Rural Development Department Tender

Item No.:-4) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density. Grading II (Using Screening Type B (11.2 mm) Aggregate) Spec No-MORTH-404

Item No.:-5) Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 1.75 kg/sqm, spreading 12mm.size chips compacting with static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates IRC-SP-20, 2002 Clause No. 8.7.3

Item No.:-6) Open Graded Premix Surfacing- Providing and Laying OGC 20 mmthickness composed of 13.2 mm to 5.6 mm aggregates premixed withbituminous binder transported to site with VTS , laid over a previouslyprepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tackand Seal coat. For Bitumen of specified grade--USING drum mix typehot mix plant with SCADA, Paver and Vibratory roller ( Over MPMSurface) (VG-30 bulk bitumen rates are considered to arrive at rates MORTH 510

Item No.:-7) Providing bituminous Type A liquid seal coat on bituminous surfaceincluding supplying all materials and bitumen of specified gradepreparing existing road surface, heating and applying bitumen @ 0.98KgSqm. by mechanical means, spreading chips and rolling, by staticroller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumenrates are considered to arrive at rates)

Item No.:-8) Supplying hard murum/ kankar at the road site, including conveying and stacking complete. DSR P. NO 29/2.29

Item No.:-9) Spreading hard murum/ soft murrum/ gravel or kankar for side width complete DSR P. NO 29/2.30

Item No.:-10) Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. DSR P. NO 29/2.31

Item No.:-11) Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of .9m x 0..60m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with aproved colour shade paint complete, on M.S.angle\of size 20 x 20 x 3 mm frame with properly cross braced M.S.\angles of size 20mmx20mmx3mm duly painted including Two M.S. angle iron posts of size 35 mm x 35 mm x 5 mm, 2.5.00 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 45 cm x 45 cm x 45 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge

Item No.:-12) Test of Metal - Sieve Analysis

Item No.:-13) Test of Hard Murum -Sieve Analysis

Item No.:-14) Penetration Softening Point, Flash and Fire Point

Item No.:-15) Extraction Test

Item No.:-16) Royalty Charges

Item No.:-17)GST Charges