Rural Development Department Tender

Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 m, not less than 97% of standard Proctor density after laying them in layers of 20 cm. to 30 cm. with Power roller.(E CSR Item No.2.24)

Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . a)80 mm Metal, By breaking Boulders (Hand broken).

Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . a)40 mm Metal, By breaking Boulders (Hand broken).

Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . Item no. 50.58

Supplying Soft Murum at the road site, including conveying and stacking complete. (E CSR Item No.2.29 b ) (Reference No.MORTH 408) (Additional Specification..MORTH 408

Compacting the hard murum /kankar for all width (200 mm loose) l with Static roller including necessary, labour, materials and artificial watering complete.

Compacting the sub grade/gravel/oversize metal (200mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete.

Compacting the sub grade/gravel/oversize metal (100mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete.

Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal+ 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 1.75 kg/sqm, spreading 12mm.size chips compacting with static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates)

Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.VG­30 bulk bitumen (E CSR Item No.3.3) (Reference No.MORTH 503)

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) (E CSR Item No.4.12) (Reference No.MORTH 511

Providing and laying of Type - B premix seal coat with HMP of approprate crushed stone chipping 6.70 mm size and penetration bitumen of specified grade @ 0.68 Kg / Sqm. , preparing existing road surface including mixing in suitable Batch Mix plant and rolling by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) (E CSR Item No.4.03) (Reference No.MORTH 513

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. (E CSR Item No.2.29) (Reference No.MORTH 408) (Additional Specification..MORTH 408 )

Spreading hard murum for side width etc. complete (E CSR Item No.2.3) (Reference No.MORTH 408) (Additional Specification..MORTH 408 )

Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete. (E CSR Item No.2.31) (Reference No.MORTH 408) (Additional Specification..MORTH 408 )

Providing and laying cement concrete pipe of IS458:2003NP-2classof1000 mm diameter in proper line,level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (E CSR Item No.6.36) (Reference No.MORTH 801) (Additional Specification..MORTH 801

Royalty of Metal & Murum

80 mm H B Sieve Analysis

80 mm Water Absorption,Specific Gravity,Inpact Value / Crushing Value

40 mm H B Sieve Analysis

Sieve Analysis 40 mm H.B Metal

Sieve Analysis- Tests for 40 mm Crusher Broken

Add for Material Testing Charges for Bitumen Penetration , Softening Point, Flash and Fire Point , Specific Gravity - Tests

Add for Material Testing Charges for OGC 20 mm thick Sieve Analysis for 10 to 12 mm metal CR

Add for Material Testing Charges for Mix Metal- Extaction - Tests

Add for Material Testing Charges for Hard Murum Sieve Analysis- Tests