Rural Development Department Tender

Providing and laying in situ /Ready Mix cement concrete M­20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel ) etc.complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer/concrete batch mix plant (Pan mixer) etc.complete. With Fine aggregate (Natural sand / crushed sand VSI grade Finely washed etc) Bd.E.3.Page No.298 and B.7 SSR OF 2019-20 ITEN NO.25.01& PAGE NO.230

Providing and laying cast in situ/Ready Mix cement concrete M­20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks,laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fully automatic microprocessor based PLC with SCADA enabled reversible drum type mixer/ concrete batch mix plant (Panmixer) etc. complete. With Fine aggregate (Natural sand / crushed sand VSI grade Finely washed etc) ( Bd.F.7 Page No. and B.5, Page.No.38 SSR OF 2019-20 ITEN NO.25.31 & PAGE NO.232

Providing & laying cast in situ /Ready Mix cement concrete M­20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compaction & roughening the surface if special finish is to be provided & curing etc. complete. (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer/ concrete batch mixer / concrete batch mix plant (Pan Mixer) etc. complete. With Fine aggregate (Natural sand / crushed sand VSI grade Finely washed etc) Bd. F6 Page No. 300 and B.7, Page No. 38) SSR OF 2019-20 ITEN NO.25.5 & PAGE NO.234

Providing and casting in situ cement concrete M­20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With Fine aggregate (Natural sand / crushed sand VSI grade Finely washed etc) (Bd.F.8 Page No.302 and B.7, Page No.38) SSR OF 2019-20 ITEN NO.25.7 & PAGE NO.236

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Bd.F.PAGE NO.303 and B.7 page no.38 SSR OF 2019-20 ITEN NO.26.05 & PAGE NO.239

Providing and fixing in position TMT ­ FE ­ 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page No. 306 SSR OF 2019-20 ITEN NO.26.33& PAGE NO.245

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. . Bd.G. 1 Page No.313 SSR OF 2019-20 ITEN NO.27.01 & PAGE NO.254

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Bd.G.5 Page No. 315 SSR OF 2019-20 ITEN NO.27.05 & PAGE NO.254

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Bd.A.11 Page No. 263 SSR OF 2019-20 ITEN NO.21.37 & PAGE NO.201

Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. Bd.L.4 Page No. 368 SSR OF 2019-20 ITEN NO.32.08& PAGE NO.268

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Bd.L.7 Page No.369 SSR OF 2019-20 ITEN NO.32.11 & PAGE NO.269

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.As directed by Engineer in charges SSR OF 2019-20 ITEN NO.32.34 & PAGE NO.272

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. As directed by Engineer-In- Charge SSR OF 2019-20 ITEN NO.33.68 & PAGE NO.283

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring Bd.M. 12 Page No.385 SSR OF 2019-20 ITEN NO.33.4 & PAGE NO.279

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Bd. M.22 B/Page No. 390 SSR OF 2019-20 ITEN NO.33.35 & PAGE NO.278

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising without box. As directed by Engineer in charge. SSR OF 2019-20 ITEN NO.39.38 & PAGE NO.321

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Bd.U.1 Page No.537 SSR OF 2019-20 ITEN NO.40.01 & PAGE NO.338

Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). BD-T-57 Page No.511 SSR OF 2019-20 ITEN NO.39.26 & PAGE NO.319

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. Bd.P.5 Page No. 413 As directed by egineer in charges SSR OF 2019-20 ITEN NO.36.11 & PAGE NO.291

Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. BASIC RATE AS PER SSR OF 2019-20 ITEN NO.35.19 & PAGE NO.287

ROYALTY CHARGES supply of Rubble, murum, soil, 60mm/40mm metal (Hand broken), royalty charges are not included in the rates. (As per Govt. of Maharashtra, Revenue and Forest Departments Gazette No. 67 Dt. 15 May 2015. States that the royalty charges of Rs. 141.34 /cum) are considered. The surcharges levied on royalty shall also b payable to the E DSR ITEM NO& PAGE NO.

ADD 10 % D.M.F.ON SAND

ADD 2 % SURCHARGES ON SAND

ADD 2 % SURCHARGES ON OTHER MINARALS

Laboratory testing charges are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by vigilance & quality control, circle, for the current year and shall form part of tender testing of material by quality control and certified quality must be use by contractors. Compressive Strength of C.C.cube (Set of 3 cubes)

Add 12% G.S.T.

ADD LABOUR INSURANCE 1%