Rural Development Department Tender

Providing second class burnt brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth of external walls including bailling out water manually, striking joints, on unexposed faces, racking out joints on exposed faces and watering, excetra complete. (using NATURAL SAND). Item / Page No : 1 / 197 Specification No : Bd.G.1 Spec. Page No : 313 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing internal cement plaster 20 milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete, brick surface, in all positions including scaffolding and curing, excetra complete. (For Ground Floor) (using NATURAL SAND). Item / Page No : 7 / 209 Specification No : Bd.L.4 Spec. Page No : 368 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and fabricting structural steel work in rolled sections like joists, channels, angles, tees, excetra as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted / welded connections without connecting plates, braces, excetra and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade, excetra complete. (For Ground Floor) Item / Page No : 1 / 173 Specification No : Bd.C.2 Spec. Page No : 275

Providing and fixing corrugated galvanised iron sheets of 0.63 milimetre thick (24 B.W.G) for roofing without wind tiles including fastening with galvanised iron screw and bolts and lead / bitumen washers as per drawing, excetra complete. (Weight 5.5 killogram per square metre) (For Ground Floor) (For Ground Floor) Item / Page No : 4 / 233 Specification No : Bd.R.5 Spec. Page No : 452-453

Providing and fixing factory made steel windows constructed of skin pass galvanized iron sheet (as per Indian Standard : 513 “D" quality, galvanized as per Indian Standard : 277 with hot zinc coating of 120 gram / square metre and thickness of 0.6 milimetre) with a) Window shutter of 0.6mm thick skin pass galvanized iron sheet. b) Window frames of 0.8m thick skin pass galvanized iron sheet of size 80 milimetre X 45 milimetre c) Mullion of 0.8 milimetre thick skin pass galvanized iron sheet of size 80 milimetre X 60 milimetre d) Vision glass of 4 milimetre clear float glass in rectangular shape. e) Finish : Coated with zinc phosphate primer or thermosetting polyurethane paint of Aliphatic grade providing high levels of scratch resistance and durability. f) mild steel grill of 10 milimetre square mild steel bright bars. g) Accessories : stainless steel pin type hinges — 1 Set; polypropylene, handle — 1, friction stay powder coated – 1, mild steel powder coated tower bolt — 2 Ethyl Propylene Diamine Monomer gasket should be used all around glass in shutter for fixing of glass; corner brackets — 4 (made of polypropylene each per shutter and frame) complete. (For Ground Floor) Item / Page No : 99 / 377 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing factory made steel door of single leaf internal plain steel finish type with a) frame of size 100 milimetre X 58 milimetre conforming to Indian Standard : 4351-2003, 1.2 milimetre thick pre-galvanized sheet with mitred and welded cones, frame stretches, hinge reinforcing plates, fixing plates and hardware mounting plates and polyurethane foam infill. b) Shutter of thickness 46 milimetre made of 0.8 milimetre thick slip coated pre-galvanized steel sheet on both sides conforming to ASTM A527 / ASTM A525, British Standard 2989 1994, Indian Standard 277, zinc coating 120 grams per square metre. Lock formed panels with internal stiffeners of 3 milimetre thick made of galvanized sheet, 3 milimetre thick hinge reinforcing hardware mounting plates and lock protection with honeycomb craft paper infill of thickness 150 grams per square metre of load bearing capacity 500 Kg/Sqm. c) Finish : Powder coated surface finished with thermosetting polyurethane paint of Aliphatic grade of thickness 60 micron. d) Accessories : Minimum 8 anchor fastener of HILTI make, minimum 3 stainless steel ball bearing butt hinges of Dorset make, Dorset Mortise lock, stainless steel Tower bolt of 200 milimetre size, eye hole, door stopper, complete. (For Ground Floor) Item / Page No : 95 / 376 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Royalty charges for natural sand which is used for government bonafied works and for which Royalty charges are to be paid by the contractor. (This Item is to be paid to the contractor only after he pays the Royalty amount to Revenue department and produces the required voucher.) Item / Page No : 3b / 0 Additional Specifications : 1. Government of Maharashtra, Revenue and Forest Department Gazette Number 146 Dated 04/06/2021 and Government of Maharashtra Public Works Department State Schedule of Rates 2021-22 General Note Number A(v), Page 5. 2. The amount of royalty charges will be paid only after submission of the receipt in original from Revenue authority for payment of royalty to Government, stating the name of work. 3. Above / below percentage quoted by the contractor will not be applicable for this item.

GST Charges 18% Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Colouring and Repairing to Gaothan & Kadam Wasti ZP School At - Akumbhe, Tal - Madha, Dist - Solapur

Providing and fixing factory made steel door of single leaf internal plain steel finish type with a) frame of size 100 milimetre X 58 milimetre conforming to Indian Standard : 4351-2003, 1.2 milimetre thick pre-galvanized sheet with mitred and welded cones, frame stretches, hinge reinforcing plates, fixing plates and hardware mounting plates and polyurethane foam infill. b) Shutter of thickness 46 milimetre made of 0.8 milimetre thick slip coated pre-galvanized steel sheet on both sides conforming to ASTM A527 / ASTM A525, British Standard 2989 1994, Indian Standard 277, zinc coating 120 grams per square metre. Lock formed panels with internal stiffeners of 3 milimetre thick made of galvanized sheet, 3 milimetre thick hinge reinforcing hardware mounting plates and lock protection with honeycomb craft paper infill of thickness 150 grams per square metre of load bearing capacity 500 Kg/Sqm. c) Finish : Powder coated surface finished with thermosetting polyurethane paint of Aliphatic grade of thickness 60 micron. d) Accessories : Minimum 8 anchor fastener of HILTI make, minimum 3 stainless steel ball bearing butt hinges of Dorset make, Dorset Mortise lock, stainless steel Tower bolt of 200 milimetre size, eye hole, door stopper, complete. (For Ground Floor) Item / Page No : 95 / 376 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing factory made steel windows constructed of skin pass galvanized iron sheet (as per Indian Standard : 513 “D" quality, galvanized as per Indian Standard : 277 with hot zinc coating of 120 gram / square metre and thickness of 0.6 milimetre) with a) Window shutter of 0.6mm thick skin pass galvanized iron sheet. b) Window frames of 0.8m thick skin pass galvanized iron sheet of size 80 milimetre X 45 milimetre c) Mullion of 0.8 milimetre thick skin pass galvanized iron sheet of size 80 milimetre X 60 milimetre d) Vision glass of 4 milimetre clear float glass in rectangular shape. e) Finish : Coated with zinc phosphate primer or thermosetting polyurethane paint of Aliphatic grade providing high levels of scratch resistance and durability. f) mild steel grill of 10 milimetre square mild steel bright bars. g) Accessories : stainless steel pin type hinges — 1 Set; polypropylene, handle — 1, friction stay powder coated – 1, mild steel powder coated tower bolt — 2 Ethyl Propylene Diamine Monomer gasket should be used all around glass in shutter for fixing of glass; corner brackets — 4 (made of polypropylene each per shutter and frame) complete. (For Ground Floor) Item / Page No : 99 / 377 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and applying two coats of waterproof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surfaces, watering for two days, excetra complete. (For Ground Floor) Item / Page No : 13 / 224 Specification No : Bd.O.8 Spec. Page No : 406

GST Charges 18% Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.