Rural Development Department Tender

Providing and fixing rubble seal (size 60 x 20 MM) for M.S. Gate including cutting , laying ,in positon tying with nut and bold work as per detailed design and drawing etc including binding wire with all lead and lift as direct complate.

Providing and fixing inposition mild steel needle of 2120 x 500 x 4 mm tk size fabrication with mild steel plate, intermidiate verticle stiffeners ,horizantal stifferners ,angle cleats,mind steel plate packing for nut bolts and lifting hooks etc. including cutting ,fabricating hoisting ,erecting ,fixing in possion ,making rivetted/ bilted/ welded connection and painting with two coats of anticorrosive lead based oil paint with primer coat including testing at site etc complate with lead and lift ,and as per detailed specification,designs and drawing or as directed by the engineer in charge

Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 x 60 x 75 cm as directed by Engineerin-Charge.