Rural Development Department Tender

Dewatering by pumping out water collected with 10 to 19 HP Diesel & Electrical pumps including cost of all materials, machinery, labour, providing sump and all other ancillary operations whenever necessary etc. complete under specific and indispensable circumstances with prior approval from competent authority with authentic evidence of records justifying dewatering etc. complete as directed.

Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for foundation and bedding with Concrete Mixer including placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed. M-15 (40 MSA) (Cement 5.20 bag/CuM)

Providing Reinforcement Steel for PCC Work includes all dia. bars, transportation charges, loading and unloading charges with cutting, bending, hooking and binding etc. complete.

Providing and erecting and laying wood / ply / steel shuttering formwork and make surface suitable for concreting including dismantling, transportation charges and labour charges etc. complete ( Up to 3 M height : Repair works special works)

Straight Needle K.T. Weir Gate-Manufacturing- Manufacturing with QAP & fabrication of KT weir needle gates - straight type size 2.15 x 0.5M- 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177.

Providing CHANNELS 75X40 MM as directed by engineer in charge.

Providing Submerge area treatment for increase storage by excavating silt and soft stuff and shaping to banks as govt circular etc. Comp.

Providing and fixing canal information board (Name Board) of 1.2x0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x3 mm with cross bracing of size 25x25x3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border/letters/numeral / arrows coated with non-peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60x60x75 cm as directed.

Providing Royalty Charges (CSR-2022-23 Gen. Note Para2) (As per seperate sheet attached)For Sand

For Other Materials

Insurance (CSR-2022-23 Gen. Note Para7) (1%)