Rural Development Department Tender

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Stee centering formwork, laying / pumping cover blocks, compaction and curing rough ening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc.complete ,with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/ReadyMix cement concrete M-20 of trap / granite/ quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of suffici entminimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc.complete. (Excluding reinforcement and structural steel). with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer / concrete Batchmix plant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite /quartzite/gneiss metal for R.C.C. slabs and landings as perdetailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoot hand even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCAD Aenable dreversible DrumType mixer/ concrete Batchmix plant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position TMT-FE -500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings andschedules. including cutting,bending,hooking the bars,binding with wires or tack welding and supporting as required complete

Providing Laterite stone masonry in cement mortar 1:6 in foundation and plinth including racking out joints when plastering is to be done/striking joints when no plastering is to be done watering and scaffolding.

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cmto 20 cm thick including hand packing and compacting etc. complete.

Providing Laterite stone masonry in cement mortar 1:6 in Super structure including racking out joints when plastering is to be done/striking joints when no plastering is to be done watering and scaffolding.

Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete.

Providing and fixing Country cut teak wood double or single leaf secondclass fully panelled door shutte with 35 mm thick style and rail with 2 5mm thick panels with openable fanlight as per detailed drawings.Excluding the door frame 60 mm x 100 mm stainless steel fixtures and fastening and finishing thewoodworkwith oil painting 3 coats. (Excluding the door frame)

Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, moulding edges, cleaning complete. a) Marble other than white makrana

Providing and fixingin position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38 .10 x 0.90 mm at weight 0.637 Kilogram / One Running Metre.with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram / One Running Metre..Topand side track section 92 x 31.75 x 1.30 mm a weight 0.933 Kilogram /Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram /One Running Metre. Inter locking section 40 x18 x1.10 mm at weight 0.469 Kilogram / Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram / Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon castinging 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screwsand nuts etc,complete.With powder coating without box

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using water proofing compound at 1 Kilogram per cemen tbag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and laying vitrified mattfin in shtiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approvedmake, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.

Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete.

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.

Providing and fixing heavy duty inter locking concrete Grey paving blocks of 80 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete.

Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. Height letter, figures including painting the lefters/figures with approved colour and shade complete

Test Reports - Basic cement test, Compressive strength of CC cube, sand test

Royalty

RCC Design