Rural Development Department Tender

Item No.4 Providing at site of work ISI standard RCC slotted pipe of NP - 3 class including cost of all central and local taxes, octroi, inspection, trasportation, etc. complete including cost of RCC collar etc. complete. 600 mm dia

Item No.5 Lowering, laying and jointing RCC slotted pipe of following diameters including all leads and lifts, cost of jointing material, labour, etc. complete. 600 mm dia

Item No.6 Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance….. etc. complete.

Item No.7 Providing, lowering, laying and placing in position, shrouding material for porous pipe gallery / slotted pipe gallery / trench gallery with all leads and lift involved including transportation of materials to site of works, screening and washing of materials and placing in position with given section, etc. complete. a) 40 mm gauge pebbles

b) 12 mm to 20 mm gauge pebble

c) 6 mm to 12 mm gauge pebbles

d) sand ( less than 6 mm )

Sub Estimate No 01:- Renovation Existing Well Item no.1.Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Item no.2.Excavation for foundation in hard murum, including removing the excavated material up to a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete Lift 0.00 to 1.50

Lift 1.50 to 3.0 mt

Item no.3. Excavation for foundation /pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material up to a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 3.00 to 4.50 mt

B] Lift 4.50 to 6.00 mt.

C] Lift – 6.0 to 7.50 Mtr.

D] Lift – 7.50 to 9.0 Mtr

E] Lift – 9.0 to 10.50 Mtr

Item no.4. Refilling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15 cm to 20 cm layers including watering and compaction etc. complete.

Item no.5. Providing & casting in situ cement concrete M - 250 of trap / granite / quartzite / gneiss metal of approved quality for R.C.C. work, Beams & lintels as per detail drawing & designs or as directed by Engineer in charge . . . . Etc complete.

Item no.6.Providing and fixing in position steel bar reinformenent of various dia. For R.C.C. pile caps Footing Foundation Slab Beams columns as per details designs drawing and schedules including cutting bending hooking the bars banding with wires including etc.

Item no.7. Dewatering the excavated trenches and pools of water in the building trenches, well works by by using pumps and other devices including disposing off water to safe distance as directed by Engineer –in-charge (including cost of machinery, labour, fuel), etc. complete.

Item no.8: Providing and laying weep holes of 80 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete.

Sub Estimate No.03:-Pumping Machinery Item no.1:- Providing, erecting & giving test of submersible pump set conforming to IS 9283, with water proof winding. pump shall be suitable for various delivery head and discharge eith stanless steel shaft. motor suitable for working on 415 +_ 10%, 3ph, 50 Hz A.C. supply, with cable guard, thrust carbon/ fiber bearing to eithstand entire hydraulic thrust.the pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should bave suitable discharge out let as per manufacture's design. Antitrust stream lined non return valve shall be provide with the pump. 10m Submersible copper conductor cable, in single/double run and 2 Pair of erection clamp 65 mm width 10mm thick shall be provided with each pump. 5.00 H.P.

Item No.2 :- Supplying and erecting flat flexible submersible cable with copper conductor & Aluminium conductor , PVC insulated and PVC sheathed. a) 3 core 10 sq. mm Copper Conductor

Item No.3 :- Supplying and erecting on angle frame, Four pole MCCB with reworable fuse , 415 / 500 V of ruitable rating, with Neutral link, of below rating and of approved make. a) 100 Amp MCCB 4 pole

Item No.4 :- Supplying and erecting on load four pole iron clad / metal clad ON LOAD change over switch 100A, 415/500V erected on angle iron frame approved make. a) 100 Amp Change over switch

Item No.5 :- Supplying and erecting bank of All Polypropylene condensors (App type ) with the standard capacities of 2,3,5,7,10,12.5 and 15 kVAR Units of P.F. correction for operation on 3 phase 50 cycles 400/440V (+10%) with externally discharging resistance, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box completeerected on provided iron bracket or on floor duly tested by licensee Capacitor

Item No.6 :- Supplying and erecting with Copper earth plate size 30 x 30 x 0.315 cms. complete with all materials, testing & recording the results as per specification no.EA-EP

Item No.7 :- Supplying and erecting Marine plywood 19 mm thick fixed to wall or on providing panel board for fixing kit-kat fuses and meters etc. complete.

Item No.8 :- Providing & erecting control Panel Board suitable for submersible pump sets with 2 years guarantee & also five visits for periodical maintenance during the guarantee period . the control unit shall be suitable for programming independently for 2 shifts …. etc

Item No.9 :- Providing & supplying ISI mark CI D/F reflux valves ( non – return valves ) of following dia. Including all taxes, ( Central and Local ), railway freight, inspection charges unloading from railway wagon, loading into truck, transportation upto departmental stores/ site, unloading, staking etc. complete. …….. etc complete. Non – Return valve – For Rating class 150 80 mm dia.

Item No.10 :- Providing double flange sluice confirming for IS- 2906/1446 including worn gear arrangements as per test pressure stainless steel spindle, caps including all taxes transporation etc. complete. Sluice valve – For Rating class 150 80 mm dia.

Item No.11 :-Providing structural steel work in single stanchions composed of RSJ channel .etc with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, as per detailed design and drawing or as directed by engineer -in-charge in cluding cutting, fabrication, hoisting, fixing in position, making riveted/ bolted/ welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc. complete.

Sub estimate No.04:- Rising Main Item No.1 :- Excavation for foundation / pipe trenches in earth soil of all types, sand, gravel & soft murum including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete. a) Lift 0 to 1.50 M.

Item No.3 :-Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint, including all local & central taxes etc.complete 63 mm dia. HDPE pipe 8Kg/cm2

Item No.4 -Lowering and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint, including all local & central taxes etc.complete 63 mm dia. HDPE pipe 8Kg/cm2

Item No.4 :-Providing and supplying HDPE Pipe Specials such as Tee, bend,…etc

Item No 5.: - Providing double flanges Sluice Vavve conferming IS 2906/14846 Incl worn gear arrangement as per test pressure stainless steel spindle, cap,inl. All taxes transportation etc. complete

Item No 6.: - Lowering & laying And jointing in position following CIDF/Refluxe valve,Butterfly valve and Sluice valve incl. cost of all labour jointing material incl. nuts bolts and giving satisfactory hydraulic tesing etc complete

Item No.7:- Refilling the trenches from excavated stuff with soft material in 15 cm layers with all leads & lifts including consolidation surcharging … etc complete.

Item No.8 :- Providing and laying in situ Plain Cement concrete in proportion M-150 of trap metal for foundation & bedding, including out water manually, form work, capacity & caring etc…… complete.

Item No.9:- Providing & supplying Air valves as per IS-10845 & MJP's standard specifications of approved make & quality of following diameter including all taxes , all transportation charges, inspection charges loading, unloading & stacking etc complete Air Valve Single Ball flanged 25 mm Type PN-1

Item No 10 :- Lowetring, laying & fixing in proper alignment & position all types of CI air valves as directed by Engineer-In-Charge including cost of all transportation, cost of all material & giving satisfactory hydraulic testing etc complete. 25 mm Type PN-1

Sub Estimate no.06:- RCC ESR 15000Ltr Capacity ItemNo.01:-Designing & constructing RCC elevated service reservoirs based on owner design of following capacity with RCC staging consisting of columns, internal & external bracing spaced vertically at not more than 4.50 mt. C/C including excavation in all types of strata ,foundation concrete , cement plaster with water proofing compound to the inside faces of the container including refilling excavated pits or trenches ,disposing of surplus excavated stuff within a lead of 50 M. ,all labour and material charges including lowering ,laying, erecting hoisting and jointing for pipe assembly of inlet, outlet, washout ,overflow and bye pass arrangement as per design, providing and fixing accessories such as MS ladder for entering into container , CI manhole frame and cover , water level indicator, lightning conductor , G.I. pipe railing around RCC walkway at the bottom of container at top as well providing M.S. ladder with G.I. railing for ESR up to 2 Lakh liters., MS grill gate of 2 mtr height with locking arrangement of approved design B.B. masonry chambers for all valves, fixing ventilators on top slab etc. including giving satisfactory water tightness test and providing 3 coats for snowcem paint to all exposed surface of the structure including top roof surface & epoxy painting to internal surface of roof slab, internal surface of free board area ( i.e. vertical wall surface ) & anti termite treatment for underground parts of the structure & giving satisfactory water tightness test as per IS code, The job to include painting the name of scheme & other details on the reservoir as per the directions of EngineeIn-Chargetc. As per design data criteria obligatory requirements as per detailed specification the job include painting the name of scheme and capacity of reservoir cost of 47000 lit. capacity and meter staging. Note:-1. The entire structure shall be in M-300 mix only. 2. Irrespective of the type of foundation proposed in the design, one set of bracing be provided at the ground level. 3.RCC design should be in seismic zone -IV 4.Minimum depth of foundation should be 2.0 M a) Construction Cost

b) Pipe Assembly

Sub Estimate No.06:- Distribution System Item No. 1: Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer – in – charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Item No.2 :- Providing and Supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread/ insert joint / quick release coupler joint / compression fitting joint or flanged joint, excluding coupler/ specials, including transportation and fright charges inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains excluding GST levied by GOI & GOM in all respect etc. complete. 90 mm dia 6 Kg / Sq.cm.

75 mm dia 6 Kg / Sq.cm.

63 mm dia 6 Kg / Sq.cm.

Item No.3 :- Lowering laying and jointing H.D.P.E. / M.D.P.E. pipes in proper position including all specials by compression fitting/ electrofusion and butt fusion jointing procedure as per relevent IS code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/ butt fusion welding machine with hydraulic jack, top loading clamp etc and all labours as directed by Engineer-in-charge as per IS- 7634 Part II 90 mm dia 6 Kg / Sq.cm.

75 mm dia 6 Kg / Sq.cm.

63 mm dia 6 Kg / Sq.cm.

Item No.4 :- Providing & supplying specials for all types of Pipes….etc complete.

Item No.5 :- Providing double flange sluice confirming for IS- 14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including inspection charges, traspotation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valve –PN –1.6 (65 mm dia )

Sluice valve – PN – 1.6 (80 mm dia )

Sluice valve – PN – 1.6 (100 mm dia )

Item No.6 :- Lowering, laying and jointing in position following CI D/F reflux valves, sluice valves and butterfly valves including cost of labour jointing material, including nut bolts and giving satisfactory hydraulic testing ect. Complete. ( Rate for all class ar vaives.) Sluice valve – PN – 1.6 (65 mm dia )

Sluice valve – PN – 1.6 (80 mm dia )

Sluice valve – PN – 1.6 (100 mm dia )

Item No.7 :- Refilling the trenches with available excavated stuff with soft material first over pipe line and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.

Item No.8 :- Providing & laying in site following grades of C.C. of trap/granite /quartzite/gneiss/metal for foundation & bedding including dewatering, form work, compacting & curing, finishing , etc complete. M-150

GST 12%