRG. No. SA.24351 (Adv.) or latest.Inspection by Consignee.
2
4740
9480
... More
Supply of Ground type position light shunt signal complete with base, pipe, arrow mark and hoods as per RDSO DRG. No. SA 23840 or latest.Inspection by Consignee.
2
6083
12166
... More
"Supply of Post type position light shunt signal with hoods, arrow mark and offset bracket to suit 90mm sockets (CLS) with two numbers of U bolts and nuts complete to fix shunt signal below main stop signal as per RDSO DRG. No. SA 23840 or latest.Inspection by Consignee.
2
3502
7004
... More
Supply of Junction type / Direction type route indicator as per specification IRS:S 66-84 Amd. 1 or latest.Five way as per DRG. No. SA 23405.Inspection by Consignee. 10
-
-
9
... More
Supply of GKP type Location Boxes
-
-
405150
... More
Supply of E type lock of specified ward as per requirement with one key E-type lock to DRG. No.SA3376/M or latest and specification IRS: S30-64 or latest.Inspection by Consignee.
10
1051
10510
... More
Supply of Universal Locks with one steel key for every ten locks or part there of (For example, if locks ordered is 10, 1 key is to be supplied and if locks ordered is 20, 2 keys to be supplied. However, 2 keys to be supplied if locks ordered is between 11 and 19).Inspection by Consignee. 13
20
195
3900
... More
Supply of PVC insulated Wire Coils
-
-
299800
... More
Supply of relay fixing frame for full location box. The frame shall be of approximate size 940mmx150mm and made with powder coated MS angle of 25mmx25mmx 3mm. The frame shall have suitable holes to fix in full location box.Inspection by Consignee.
20
853
17060
... More
Supply of relay fixing frame for half location box. The frame should be of approximate size 470mmx150mm and made out with powder coated MS angle of 25mmx25mmx3mm. The frame should have suitable holes to fix in half location box.Inspection by Consignee.
20
427
8540
... More
"Supply o f High Availability Single Section Digital Axle Counter (HASSDAC) system complete as per RDSO specification RDSO/SPN/ 177/2012 Ver. 3.0 or latest. The system shall consist of the following: a) Track side high availability digital axle counter unit - 2 Nos. b) Axle detectors (Each 16 set consists of web mounting type 2 Nos Tx coils and 2 numbers Rx coils) - 2 sets c) Vital relay box - 2 numbers. Each box shall be wired with following relays. d) Vital Relay QNA1K, 24V, 6F/6B - 2 Nos. e) Reset Relay QNA1K, 24V, 6F/6B - 1 No. f) Preparatory PR Relay QNN1, 24V, 6F/2B (Dual) - 1 No. g) Clamp with deflector plates and hardware - 4 Nos. h) Reset box Model No.259A - 2 Nos. i) Surge Voltage Protection Device Mounted on DIN 35 Rail - 2 Nos.Inspection by RDSO."
1
887832
887832
... More
"Supply o f Spare Cards f o r High Availability Single Section Digital Ax le Counter (HASSDAC) a s per specification RDSO/SPN/177/2012 Ver. 3.0 or latest. The spare cards shall be supplied as per the make of SSDAC and to the version as specified by the engineer in-charge."
-
-
911836
... More
Supply of cable route tracer with Integrated GPS and Bluetooth, Live GPS data transfer 18 with Mobile App , through B T, User configurable frequency and Current direction indication & 10W T ransmitter with minimum 500mA output current and 90V visible on displa y, with rechargeable Battery. Specification as per section H. Make: Radiodetection (RD8200G) or similar. 3 years OEM warrant y. INSPECTION BY RITES.
4
611240
2444960
... More
Supply of Cable Fault locator as per specification in section-H. Make: RadiodetectionR (1205CXB) or similar. INSPECTION BY RITES
4
490000
1960000
... More
Supply of Earth Leakage Detector (ELD) with configuration specified b y Engineer In 20 charge and a s per specification RDSO/SPN/256/2002 o r latest with insulated tester, test probes, Mounting stand and Fuse board to isolate from distribution board as per requirement of channels.Four channel Earth Leakage Detector.Inspection by RDSO.
10
78179
781790
... More
"Supply of commercial grade operator VDU of size 55"" Full HD, with backlit LED, with HDMI/DVI port, Inbuilt Speaker, required HDMI/DVI cables for connectivity and other miscellaneous item required for installation.Inspection by Consignee."
2
226320
452640
... More
Supply of Thermo shrink jointing kit for jointing underground 0.9mm dia conductor 6 quad cable as per specification IRS: TC 77-2012 Rev. 3 (Amd. 1 to Amd. 3) or latest.Inspection by Consignee. 23
25
3715
92875
... More
Supply of Terminal Block
-
-
90900
... More
"Supply of 24 V DC plug-in type miniature tractive armature, AC immune relay 24 complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60-78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable)."
-
-
579700
... More
Supply of AC immune, plug-in type, Style 'QTA2', 2F/1B DC Neutral track relay for 25 railway signalling track circuits with coil resistance 9 ohm, complete with plug board, retaining clip and connectors as per specifications: BRS 939A & 966 or Latest, IRS:S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable) with interlocking code FGHKX.Inspection by RDSO.
20
4806
96120
... More
Supply of ECR 4F/4B' for 110V AC lit LED signals, complete with plug board, retaining 26 clip and connectors as per RDSO specification No.STS/E/Relays/AC Lit LED Signal/09-2002 Amd. 1 or latest, BRS 941A, IRS: S 23-88 Amd. 1 or latest, IRS: S34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). The interlocking code for this unit shall be ABDHK (with ATC clips).Inspection by RDSO.
20
5841
116820
... More
"Supply of Plug-in type miniature tractive armature Non-AC immune, DC neutral line 27 relay complete with plug board, retaining clip/ATC Clip and connectors as per specifications BRS 930, IRS:S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable)." 28
-
-
707420
... More
Supply of GKP type Location Boxes
-
-
405150
... More
Supply of E type lock of specified ward as per requirement with one key E-type lock to DRG. No.SA3376/M or latest and specification IRS: S30-64 or latest.Inspection by Consignee.
30
1051
31530
... More
Supply of Hylam sheet, resin bonded, grade P3 as per IS specification IS 2036 of 1974 or latest of following size: Hylam Sheet of size: 2400mm x1200mmx6mm.Inspection by Consignee.
4
7124
28496
... More
Modification/alteration/augmentation of existing electronic interlocking (EI)system Medha Make as per Existing RDSO SPN as per approved signalling plans and selectiontable/locking table of stations (Forworking/modification removal etc)technical specification as per specialcondition of contract. This also includenecessary supplies foralteration/ modification for extension ofexisting VDU's software. This alsoinclude necessary alteration inearthing,data 01 loggerwiring,programming,softwaremodification, preparation ofST/LT/RSP/ PD/YDU diagram andnecessary wiring , testing andcommissioning of the system. (RatePer Station). This includes suppliesnecessary for alteration /modificationin VDU's software. This also includessupplies necessary for extension ofearthing themodification/altered/augmented EIthose needed for re-wiring externaldata logger and fuse alarm system.Item includes preparation of SelectionTable/Locking Table, VDU/ControlPanel/Route Section Plan, WiringDiagram and other diagrams (otherTechnical documents required) basedon Signalling Plan supplied byRailways. Completion 'Documents asper special condition of Contract.
1
4572084
4572084
... More
Training of Technician/ Jr. Engineer for installation, Commissioning, Testing, Repairs & Troubleshooting of EI system. (Hard copies of training material/ course modules to be given to each participant)
7
1267
8869
... More
Training of Officers for installation, Commissioning, Testing, Repairs & Troubleshooting of EI system. (Hard copies of training material/ course modules to be given to each participant).
5
1205
6026.75
... More
Excavation of trench, including marking of cable alignment, clearing of jungle, roots of 04 trees, bushes, trial pits if required, refilling with excavated soil, ramming and consolidation after laying of cables complete to the finished item of work in all type of Soil including soft rocky area as per RDSO Sketch No. SDO/CABLE LAYING/003, as directed by engineer in- charge.
-
-
657750
... More
Cutting of Rock, concreting after cable laying with 1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size and curing of concrete to the required number of days, except in 05 bridges, culverts, level crossings, track crossings, cable pits and rocky soil including marking of cable alignment, clearing of debris etc., complete to the finished item of work as directed by engineer in- charge. All the material is to be arranged by contractor. Depth of 300mm and width of 300mm where rock is visible from surface, concreting to ground level as per Drg No.SK/CN/NEW/1.
100
679
67900
... More
Track crossing/ Road Crossing b y Horizontal Boring method at culverts/track/pucca road as per SCR Drg. No. 5770. This also includes insertion of HDPE pipe o f 110 mm/G.I Pipe of 100 mm in the bore drilled (HDPE pipe/ GI pipe is to be supplied by Railway).
100
2264
226400
... More
"Breaking o f metal/ ta r road and refilling after laying the cables a s p e r drawing no.SDO/CABLE LAYING/010. The surface of the road shall be concreted to match with the old surface." 08
100
211
21100
... More
Cable laying and meggering.
-
-
101010
... More
Supply and laying of split DWC pipe in already dug cable trenches a s per Drawing No.SK.9/11 .The unit of RMT means two split pipes of 1 Mtr each.
-
-
496500
... More
Transportation of materials from any Stores to Site and vice- versa including loading and unloading.
-
-
335000
... More
Arranging skilled labour at S&T Stores for loading/ unloading/stacking of departmental materials or misc work in section.
50
593
29650
... More
Provision a n d lay ing c e m e n t concrete (including transportation of all the 12 material)."Providing and laying in position cement concrete of specified grade including the cost of centring and shuttering :- 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)" 13
5
5007
25035
... More
Location box foundation and erection
-
-
522660
... More
Supply and fixing of teak wood reapers suitable for Full location Box with approx 50 mm width x 20mm thick and length of 940mm after applying two coats of wood primer.NO.=PER REAPER.
20
183
3660
... More
Supply and fixing of following Teak wood reapers/ Blocks after applying two coats of wood primer.
-
-
132204
... More
Supply, painting and fixing of gland plate for Location box as per site requirement.
-
-
23280
... More
"Indoor Painting including particulars of CT rack, relay rack, Equipment particulars (IPS, Data logger, UFSBI, ELD, Charger, battery particulars, b lock instrument, V D U and any other 19 equipments in relay room/ IPS room / Battery room / Telecom room / Maintenance room / SM room), earthing particulars including ring earth particulars outside as applicable a n d a n y other indoor particulars a s per technical specification for following stations:" More than Three Road Station. NO.=PER STATION/GOOMTY.
1
22237
22237
... More
Fabrication, supply a n d erection o f conventional E a r t h to Signalling/Telecom equipments -Excavation of earth and providing earth pipe of size 50mm dia. 3.5mm thick 2.0 m. long G.I. pipe of heavy quality with masonry tub constructed around at earth locations as specified by site 20 Engineer. Alternate layers of 30kgs-charcoal and 30kgs-common salt to be filled in the pit while closing. The pipe perforation etc., to be carried out as per drawing No. SK 10/10. The earth pipe to be connected to the function with cable as supplied by Railways. The reading should be painted on the masonry tub. The masonry tub of 300 mm x 300 mm x 300mm (along with Kundi) should be covered with cement slab. 21
10
6652
66520
... More
Earthing and soldering of cable armour.NO.=PER CABLE.
200
31
6200
... More
Provision of temporary signalling arrangement during Non Interlocked working of Signals and Points, such as erection and wiring of temporary relay racks and wiring of relays, SM's slide instruments, wiring alterations in the cable termination rack, apparatus cases, signals, Control panel etc, as per the instructions of Railway representative at site. all other miscellaneous material shall be supplied by contractor
-
-
22
... More
Testing and commissioning the entire signalling installations jointly with the Railway 23 representative at site at the Stations/ LC gates/IBS/Auto Signalling covered under various schedules of the Contract, and ensuring that all the signalling gears are installed and adjusted as per the existing rules.Testing and commissioning of Stations (with more than 5 roads). NO.=PER STATION.
1
51415
51415
... More
"Design of SIP in Auto Cad. Initially, contractor shall submit 3 copies for approval of Railways. One set will be returned duly approved for making a fair copy o r for re-submission for 24 approval after incorporating the changes as required by Railways. After carrying out changes, three Hard copies to be submitted for Railway Approval. After approval, Auto Cad copies to be submitted in USB pen drive along with approved copy in Tracing film and six copies of final approved drawing (Ammonia Print or print as approved by Railway) in properly bound booklet along with its scanned copy. For a Eight-Line Station or more
1
80280
80280
... More
"Design of SWRD in Auto Cad. Initially, contractor shall submit 3 copies for approval of Railways. One set will be returned duly approved for making a fair copy o r for re-submission for 25 approval after incorporating the changes as required by Railways. After carrying out changes, three Hard copies to be submitted for Railway Approval. After approval, Auto Cad copies to be submitted in USB pen drive along with approved copy in Tracing film and six copies of final approved drawing (Ammonia Print or print as approved by Railway) in properly bound booklet along with its scanned copy. For a Eight-Line Station or more
1
34254
34254
... More
"Design in AUTOCAD and submission of two draft copies of Complete Outdoor Particular such as Cable Route Plan, Cable Corage Plan, Cable Termination Rack/Power Rack Particular, Track Bonding, and Location Box Particular along with NI wiring/NI Relay Disposition chart. One copy will be returned either duly approved or for resubmission for approval after incorporating 27 the changes as required by Railways. After approval, one approved Tracing film copy & six copies (Ammonia Print or print as approved by Railway) of above drawings along with six copies of SIP and SWRD in Plastic Covers. All above drawing to be scanned including SIP & SWRD, bound in 6 different booklet with Rexin Cover (Each booklet shall have minimum 10 spare plastic transparent sheet) and a soft copy to be submitted in a Pen Drive for following categories of Stations: For a Eight-Line Station or more (Up to 110 Location Boxes)
1
155906
155906
... More
Design of Location Box Drawings in AUTOCAD (Including Contact Analysis, Fuse 28 Particulars, cable particulars etc) and submission of Three paper copies for approval in A4/A3 white papers. After approval, AUTOCAD copies to be submitted in USB pen drive along with approved copy in Tracing film and six copies in Ammonia print o f final approved drawing in plastic cover in properly bound booklet along with its scanned copy.
80
584
46720
... More
Supply of Original Tracing of Location Box Drawings (Including Contact Analysis, Fuse Particulars etc) along with softcopy in CD after incorporating all the corrections. For a Eight-Line Station or more. NO.=PER STATION.
1
4406
4406
... More
Alteration o f Existing Location B o x Drawings (Including Contact Analysis, Fuse Particulars etc) and submission of Three paper copies for approval.NO.=PER SHEET.
20
367
7340
... More
Supply of drawings in Original Tracing (Matt Film), A-3 Size. NOTE: - For Drawings larger than A-3 Size, payment shall be made in multiples of A-3 Size.NO.=PER SHEET. 32
500
58
29000
... More
Supply of Ammonia Prints or Print as approved by Railways
-
-
30950
... More
Circuit Diagrams. Arranging rexin cloth bound booklets and binding. NO.=EACH BOOKLET. 34
-
-
33
... More
Scanning of Documents from the approved Tracing film
-
-
21500
... More
"Supply & Laying of G.I Pipes with medium and threaded collar & coupler, quality to specification IS.1239 (part-I) 1990 and galvanised to specification IS.4736-1986."
-
-
302500
... More
Shifting of existing working functions like signals/Shunt/ Calling on/Points/Track circuits 36 etc. from old cable to new laid cables carefully without affecting the traffic under disconnection/blocks, This work also includes releasing the existing tail cables from the relevant gears and re- surfacing the earth excavated as instructed by Railway representative at site.NO.=PER CABLE.
20
2123
42460
... More
Supply of Track feed battery charger to work on 110V AC for charging1or 2 or 3 or 4 lead acid cell of 80AH (10Amps) used in track circuit as per RDSO Specn. No. IRS.S.89/2013 Ver 1.0 latest.Inspection by Consignee.
10
8294
82940
... More
"Supply, transporting and installation of Concrete (RCC) Route Indicators at intervals of 38 50 meters as per instructions o f engineer in charge as per drawing no. SK 12/10.They should be of standard RCC with letters ""SCR S&T cable"" as per type of cable laid to drawing. In case of telecom quad cable joint locations it shall be painted with GREEN and ORANGE colour for normal indication of cable path.Inspection by Consignee."
60
1204
72240
... More
Manufacturing, Supply, painting and fixing of markers of G/P/C/A/AG/IB Markers as per IRSEM Drg.No.19-D10 on MS sheet of thickness 3mm. Miscellaneous material required for fixing Markers is to be supplied by contractor.Inspection by Consignee.
20
469
9380
... More
Supply, Installation and commissioning o f Universal Fail safe Block interface (As per 40 RDSO Specification No. RDSO/SPN/147/2005 with latest amendments) suitable to work on OFC/1 Quad cable for IB Signalling/Auto signalling or any other requirement including 68 No. of QN1 (8F/8B) relays required for system commissioning.Inspection by RDSO.
1
960520
960520
... More
Supply, Installation and commissioning of Block proving by Axle Counter [BPAC] using block panel and UFSBI for Double line operation as per RDSO Spec. No: IRS- 105/2012 [VER.0] with latest version and amdt. Each set consisting of the following: 1. Universal fail safe block interface 41 complete with all accessories as per RDSO Spec No: IRS- S104/212[VER.0] with latest version & Amdt- Qty-02 Nos. 2. Block Panel complete with all accessories as per RDSO Drg. No. RDSO/S/32017[latest amdts] Qty -02 Nos. 3. Relay Rack duly wired with due locking and sealing arrangement as per RDSO Drg. No. RDSO/S/32018 including relays for each Relay Rack [QN1-19 No's, QNA1-07 No's, QL1-02 Nos, and Timers -01No]-Qty 2 Nos. 4. Block Telephone with accessories as per RDSO spec. No. RDSO/SPN/191/2006-Qty 02 No's.Inspection by RDSO. Per
1
1261656
1261656
... More
"Supply of fan less embedded industrial grade computers (Similar to Moxa V2406A or 43 better ) with all accessories such as key board, mouse, antivirus etc. of industrial grade as per approved Specification as recommended by RDSO (TAN No. STS/TAN/3007 Version 1.0 or latest).Inspection by Consignee."
1
182900
182900
... More
Commissioning of Electronic Interlocking system.
1
25604
25604
... More
Training of Railway Personnel in installation, commissioning, testing, trouble shooting and in diagnosing faults using diagnostic tools/flow charts including supply of necessary documents
14
1246
17444
... More
Training on application software for designing, change in the logics and converting it suitable for system and loading the programme into the working system for alteration of SIP/TOC. The training should be comprehensive with complete document.
-
-
47
... More
"Straight through / derivation with/without transformer joints: Installation Thermo shrinkable jointing kits for straight through/ derivation joints for LC gate, pump houses etc where VF 48 transformers are not required and derivation joint by using 2T transformer ( to be housed in the joint) . This includes tapping of nominated Quad at a specific location shown by the Railway Engineer at site to the jelly field cable already laid. All material including valco tapes except thermo shrinkable jointing kit shall be supplied by the contractor."NO.=JOINT.
10
1449
14490
... More
Laying of HDPE duct 40/33 mm dia in the trenches and in protective works already provided.
2
7410
14820
... More
"Blowing of armoured optic fibre cable (OFC Cable supplied by Railways) into the duct supplied vide other NS item of supply portion by using blowing machine and associated works. 10% of 50 OFC length to be blown extra on both ends of Duct i.e. total 20% of Duct length. Before blowing the duct integrity shall be tested. If any defect is found during duct integrity test, the entire length of HDPE duct from one chamber to another chamber is to be replaced by the contractor at his own cost. Payment will be made as per the length of Duct from which OFC is Blown." 51
2
10956
21912
... More
Carrying out Duct Integrity test for PLB HDPE Duct, 40/33 mm Dia, as per specification.
2
1750
3500
... More
Excavation of jointing pit and provision of RCC/FRP joint / Loop chambers of 90 Cms. Inner dia 60 Cms depth and 3mm thickness with two pieces of top cover with hooks each and bottom 52 cover with hole for drainage and cable entry as per Drg. No. RAILTEL/SR/OFC/ 2009/12 and as directed by Engineer to be provided at every joint location and at every Kilometre loop etc., The chamber shall be filled with sand mixed with anti-stermic power, back filling and ramming of trench after HDPE duct laying, splicing and commissioning.
4
6344
25376
... More
"Supply and Installation of OFC joint enclosure and splicing of Optic fibre cable (24 fibres) and testing as per technical specification No. GR OJC-2/02 Sept 2003. Supply of Splice Enclosure 53 (24 fibre) shall be of TVS make Part No.1500-L18X-XX or similar as per Board specification of TEC.& as per RDSO/SPN/TC/68/2014 Revision 1.0 amd 1 or latest . All materials including Fusion splicing machine used for fibre splicing and, OTDR for testing and other testing materials if any shall be arranged by the contractor.Inspection by Consignee."
4
9398
37592
... More
"Supply and installation o f rack mounted 2 4 fibre Distribution Management System 54 (FDMS) o f size 1U, of Reputed/Branded company make a s per specification RDSO/SPN/TC/37/2020 Revision 4.0 with latest amendments. The FDMS shall include 24 SC-PC/Required adaptors having insertion loss less than or equal to 0.1dB and 2 4 numbers 9 0 0 micron 1 .5m SC-PC/Required pigtails.Inspection by Consignee." 55
2
23712
47424
... More
Testing of all 24 fibres of OFC cable after splicing end to end in a section (Long Haul).
1
21512
21512
... More
Testing of fibres between short haul station in both direction after splicing the required fibres 57
1
7769
7769
... More
Provision of KAVACH arrangements
1
1886037
1886037
... More
Supply of GI termination box (10 SWG) for point machine of size 45 cmx23 cmx12 cm 58 with double coat of enamel paint (outside: Black & inside: white) along with 2nos of MS angle of size 50x50x6mm of length 1000mm each, 2 numbers of 40mm GI pipe of length 450 mm & 150 mm with nuts/washers and teak wood plank of size 40 mmx25 mm for fixing of terminals.Inspection by Consignee. 59
10
2902
29020
... More
Supply of Ground connections for point machines. 60
-
-
307620
... More
Supply of Insulations for Ground connections
-
-
22848
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%