Rural Development Department Tender

Item No. 4: Excavation in Hard Murum including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated material neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead upto 15 m and all lifts as directed.complete as directed

Item No. 5: Providing and laying in situ cement concrete of grade M-10 (40 MSA) of trap/ granite / quartzite / graded metal for foundation and bedding with Concrete Mixer including placing, compacting, curing etc. complete with an initial lead of 1 km & all lifts as directed. (B) M-10 (40 MSA) (Cement 4.40 bags/Cum)

Item No. 6: Providing, fabricating and placing in position reinforcement steel for RCC works including cutting, bending, hooking, laying in position and tying M.S./ HYSD / TMT bars for reinforcement of R.C.C. work as per detailed drawing etc. complete as directed. 8 mm

Item No. 7: Providing and laying in situ cement concrete of grade M-15 ( 40 MSA ) of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement / RCC concreting requiring heavy or special type of shuttering for works of gallery , sluice , spillway crest , spillway downstream face , energy dissipating structures , intake structures , training walls , piers , abutments etc. with concrete mixer considering lead of 50 m with shuttering and scaffolding , placing , compacting , curing etc. complete with an initial lead of 1 km & all lifts as directed.

Item No. 8: Providing and laying in situ cement concrete of grade M-15 ( 20 MSA ) of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement / RCC concreting requiring heavy or special type of shuttering for works of gallery , sluice , spillway crest , spillway downstream face , energy dissipating structures , intake structures , training walls , piers , abutments etc. with concrete mixer considering lead of 50 m with shuttering and scaffolding , placing , compacting , curing etc. complete with an initial lead of 1 km & all lifts as directed.

Item No. 9: Back filling up to ground level behind the canal structures etc. complete ( without royalty ) with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc. complete.

Item No. 10: Providing and fixing M. S. channels of 125x65 mm of approved quality with all fixtures etc. complete as directed by the Engineer-in-chage & as per Specification

Item No. 11: Manufacturing with QAP & fabrication of KT weir needle gates - straight type size 2.15 x 0.5M- 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177.

Item No. 12: Providing and constructing 230 mm thick dry rubble stone pitching using stones and stone chips from locally available, excavated materials including labour, hand packing / wedging stone chips, finishing etc. ,complete with lead up to50 m and all lifts.

Item No. 13: Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-in-charge.