Rural Development Department Tender

Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means.

Filling in plinth ad floors murum beddig in trenches with approved murum from excavated materials from foundation 15 cm. to 20 cm. layers including watering ad compaction complete.

Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). PVC 90 mm 6 Kg pipes

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 80 mm dia SV PN 1

Providing ISI standard R.C.C. pipes in standard lengths f following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev- ied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988. 200 mm dia NP III pipe

Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint). PVC 90 mm 6 Kg pipes

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) 80 mm dia SV PN 1

Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, etc. complete as directed by Engineer- in-charge (For all class of pipes.) as per IS- 783-1985. 200 mm dia NP III pipe

Providing and fixing C.I. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete. 100 mm x 225 mm (20 kg)

Hydraulic testing of PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. PVC 90 mm 6 Kg pipes

Refilling the trenches with available excavated stuff with soft material first over pipe lie and then hard material I 15 cm. layers with all leads and lifts including consolidation, surcharging, etc. complete.

Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line. (The number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores.) 80 mm dia

Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. 25 mm dia

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). 25 mm dia

Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. Complete as per IS-1239/2004. 100 mm Dia B Class G.I. Pipe

80 mm Dia B Class G.I. Pipe

Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge. 100 mm B class

80 mm B class

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete

SUB WORK NO 2 :- RCC ESR Cap 15,000 Ltr. H = 8 m, Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers, water level indicators, lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, M.S. grill gate of 2 M height with locking arrangement of approved design, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti-termite treatment for underground parts of the structure and giving satisfactory water tightness test as per I.S. code. The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-Charge. Cap 15,000 lits staging 8 m Notes :- 1) The design of the srtucture be in accoradance with relevant I S specification ( I S 3370 - 1965 or revised ) 2) The design shall satisfy the stipulations as per I S 1893 - 1984 and I S 13920 / 1993 for seismic force and I S -11682 / 1985 for RCC staging of overhead tanks. 3) For design having more than 6 columne,provision of internal bracing is obligatory.External bracings is also obligatory. 4) The entire structure shall be in M - 300 mix only. 5) Plain round mild steel bars grade-I confirming to I S 432 part-I or high yield strength deformed bars confirming to I S 1786 or I S 1139 shall be used,grade- II mild steel bars will not be allowed. 6) Irrespective of the type of foundation proposed in the design,one set of bracing be provided at the ground level. 7) These rates include providing M S ladder for E S R s upto 2 lakh litres capacity and providing spiral staircase for E S R above 2 lakh litres capacity. 8) Staging shall have to be designed with stresses of M- 200 concrete for ESR. However all RCC construction should be done in M-300. 9) These rates are including the cost of uplift pressure if any and entire dewatering during execution. In case of water logging area where water is stretch at shallow depth,extra provision of dewatering shall be made as per site condition. 10) All conditions given in the Member Secretary's Circular No. MJP/ TS-I/350/1668 dt.2-8-97 and MJP / S-I/350/2127 dt. 13-7-99 shall be strictly followed and additional cost,if any,due to these conditions is included in the rates mentioned below. 11) 75% part rate shall be payable for reinforcement concrete and plastering items of containers of ESR till satisfactory hydraulic testing for water tightness is given; and till that work shall be treated as incomplete.

Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores, unloading etc. complete as directed by Engineer-in-charge. CID/F Pipes 100 mm dia

80 mm dia

Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmen- tal store, unloading stacking etc. complete. D/F specials 80 to 300 mm dia

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. CI / DF Sluice Valve 100 mm dia

80 mm dia

S/ W No. 3 - Distribution System Excavation for foundation or pipe trenches in earth soils of all types, sand gravel and soft murum including removing the excavated material upto a distance of 50 m and lifts as below, stacking and spreading as directed, normal dewatering, Preparing the bed for foundation and excluding backfilling etc. complete.

Excavation for foundation / pipe trenches in hard murum & boulders, WBM road including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means.

Filling in plinth ad floors murum beddig in trenches with approved murum from excavated materials from foundation 15 cm. to 20 cm. layers including watering ad compaction complete.

Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). PVC 110 mm 4 Kg pipes

PVC 90 mm 4 Kg pipes

PVC 75 mm 4 Kg pipes

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 100 mm dia SV PN 1

80 mm dia SV PN 1

65 mm dia SV PN 1

Providing ISI standard R.C.C. pipes in standard lengths f following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev- ied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988. 200 mm dia NP III pipe

Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint). PVC 110 mm 4 Kg pipes

PVC 90 mm 4 Kg pipes

PVC 75 mm 4 Kg pipes

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) 100 mm dia SV PN 1

80 mm dia SV PN 1

65 mm dia SV PN 1

Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, etc. complete as directed by Engineer- in-charge (For all class of pipes.) as per IS- 783-1985. 200 mm dia NP III pipe

Providing and fixing C.I. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete. 100 mm x 225 mm (20 kg)

Hydraulic testing of PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. PVC 110 mm 4 Kg pipes

PVC 90 mm 4 Kg pipes

PVC 75 mm 4 Kg pipes

Refilling the trenches with available excavated stuff with soft material first over pipe lie and then hard material I 15 cm. layers with all leads and lifts including consolidation, surcharging, etc. complete.

Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line. (The number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores.) b)100 mm dia

c)80 mm dia

Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete 25 mm dia.

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). 25 mm dia

Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. Complete as per IS-1239/2004. 100 mm Dia B Class G.I. Pipe

80 mm Dia B Class G.I. Pipe

65 mm Dia B Class G.I. Pipe

Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge. 100 mm B class

80 mm B class

65 mm B class

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete

Sub Work No. 4 :- Running The Scheme For One Months Commisioning running and maintaining the scheme to quantites, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and 3 months for regional scheme, together with training of personnel spared by MJP/ Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. Note. : Required chemicals to be supplied by Grampanchayat free of cost and electricity bill will also be paid by the Grampanchayat. For Single Village ( 1 months)

Add GST 12%