Soil And Water Conservation Department Tender

Item No. 3 :- Excavation in all types of soil / silt / soft murum / lime shadu / hard murum, soft rock for nalla deepening (exceeding 1.50 m. In width) including depositing the excavated material as directed with all leads and lifts including dressing etc. complete.

Item No. 4 :- Providing and laying plain cement concrete of grade M-150 (1:2:4) prop. 40 MSA of trap / granite / quartzite graded metal for foundation and bedding of weir body wall including mixing, placing / casting the cement concrete at the desired location, vibrating, finishing he surface, watering, curing, with all leads and lifts etc. complete as directed. (excluding reinforcement) (cement 5.20 Bags / cum).

Item No. 5 :- Providing, errecting & laying form work for plane surface, including making suitable for concreting, dismantling etc. Complete with all leads & lifts as directed.

Item No. 6 :- Providing & fixing TMT steel reinforcement bar as per design and drawing including cutting, bending, hooking binding with G. I. wire as directed with all lead & lifts etc. completed.

Item No. 7 :- Providing Earth work in embankment & filling in excavated trenches (back filling) behind abutments, piers & wings etc. with available soils of approved quality from excavation spoil banks including laid in layers, breaking clods, with all leads and lift excluding watering and compaction etc. complete.

Item No. 8 :- Drilling holes in hard rock for fixing anchor bars in foundation as directed etc. complete.

Item No. 9 :- Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M. S. Sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zine chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50 X 50 X 5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G. I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer in charge.