Rural Development Department Tender

Item No. 4 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.: Bd. E. 1 Page No. 287

Item No. 5 :- Filling in plinth and floors with contractors soil sand or murum in 15 cm to 20cm, layers including watering and compaction complete. Spec. No.: Bd.A.11 Page No. 263

Item No. 6 :- Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Item No. 7 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38

Item No. 8 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Item No.9 :- Providing and fixing in position TMT FE-500 bar reinforcement of various diaMetres for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete. Spec. No.: BdF-17 Page No. 306

Item No. 10 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete. Spec. No.: Bd.G. 1 Page No. 313

Item No. 11 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete. Spec. No.: Bd.G. 1 Page No. 313

Item No. 12 :- Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. sPEC nO. Bd.L.4 Page One Number 368

Item No. 13 :- Providing and laying Mat Finish Vitrified tiles of having size 590 mm to 590 to 605 mm x 590 to 605 mm (thickness to be specified by the manufacturer) and confirming IS. 15622-2006 of approved make, shade and pattern for skirting in required position with 1:3 cement mortar bedding including neat cement float, filling joints, curing and cleaning etc. complete. Spec. No.: Bd.M.12 Page No. 385

Item No. 14 :- Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Spec. No.: Bd. M.22 B/Page No. 390

Item No. 15 :- Providing and applying two coats of Waterproof cement paint of approved manufacture and approved colour to plastered surface, including scaffolding if necessary, cleaning and preparing the surfacewatering for two days. complete. Spec. No.: Bd.0.8 Page No. 406

Item No. 16 :- Providing and fixing of colour coated Zinc aluminium ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 900 mm girth (Surface Width). Spec. no.: As directed by Engineer in charge.

Item No. 17 :- Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. Spec. No. Bd.C.8 Page One Number 278

Item No 18 :- Supplying Informatory sign board in square or rectangular shape of size made out of 16 gauge (1.6 mm) thick M.S. sheet including frame of 35x 35 x 3mm M.S. angle painted with one coat of Zinc chromate stoving primer and two coats of green background white border / messages / symbols etc. and back side in grey stove enamel paint including one M.S. Angle frame of 35mm x 35mm x 3mm and two M.S. Angle of size 50mm x 50mm x 5mm long properly cross braced with angle iron of size 50mm x 50mm x 5mm duly painted with alternative black and white bands of 25cm width including G.I. fixtures etc. DSR Page No/ Item No. - 254/ 22

Item No 19 :- Testing of Materials C.C. M20 for RCC Footings….. Compressive Strength of C.C. Cube (Set of 3 Cubes)

Item No 20 :- Testing of Materials Bricks….. Water Absorption, Comp. Strength, Efflorescence Test (Set of 5 bricks)

Item No 21 :- Testing of Materials C.C. M20 for RCC Columns….. Compressive Strength of C.C. Cube (Set of 3 Cubes)

Item No 22 :- Royalty Charges for materials used