Shri Saibaba Sansthan Trust Tender

Toilet Entrance Doors @ GF, FF, SF -

Providing and fixing 30 mm thick 100% solid WPC (Wood Ploymer Composite) both side decorative / laminated flush door shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade). Calcium Carbonate and natural fibres (wood powders / rice husk / wheat husk) and non toxic additives, made from extrusion process WPC foam sheet. Single Extruded (Inner) with having minimum density not less than 650 kg/cbm, having good screw holding capacity (Screw withdrawal strength of 2000 N (FACE) AND 1100 N (Edge), Min Compressive of 50 N/mm2,Mudulus of Elasticity 850 N/MM2 and resistance of spread of flame of Class A category with property of being Termite / Borer free. Water / Misture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thickness of approved design pasted on both faces of shutter and fixing SS butt hinges / SS auto closing hings of required size with necessary full body threaded star headed counter sunk SS screws. All as per direction of Engineer-In-Charge. Material test certificate and authentication should be compulsary provided by the manufacturing company. For WC / Bathroom/ Toilet / Kitchen/ Balcony Doors. etc.. complete. (With SS Accessories, Godrej / Hettich heavy duty door closer and auto door closing mechanism).

WPC Door Frame for Toilet Doors

Providing & fixing factory made door / window frmaes of required colour made with woo dpolymer composite (WPC) extruded internal ribbed sections conforming to American Society for testing and materials (ASTM) in regard with density, tensile strength, flexural strength, Izod impact, water absorption and screw withdrawl stregth with wall thickness of 5 mm (+/- 1 mm) and with frames having mitred joints at each corner, joined together by two nos. of 10 x 8 mm & 40 mm long PVC dovetail keys including hard wood piece support along the full verticla and horrizontal length in rebate portion hole for fixing hinges and fixtures and the frames fixed to walls / columns with 15 mm long dash fastners / holdfasts (dash fastners / holdfasts to be paid separately) etc complete as per the directions of Engineer in charge, with prior approval of concerned Superintending Engineer. (Profile Size 100 x 50 mm with 32 x 12 mm rebate).

Ticket Counter window for Tea Coffee Counters and Book Stall @ GF

Providing and fixing Ticket counter windows made out of 50 mm dia. SS pipe vertical post 1m High at 350 mm c/c with 12mm thick clear toughened glass fixed to SS posts with SS brackets including necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the counter all complete. (For Tea Coffee Counters and Book Stall @ Ground Floor).

Ventilator Above Toilet Doors -

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers of approved quality etc. complete.

Frosted Film for Hall Internal Windows Glass

Providing and fixing Frosted Film for the Internal Windows of the Halls at First and Second Floor.

B - PRO COUNTER FURNITURE WORKS -

Providing and making Furniture Counter as per required size in 18 mm thk. ply and laminate for counters in PRO Section. The counters shall have 02 drawers for cash and 01 big drawer for filing and papers, the locks, hinges, sliding channels shall be provided of Godrej / Hettich / Hafele / Ebco etc. The rates shall be inclusive of all material, transport, labour, GST, wastage etc. Dimension - Back Panel - L 1800 mm X H 750 MM X D 450 mm. Total Counters - 10 Nos. Plywood - Anchor, Durian, Century, Archid, Merino. Laminate - Century Lam, Green Lam, Merino Lam, Royal Touch. Fittings - Godrej, Hettich, Hafele, Ebco.

C - LADDO COUNTER WORK NEAR PIMPALWADI ROAD -

Excavation for foundation in earth, soil of all types,sand,gravel and soft murum,including removing the excavated material upto a distance of 50m. beyond thebuilding area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 3.00 m.) By Manual Means item no 21.01

Filling in plinth and floors with contractors material / brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc.complete item no 21.37

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thickincluding hand packing and compacting etc. complete. Item No 21.38

Providing and laying Cast in situ / Ready Mix cement concrete in M15 of trap / granite / quartzite / gneiss metal for steps including steel centering formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc.complete.The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc.complete. With fine aggregate (Crushed sand VSI Grade) Item No.24.04.

Providing second class Burnt Brick masonry with conventional /I.S.type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Item no 27.01.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogram per cement bag curing the same for not less than 2 days and keeping the surface oft he base coat rough to receive the sandfaced treatment 6 to 8mm thick in cement mortar1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Item no32.11.

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness andc onfirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirtingin required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc.complete. Item no.32.11 (Tiles will be provided by Sansthan which are available - Only Cement, Sand and labour and fittings charges will be of contractor)

Providing and Fixing of GI Layin Plain metal ceiling consisting of 600 x 600 mm Layin tiles of precoated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15 mm wide T- section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees. Providing and Fixing of GI Layin Plain metal ceiling consisting of 600 x 600 mm Lay in tiles of precoated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with15 mm wideT-section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees. products approved as per GRIHA and BS 476 etc. complete. Item no 38.48

(a) Framework of M.S. hollow sections of size 50 mm x 50 mm and wall thickness 1.6 mm (unit weight 2.38 Kg/m) comprising of horizontal and vertical members @ 600 mm c/c or part thereof, vertically and horizontally fixed firmly to walls/ floors/ceiling with suitable size dash fasteners/ anchor fasteners / metal screws including providing additional horizontal / vertical members in the frame work, if required at the joint of plywood. Rate is inclusive of welding, grinding of joints, making holes in MS sections for passing conduits & making arrangement for fixing of MS electrical switch boxes wherever required using MS flats of suitable section etc. including applying two coats of primer on frame work with approved steel primer, all complete as directed at site. c) Providing and fixing Aluminium Composite Panels (ACP) of exterior grade for cladding of As Per approved equivalent make for external wall / column / canopy cladding in combination of solid / Metallic colours, including all necessary frame work and complete weather sealing. The composite panel should consist of 3mm thermoplastic core of LDPE sandwiched between 2 skins of 0.5mm thick aluminium sheet (alloy designation 310S) making a total panel thickness of 4mm. The surface will be furnished with Lumiflon based flourcarbon coating on top sides and service coating on reverse side. Coatings shall conform to specifications of specifications of ECCA / AAMA and conforming to the mechanical properties of panel as per detailed technical specifications. the system shall be fixed using GI brackets and stainless steel bolts and nuts complete with spring washers and cap nuts and all other necessary accessories. all hardware shall corrosion resistant fixing on 12mm plywood.

Providing Laddu Counters - Providing and making Furniture Counter as per required size in 18 mm thk. ply and laminate for counters in Ladoo Section. The counters shall have 02 drawers for cash and 01 big drawer for filing and papers, the locks, hinges, sliding channels shall be provided of Godrej / Hettich / Hafele / Ebco etc. The rates shall be inclusive of all material, transport, labour, GST, wastage etc.

Providing and fixing 12 mm thick thoughened glass with polished edges and etching as per approved pattern fixed suitably to the public side and transaction top of counters including cutting suitable size transaction/ conversation window, finishing the supports in matching 1.00 mm plain and metallic high gloss laminate complete as directed at site.

Providing and fixing in position. (as per I.S.1868 /1982 ) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ? 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram / One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram / One Running Metre. Top and side track section 61.85 x 31.75 x1.30 mm at weight 0.659 Kilogram / One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram /One Running Metre.Interlocking section 40 x 18 x1.10 mm at weight 0.469 Kilogram /One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram /One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram / Running metre .As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass with all required screws and nuts etc,complete. With powder coating without box item no39.40

Providing and fixing 30 mm thick 100% solid WPC (Wood Ploymer Composite) both side decorative / laminated flush door shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade). Calcium Carbonate and natural fibres (wood powders / rice husk / wheat husk) and non toxic additives, made from extrusion process WPC foam sheet. Single Extruded (Inner) with having minimum density not less than 650 kg/cbm, having good screw holding capacity (Screw withdrawal strength of 2000 N (fACE) AND 1100 N (Edge), Min Compressive of 50 N/mm2,Mudulus of Elasticity 850 N/MM2 and resistance of spread of flame of Class A category with property of being Termite / Borer free. Water / Misture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thickness of approved design pasted on both faces of shutter and fixing SS butt hinges / SS auto closing hings of required size with necessary full body threaded star headed counter sunk SS screws. All as per direction of Engineer-In-Charge. Material test certificate and authentication should be compulsary provided by the manufacturing company. For WC / Bathroom/ Toilet / Kitchen/ Balcony Doors. etc.. complete. (With SS Accessories, Godrej / Hettich heavy duty door closer and auto door closing mechanism)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces,excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Rolling Shutter: Providing and fixing rolling shutter f bricated from steel laths of minimum thickness 0.9mm with lock plate o 3.15mm thickness reinforced with 35x35x5mm angle section fitted with sliding bolts and handles for both sides, deep M.S.channel section of depth and thickness notless than 65mm and 3.15 mm respectively with holdfast arrangements, M.S.Bracket plate 300x300x3.15mm minimum size and shape with square bar, suspension shaft of minimum 32mm diameter, hood cover of M.S.sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of redlead primer etc.complete.(I.S.

Electrical work: Providing & laying Polycab wiring with pvc conducting and necessary fitting above false ceiling and to the concealed switch boards of required modules with necessary fittings of polycab white or equivalent make

Providing and fixing window grill etc. using 12 mm dia bars, welded vertically & horizontally 75 mm center to center or approved pattern and design, consisting of MS angles / flat and bars securely fixed with angle cleats and embeded to the wall, slabs as per site condition and as directed at site including painting the grill with two coats of synthetic enamel paint over a coat of primer all complete

D - NEW DONATION OFFICE WORK -

Providing and fixing fully glazed 12mm thick entrance Toughened glass door comprising of single leaf glass shutter of size 1200 mm and height 2130mm fully glazed and vertical styles and top and bottom rail of 150 mm from both sides with ply and laminate with necessary handles, toughened glass shall be with etching and as per design, pivot arrangements, door closer with SS concealed locks complete etc. hardware to be of Ozone brand, Hettich, Godrej etc.

Providing and fixing partly laminated and partly glazed with 10mm thk. toughened glass partitions made up of CCTW frame of size 75 mm x 75 mm at 60 cm c/c with 8 to 9 mm thick commercial ply on both sides and over it 1 to 1.5 mm thick laminate on both sides, upto 1.20 meter play with laminate shall be fixed on all sides and glass shall be fixed above 1.20 meter height from floor level glass shall have supports of teakwood framing from all sides. The 8mm thk. toughened glass will have etching as per design etc. complete. The glass height shall be of 2.10 meter. The total height of the partition will be of 3.85 meter from floor level etc. (75 mm wide Aluminium Skrting shall be fixed for partition from all sides to protect it from water). complete with all necessay accessories.