Rural Development Department Tender

Providing and laying cast in situ/Ready mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete work in foundation like raft ,strip foundations ,grillage and footings of RCC Columns and steel stanchions etc including bailing out water centering,formwork,cover block,laying /pumping,compactionand rougheningthe surface if special finish is to be provided and curing etc complete.( Excluding reinforcement and structural steel ) with fully automatic micro processor based PLC With SCADA enabled reversible Drum type mixer/concrete Batch mix plant etc complete with natural sand/V.S.I quality artifical sand P.No.38 ) Spec No.: Bd.F.3 Page No.298 and B.7 Page No.38

Providing and laying in situ/Ready mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawings, including, centering , from work , compacting finishing the formed surface with cement mortor 1:3 of sufficient minimum thickness to give a smooth and even surface and roughening the surface if special finishing to be provided and curing etc complete (Excluding reinforcement and structural steel ) with fully automatic micro processors based PLC with SCADA enabled reversible Drum Type Mixer /concrete Batch mix plant etc complete ) (7.60 Bag/cum) P.No.38 ) Spec No.: Bd.F.7 Page No.300

Providing and laying cast in situ/ Ready mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete beams and lentels as per detailed designs and drawings, including, centering , from work ,cover blocks,laying /pumping compact or roughening the surface if special finishing to be provided and curing etc complete (Excluding reinforcement ) with fully automatic micro processors based PLC with SCADA enabled reversible Drum Type Mixer /concrete Batch mix plant etc complete ) P.No.38 ) Spec No.: Bd.F.6 Page No.300 and B.7 Page No.38

Providing and laying cast in situ/Ready mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete Chajja as per detailed designs and drawings, including, centering , from work , cover blocks,laying/pumping compacting finishing or roughining if special finishing to be provided and curing etc complete (Excluding reinforcement ) with fully automatic micro processors based PLC with SCADA enabled reversible Drum Type Mixer /concrete Batch mix plant etc complete ) with natural sand /V.S.I quality Artifical sand P.No.38 ) Spec No.: Bd.F.9 Page No.303

Providing and laying cast in situ/Ready mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete waist slabs and landings as per detailed designs and drawings, including, centering , from work , cover blocks,laying/pumping compacting finishing the formed surfaces with cement mortor 1:3 of sufficient minimum thickness to give a smooth and even surface or roughining if special finishing to be provided and curing etc complete (Excluding reinforcement ) with fully automatic micro processors based PLC with SCADA enabled reversible Drum Type Mixer /concrete Batch mix plant etc complete ) P.No.20 ) Spec No.: Bd.F.8 Page No.302

providing and fixing in position T.M.T.FE-500 bar reinforcement of various diameters for reinforced cement concrete pile caps, footing,foundations,slabs,beams,columns,canopies,stair case,newels,chajjas,lintels pardis, copings, fins, arches etc.as per detailed designs drawings and schedules including cutting bending , hooking the bar bindind with wires or tack wilding and supporting as required complete TMT steel from other plant completed as per detailed designs drawings spec. No Bd.F.17 page no 306

providing second class Burnt brick masonry with conventional / indian standard type bricks in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of inner walls including billing out water manually strikinking joints on unexposed faces raking out joints on exposed faces and watering complete (a) by using second class brunt brick Spec.No.:Bd.G.1 Page No .313

filling in plinth and floors with approved excavated material in 15 cm to 20 cm layers including watering and compaction etc complete page no 12 spec no :Bd.A.10 page No.262

providing second class Burnt brick masonry with conventional / indian standard type bricks in cement mortar 1:6 in superstructure including striking joints raking out joints watering and scaffolding complete :Bd.G.5 page No.315

Providing second class Brunt bricks masonry with conventional / I.S type bricks in cement mortor 1:4 in half bricks thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter/2 hoop iron strips 25 mm x 1.6 mm placed at every third course properly bent and bonded at ends scaffolding racking out joints and watering etc complete Bd.G.7 Page No.316

Providing and fixing frame with /without ventilator of size as specified with country cut NON teak wood for doors and windows including chamfering ,rounding ,rebating ,iron holdfast of size 300 mm x 40 mm x 5 mm with oil painting etc complete as directed

Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size , crossing of ms flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange , M.S flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G 150 fitted with snap headed rivets of minimum size 6 mm max spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossing with hold fasts , stoppers spaces , handles , locking arrangement and one coat of lead primer & oil painting etc complete

Providing and fixing 30 mm thick Both side Prelaminated Solid Panel PVC Door Shutter consisting of frame made out of M.S tubes of 19 guage thickness and size 19 x 19 mm for styles and 15 x 15 mm for the top and bottom rails M.S Frame for the top and bottom rails M.S frame shall have a coat of metal primer of approved make and manufacture M.S frame shall be covered with heat mouled PVC C channel made for 5 mm (+ / 0.25 ) thick prelaminated sheet of density 600 kg / cbm of size 30 mm thickness 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 angle on either side forming stiles and 5 mm thick 95 mm wide PVC sheet out of which 75 mm shall be fait and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be fait and 20 mm shall be tapered on both sides to form lock rail Top Bottom and lock rail shall be provided either side of the panel an additional 5 mm thick PVC strip of 20 mm width is to be stuckon the bottom side of the C channel prelaminated paneling of 5 mm

Providing and fixing mild steel grill work for windows , ventilators etc 20 kg / sqm as per drawing , ventilators etc 20 kg / sqm as per drawing including fixtures , necessary welding & paintining with one coats of anticorrosive paint & two

providing internal cement plaster 6 mm thick in single coat in cement mortor 1:4 without neeru finish to concrete or bricks surfaces in all position includings scaffoldings and curring etc complete

providing internal cement plaster 20 mm thick in two coat in cement mortor 1:5 without neeru finish to concrete or bricks surfaces in all position includings scaffoldings and curring complete spec.No:Bd.L.4 Page No.368

Providing sand faced plaster externally in cement mortar using approved screened sand ,in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 curing for fourteen days scaffolding etc complete

Providing and fixing Orissa type white glazed earthen ware 575 mm water closet pan including S trap with earthen ware foot rests cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its

Providing laying and fixing P.V.C pipe of 110 mm dia with fittings such as bends , fees ,reducers ,clamps etc.including necessary excavation ,trench ,filling etc complete including removing existing pipe line necessary and conveying and stacking the same in PWD chowky or as directed etc complete

Providing and fixing coloured glazed earthenware wash Hand Basin of 45 cm x 30 cm size including cold water piller tap/cold and hot water piller tap brackets , rubber plugs and brass chain , top and necessary pipe connection including PVC waste pipe and trap up to the outside face of the wall Making good the damaged surface testing etc complete

Providing and fixing H.D.P container syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery upto destination hosting and fixing of accessories such as inlet ,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 litersSpec.No.As directed by engineer in charge

Providing and fixing on walls / ceiling /floor 20 mm dia CPVC pipe with necessary fittings remaking good the demolished portion etc complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc complete

Providing and fixing 10 cm C.I Nahani Trap Including C.I grating bend and piece of C.I pipe upto the outside face of the wall complete

Providing and fixing 15 mm dia screw down bib/ stop tap of brass including necessary socket

Providing and laying cast in situ/Ready mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete waist slabs and steps of staircases as per detailed designs and drawings, including, centering , from work , cover blocks,laying/pumping compacting finishing the formed surfaces with cement mortor 1:3 of sufficient minimum thickness to give a smooth and even surface or roughining if special finishing to be provided and curing etc complete (Excluding reinforcement ) with fully automatic micro processors based PLC with SCADA enabled reversible Drum Type Mixer /concrete Batch mix plant etc complete ) P.No.20 ) Spec No.: Bd.F.8 Page No.302

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS 15622-2006 of approved make , shade and pattern for for flooring in required positions laid on a bed of 1:4 cement mortar float , filling joints , curing and clearing etc complete

Providing and fixing soild core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings wth wrought iron hold fast,stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete

Providing and fixing in position ( as per I.S 1868 / 1982 ) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg /Rmt Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt and handle section 40 x18 x 1.25 mm at weight 0.417 kg/Rmt and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt As per detailed drawings and as directed by Engineer in charge with all necessary Aluminum sectins fixtures and fastenings such as roller bearing in nylon casting and self locking satch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc complete with powder coating without box

ROYALTY charges :- Supply of Rubble ,Murum , Soil, 60 mm / 40 mm metal ( Hand Broken )

Add 10 % Of Roylty For surcharge

Laboratory testing charges are not considered in the Rate Abstracts where ever required separate iteam shall be taken in the estimate for material testing charges fixed by vigilance & Quality control circle for the concrete A) compressive strength of c.c cube ( Set Of 3 Cubes)

PART || Add 12 % for Goods And Service Tax Cost on work

Add 1 % Labour Insurance