Rural Development Department Tender

Item No. 4 : Providing and laying in situ / Ready mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete columns as per detailed design and drawing or as directed including steel centreing, formwork, , cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complte (excluding reinforcemetn anf structural steel) etc. complete with fully automatic micro processor based PLC with SCADA enabled reverisble drum type mixer/concrete batch mix plant (pan mixer) etc complete with fine aggregate (Natural sand / CRushed sand VSI grade finely washed etc ) finishing if required and curing etc Spec. No. : Bd.F.5 Page No. 300. and B.7 , Page. No. 38 S.S.R.I. I.No. 25.31 Page. No. 222.

Item No. 5 : Providing and laying in situ / Ready mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed design and drawing or as directed including steel centreing, formwork, , ocver blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complte (excluding reinforcemetn anf structural steel) etc. complete with fully automatic micro processor based PLC with SCADA enabled reverisble drum type mixer/concrete batch mix plant (pan mixer) etc complete with fine aggregate (Natural sand / CRushed sand VSI grade finely washed etc ) finishing if required and curing etc Spec. No. : Bd.F.6 Page No. 300. and B.7 , Page. No. 38 S.S.R.I. I.No. 25.50.

Item No. 6 : Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. DSR I.no. 26.33

Item No. 7 : Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete. SSSR I.No.27.01

Item No. 8 : Providing Internal cement plaster 20 mm thick in single coat in cement mortor 1:4 without neeru Finish to concrete or brick surface in all position inluding scaffolding and curing etc.

Item No. 13 : Provding and fixing 50 mm dia. Medium class G.I. Pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embeded in C.C. Block etc.

Item No. 10 : Provding and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surface inluding scfollding if necessary, clarning etc.

Item No. 11 : Royalty Charges

Item No. 12 : Providing Quality Control Test 1) Compressive Strangth of C.C. Cube

2.brick

Sushobhikaran Item No.1 : Excavation for foundation in earth, soil of all sand, gravel and soft murum, inluding removing the excavated etc.

Item No.2 : Providing rubble filling of trap/granite/quartzite gneiss stones for foundations inluding filling voids with sand/grit etc.

Item No.3 : Providing and laying cast in situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation etc.

Item No.4 : Providing and laying concrete pipes oof I.S.NP class of 300mm diameter in proper line, level and slope etc.

Item No.5 : Providing and laying cast in situ/Ready Mix cement concrete in M-15 of trap/granite/quartzite/gneiss metal for bed block etc.

Item No.6 : Providing and fixing heavy duty inter locking concrete coloured paving blocks of 80 mm thickness etc.

Item No.7 : Providing and constructing Brick Masnory Inspection, Chamber 60 cm x 45 cm with R.C.C. Raft in B.C. Soil area

Item No.8 : Provding and fixing board diaplying information.such as 'Name of work,Tender cost,name of contractor,work compltion and liability period etc,having rectangular shape of 1.20mx0.9m size made out 18 gauge (1.25mm) thick mild steel sheet paited with one coat of Zinc choromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border /

Item No. 9 : Royalty Charges

Item No. 10 : Providing Quality Control Test 1) Cube Test

2.Paver block