Rural Development Department Tender

Item No. 4:- Providing uncoursed rubble masonary of trap stone in cement morter 1:6 in foundation and plinth of inner wall, including bailling out water manually striking joints on un exposed faces and watering etc. comp.

Item No. 5:- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Item No. 6:- Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Item No. 7:- Providing Second Class Burnt Brick masonry with coverntional/l.S type bricks in cement mortar 1:6 in superstructure, including striking joints, racking out joints, watering and scaffolding etc. complete.

Item No.8:- Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed design and drawings or as directed by Engineer-in-Charge, including cutting, fabricating, hoisting, etc comp.

item no 9-Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)

item no 10- Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.).

item no 11-Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing,cleaning complete. b) Granite

Item No.12:-Providing cement plaster 20 mm thick in single coat in C.M. (1:4) in single coat without neeru finishing to the concrete or brick surface in all positions including scaffolding curing etc.

Item No.13:-Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete.

Item No.14:-Providing sand faced plaster externally in cement mortar using good sand in all positions including base coat of 15mm thick in C.M 1:4 kg per cement bag curing the same for not less that 2 days & keeping the surface of the base coat rough enough to receive the sand faced treatment 6 to 8 mm thick in C.M out grains &curing for fourteen days scaffolding etc. complete.

Item No.15:-Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complet.

ITEM NO 16Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.

ITEM NO 17-Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box.

Item No.18:- Providing & fixing solid core flush door shutter in single leaf of 32 mm thick, decorative type of exterior grade as per detailed drawings or as approved face veneer on both faces venitians, all necessary beads, moulding & lippong, brass oxidized/ alluminium with powder coating fixturee & fastenings without mortise lock chromium plated handles on both sides & finishing wth French polishing etc. complete (Without frame)

Item No.19:-Providing & fixing mild steel grill work for windows, ventilators weighing 15.00kg per Sq.m. as per drawing, including necessary extures, welding & painthing with one coat of anti corrosive paint etc com.

Item No.20:-Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.

ITEM NO 21-Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.

Item No.22:-Providing and applying two coats of Water proof cement paint of approved manufacture & of approved colour to the plaster surface including scaffolding if necessary, cleaning and preparing the surface watering of two days complet.

Item No.23:-Providing access ramp of 1.00 M. width in brickwork / I.P.S. flooring with M.S. hand railing at both side as per drawing.

Item No.24Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete

Item No.25:- Quality control Testing report 1 ) Cement - Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.

2)Bricks-Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence

C C CUBES CONCREATE

C C CUBES CEMENT MORTAR

PARTEX TILES

Item No.25:- Disbusment of Ryalti charges for construction material like Metal,Rubble,Murum,and Earth etc. complete.

Add 18% for gst

Add 1% for sqm Charges

Add 0.5% for labour insurance