Rural Development Department Tender

providing and laying in situ cement concrete of grade M-15 of trap/granite/ gneiss/ quartzite/graded matal for pcc with or without surface reinforcement/RCC concreting requiring heavy or special type of shutterung for work of gallery sluice spillway crest spillqay downstream face encergy dissipating structure

providing pointing with cement mortar for stone maonry including racking joint caffolding curing excluding royalty of material etc complete.

providing casing embankment using selected perviou material from approved borrow areas in layers including cost of all materials machinery labour all other operations such as collection of soil spreading soil in layer of specified thickness sorting out breaking clods levelling ectioning edges/sides watering compacting each layer to denity control of not less than 95 percent or as stipulated using vibratory compactor etc complete with lead up to 1 km and 6 m lift

Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips, finishing etc complete with lead up to 50 m and all lifts as directed.

providing and fixing inposition Tor Steel reinforcement bars as per desigen including laying cutting bending hooking binding with G. I wire etc complete as directed with lead of 50m and lift of 1.5m

Manufacturing with QAP & fabrication of KT weir needle gate straight type size 2.15x 0.5 m94 Kg weight as per relevant Indian Standards withall material Mild steel confirming to Is 2062 Rubber seal cofirming to Is 4623 & Welding electrodes Labour charge machinery charge 1km lead charges of transportation loadong and unloading charge of Gate parts at Site InSpection & Quality control charge Sand blasting Paintiong with one coat of Zine rich primer on dry film to give total dry film thickne 70 +/-5 microns and 2 coat of loventles coal

providing and applying Primer Red Oxide paint in two coat including urface preparation chipping the welding cleaning patter dut etc complete.

providing and fixing rubber seal (Size 60x20mm) for ms gate including cutting laying in position tying with nut and bolt work a per detailed design etc.

providing structural steel (ISEB 150 x 100 mm) in rolled ections like joits angle etc a per detailed drawing and design including dixing in position with hold fasts including one coat anicorroive p aint etc complete.

Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 x 60 x 75 cm as directed by Engineerin-Charge