Rural Development Department Tender

Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc. by blasting/ controlled blasting, chiseling as required in wet or dry condition for Supply Well for lift 0 to 1.50 M and lead of 150 M including barricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km as directed by Engineer-In-Charge, etc. complete excluding refilling. Lift 9.00.to 10.50 M

Lift 10.50.to 12.00 M

Item No.3:

Providing and laying in situ following grade of C.C. of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including dewatering, formwork, compacting and curing, finishing etc. complete. PCC 1:2:4 (M-150)

Item No.4:

Providing and casting in situ following grade of C.C. of trap/ granite/ quartzite/ gneiss metal of approved quality for R.C.C. works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, formwork, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. a) Foundation Beam (M-200) Lift 10 to 15.0 M

b) Vertical Wall (M-200) Lift 0.00 to 5.00 M Above & Below GL

Lift 5.00 to 10.00 M

Lift 10.00 to 15.00 M

Item No.5:

Providing and fixing in position steel bar reinforcement of various dia. for R.C.C. piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, Chajjas, lintels, Pardies, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete. (Including cost of binding wire) Lift 0.00 to 5.00 M

Lift 5.00 to 10.00 M

Lift 10.00 to15.00 M

Item No.6:

Dewatering the excavated trenches and pools of water in the building/ trench area by using pumps and other devices including disposing of the water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel) etc. complete.

Item No.7:

Providing & fixing in well Steining, 80 mm dia A.C/PVC pipe weep holes 1.5 M c/c staggered, pipe sloping outside well Steining so as to prevent sand coming along with water current including cost of all jointing materials and labour involved with all leads and lifts etc.

Item No.8:

Providing lowering Laying and placing in position shrouding material for porous pipe gallery/slotted gallery/well work with all leads and lifts involved including transportation of materials to site of works, screening and washing of materials and placing in position with given section. Complete.(Boulder +Sand filling) 30% Sand filling

100% Boulder filling

Item No.9:

Filling in plinth and floors/ trenches with approved excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction complete.

Item No.10:

Providing & fixing pulley for drawing water from well etc. complete and as directed by Engineer-in-charge.

Item No.11:

Providing and fixing Road junction / Information sign board of size 1.20 m x 0.90 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 5 mm with cross bracing of size 35 x 35 x 5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral /arrows, coated with non pealable crystal clear protective transperent coat retaining 100% reflection includingtwo angle iron post of size 65 x 65x 6 mm of 3.65 m. long inflated at bottom drilled on top and painted in whiteand black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with M-20 cement concrete of 60 cm x 60 cm x 75 cm size as directed by Engineer-in charge etc. complete. Mild Steel sheet with Engineering grade.