Rural Development Department Tender

Providing internal cement plaster 20 mm thick in two coat in cement mortar 1:5 without neeru finish to concrete brick surface. In all positions including scaffolding and curing complete. Bd.L.2. Page No.368 ITEM NO. 32.06 & PAGE NO. 260

Providing structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings includfixing fixing in position without connecting plates, braces etc. and three coats of oil painting complete. Bd.C.2 Page No.275 (DSR ITEM NO.23.01 & PAGE NO.214)

Providing and fixing colour coated Zincalume (R) AZ150 (Min 150 gms/sq.mt. total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45mm Base Metal thickness (BMT) (0.5mm TCT), Histrength steel with min 550 MPa yield strength, metallic hot dip coated with Aluminium- Zinc alloy (55% aluminimum 43.4% Zinc 1.6% sillicon) with Coloured (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface. Profile sheet shall have nom. 950-1050 mm effective effective cover width and nominal 25-30 mm deep ribs with subtle square flutting in the five pan at nominal 180-250 mm center-to center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min 25 um Zinc Tin alloy coated Hex head self-drilling screw etc. (Spec No.As directed by Engineer in charge.(DSR ITEM NO.38.36 & PAGE NO.253)

Providing and fixing steel frame door of angle 50 mm X 50 mm X 6 mm with mild steel bars 16 mm dia horizontally at 10 mm c/c for ventilator portion icluding iron hold fast boxes for fixing shutter including welding , finishing , paining etc.complete . Spec.No. As directed by Engineer in charge DSR I. NO. 39.35 & PAGE NO.266)

ITEM NO.16 Providing and fixing in position mild steel door / window shutters including mild steel angle frame of size 25 X 25 X 5 mm for fixing mild steel sheet 24 gauge including welding fixing to frame and all necessary fixtures including electrostatic powder coating etc. complete. Spec.No. As directed by Engineer in charge DSR 201617 ITEM NO. 306 & P. NO.83

Provinding and applying two coats of lead/ zinc base oil painU bituminous paint of approved colour to new structural steel work and iron work in building including preparing scaffolding if necessary cleaning and preparing the surface (excluding primer coat) comp. Spec. No. :Bd.O.3 Page No. 404 (DSR I. N0.35.04 P.N0.280)

Providing and laying Rough Shahabad Stone Flooring 25 mm. to 30 mm. thick ln plain/ diamond pattern on a bed of 1: 6 cement mortar including cement float, filling joints,Pointing in cement mortal 1:3 curing, polishing and cleaning complete. Spec No.BM.1 PAGE NO.379 (DSR I.NO.33.01 P.NO.265

Royalty chages for material

a) Additional 10 % royalty charges for District Wellfare fund

Laboratory testing charges are not considered in Concrete : Compessive Strength of C.C.Cube

ADD 18 % G.S.T.on work cost

ADD 1% LABOUR INSURANCE ON WORK COST

B) PROVIDING AND ERECTING OF WATER PLANT A) Providing and Errecting of R.O.Plant providing and errecting water Treatment plant (R.O) 1000 liter per hour capacity incorporated with sand filter carbon filter ,Annti scalant dozing ,RO pre micron filter R.O syster U.V.system Raw water storage tank 2000 Liter,Traeated water storage tank 1000 liter ,filter feed pump ,Ra water pump,pressure sand filter ,high pressure pump A.T.M system ,all components of R.O plant will be fitted on full size SS skid etc.complete as per details and specifiication ANNEXTURE enclosed herewith

ITEM NO.2 Angle frame Providing and errecting M.S.angle stand in angle size 40 mm *40mm*4mm think for pure water tank including cutting drilling ,welding ,rivetting and painting etc.complete (PWD DSR 2018--19 page no.115)40mm*40mm*4 mm thick M.S.Angle . A) 1.10 mtr *8Nos =8.80 Rmtr B) 0.50 mtr *4Nos =2.00 Rmtr C) 1.05 mtr * 4 Nos =4.20 Rmtr Total =15.00 Rmtr Wt @ 2.25 Kg/Rmtr=33.75 kg

Ad GST 18 % AS PER