Rural Development Department Tender

Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. (SSR 18-19 Item No.17.37) MORT&H (5th Rev.) 2705, 2706

Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material) (SSR 18-19 Item No.12.70) MORT and H 2200 &-710.1.4 of iRC 78

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. (SSR 18-19 Item No.2.29a)

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete (SSR 18-19 Item No.2.30)

Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt) (SSR 18-19 Item No.11.25) CD.20 Page.No. 169

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (SSR 18-19 Item No.6.36) MORTH 801

Testing Charges CEMENT Standard Consistancy, Fineness, Specific Gravity, Initial Setting Time, Final Setting Time. Compressive Strength, Soundness by Lechatelier Apparatus

Sand Fineness Modulus ( Sieve Analysis ),Silt & Clay Content

40 mm Metal (Hand Broken and Crusher Metal) Water Absorption, Specific Gravity, Impact Value, Crushing Value

Sieve Analysis

Flakiness Index & Elongation Index

Murum Liquid limit & plastic limit

C.C. Cube Crushing Strength C.C. Cube M-10

Crushing Strength C.C. Cube M-15

Compressive Strength C.C. Cube M-20

Royalty Charges