Soil And Water Conservation Department Tender

Item No 4 :Providing cut off trench filling using selected impervious soil from approved borrow areas including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller etc., complete with lead upto1 km and 6m lifts.

Item No 5 :Providing hearting embankment using selected impervious soil from approved borrow areas in layers including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller etc., complete with lead upto1 km and 6m lift.(B) From B P

(Item No 6 : Providing casing embankment using selected pervious material from approved borrow areas in layers including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor etc., complete with lead upto1 km and 6m lift. (B ) From B P

Item No 7 : Pro.& fixing dry rubble stone masonary of approved quality including hand packing etc as directed. as and where directed etc comp

Item No 8 : Providing & fixing welded wire mesh 2.5"x2.5" 10 Guage etc. complete as directed

Item No 9 : Providing 500micron polythene sheet on casing etc. completeas directed.

Item No 10:Providing earth work for raising bund with impervios soils of approved quality from Utilisation for any kind of soil including layers not exceeding 23 cm.thickness including watering and compaction with power driven roller including al leads and lifts as directed.

Item No 11 : Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips, finishing etc., complete with lead upto 50 m and all lifts excluding royalty of material.

Item No 12 :Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-incharge.