Rural Development Department Tender

Item No.3. Providing and Laying in situ cement concrete of grade M-15 of trap/ granite / gneiss/ quarzite / graded metal for PCC with or without surface renforce cement / RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spilway crest, spilway downstream face, energy dissipating structures, intake structures, training walls pierrs, abutments, etc. with concrete Mixer shutteringand scaffolding placing comacting, curing with an initial lead of 1km and all lifts etc.Complete.as directed.

Item No. 4 :- Providing casing embanment using selected pervious materil from approved borrow areas ( Govt Acquired Land ) in layers including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor including cost of water etc. complete with lead upto 1 km and all lifts as directed..

Item No. 5. Providing and constructing 230 mm thick dry rubble stone pitching using stones and stone chips from approved source including cost of all material, labour, hand packing / wedging stone chips, finishing etc. complete with lead up to 50 m and all lifts as directed.

Item No.6. Nalla Regradation including excavation in soil, silt lime, shadu, soft murum , hard murum ( Machinary rate only, ) and stacking / dressing the material by public particience as directed with al leads and lifts etc.Complete.

Item No. 7 :- Providing & Fixing Information Board of 1.2 x 0.75 m prepared on 16 guage M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white background and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 x 60 x 75 cm as directed by Engineer - in - charge.