Rural Development Department Tender

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm to 20cm including including watering and compaction etc. complete.

Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. No. : As directed by Engineer-in-charge. B-18 Page No. 78

Providing and fixing colour coated Zincalume (R) AZ150 (Min 150 gms/sq.mt. total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45mm Base Metal thickness (BMT) (0.5mm TCT), Histrength steel with min 550 MPa yield strength, metallic hot dip coated with Aluminium- Zinc alloy (55% aluminimum 43.4% Zinc 1.6% sillicon) with Coloured (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface. Profile sheet shall have nom. 950-1050 mm effective effective cover width and nominal 25-30 mm deep ribs with subtle square flutting in the five pan at nominal 180-250 mm center-to center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min 25 um Zinc Tin alloy coated Hex head self-drilling screw etc. As directed by Engineer in charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 mm) Aggregate) MORTH 404

Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand) Bd. M-12 page No. 385

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for bed blocks, foundadtion blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement mortar 1:3 plaster is considred for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin. etc. (Wooden centering will not be allowed.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum type mixer / concrete batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.F.4 Page No. 289 and B.7, Page No.38

Providing and fixing in position public seating R.C.C. chairs (Benches) made of reinforced cement concrete with legs including plastering, fine cement finishing, oil painting transportation & fixing at work site etc.complete. As directed by Engineer-in-charge.

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc-chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge

In SSR for item of supply of Rubble, murum, soil, 60mm/40mm metal (Hand broken), royalty charges are not included in the rates. for the items of sand and crushed metal rates are inclusive of royalty charges. Prevelent Royalty charges shall be separately considered while preparing estimate and shall be part of Schedule _B of tender. Any revision in Royalty charges shall be included in the rate analysis of the respective item. If there is variation in Royalty charges the difference shall be paid extra over the items to the contractor and shall be recovered if the Royalty Rates are reduced by Govt. i.e. Revenue Department (As per Govt. of Maharashtra, Revenue and Forest Departments Gazette No. 67 Dt. 15 May 2015. States that the royalty charges of Rs. 141.34 /cum) are considered. BASIC RATE A) BASIC RATE

B) For Sand 12% of Royalty Surcharge

C) For Other Min. 2% of Royalty Surcharge.

Laboratory testing charges are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by vigilance & quality control, circle, for the current year and shall form part of tender testing of material by quality control and certified quality must be use by contractors. Compressive strength of C.C.Cube (Set of 3 cubes)

Concrete Paving Block : Compressive Strength, Water Absorption (Set of 8 blocks), Flexural Test (Set of 8 Block), Resistance to wear (Set of 8 Blocks)

Add G.S.T. 12%

Add 1 % Labour Insurance

ADD 1% FOR S.Q.M CHARGES