Rural Development Department Tender

Item No.3:- Excavation in soft rock without blasting including boulders upto 0.6 m. diameter (0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc. and placing the excavated soft rock neatly in dump area or for formation of service road including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. complete with lead up to 15 m. and all lifts as directed.

Item No.4: Providing and laying in situ cement concrete grade M-15 of trap/ granite/ gneiss/ quartzite / graded metal for PCC with or without surface reinforcement / RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structues, training walls, piers, abutments etc. with concrete Mixer with shuttering and scaffolding, placing, compacting, curing with an initial lead of 1 km. and all lifts etc. complete as directed (A) M-15 (20 MSA) (Cement 5.64 bags/ cum)

Item No.5: Providing and fixing Tor steel reinforcement including cutting, bending, hooking, laying in position, tying with M.S. bars for reinforcement of R.C.C. work as per detailed dsign and drawing etc. including binding wire with all lead and lift as directed etc. complete (Steel 5kg/sq.m.)

Item No.6: Providing structural steel (ISWB 150 x 100 mm.) in rolled section like joints, angles etc. as per detailed design and drawing including fixing in position with hold fasts, including oil paint with two coat including one coat anticorrosive paint etc. complete (for sill beam 150 x 100 )

Item No.7: Providing pointing with cement mortar for stone masonry including racking joints, scaffolding, curing etc. complete as directed (A) In Cement Mortar 1:3

Item No.8: Providing and laying cement plaster 6mm. Thick in C.M.1:3 single coat without neeru finish to concrete surface in all position including scaffolding, curing, including etc. complete (0.057 bags/ sqm.)

Item No.9: Back filling upto ground level behind the canal structures etc. complete with suitable material of approved quality in layers not exceeding 20cm. Without disturbing the structure etc. complete as directed

Item No.10:: Providing and constructing 300mm. Thick dry rubble stone pitching with pin headers at 2 per sqm. Using stones and stone chips from approved source includgn cost of all materials, labour, hand packing/ wedging stone chips, finishing etc. complete with lead upto 50 m. and all lifts as directed

Item No.11: Providing and fixing structural steel for M.S. Gate including cutting, bending, hooking, laying in position, tying with M.S. bars for reinforcement of R.C.C. work as per detailed design and drawing etc. including binding wire with all lead and lift as directed etc. complete.

Item No.12: Providing 'X' Ray Quality M.S. welding in all positions with required number of runs, for M.S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification, using electrodes having weldmark E7018 )Low hydrogen electrodes), including surface preparation (i.e. Removal of scale, cleaning etc.) including all materials, labour equipments, etc. complete (welding 6 mm. thick)

Item No.13: Providing and applying primer Red Oxide Paint in two coats including surface preparation, chipping the welding, cleaning spatters, dust etc. complete.

Item No.14: Providing and fixing Rubber seal (size 60 x 20 mm.) for M.S. Gate including cutting, laying in position, tying with nut & bolts work as per detailed design and drawing etc. including binding wire with all lead and lift as directed etc. complete.

Item No.15: Providing and fixing in position mild steel needle of 2120 x 500 x 4 mm. thick size, fabricated with mild steel plate, intermidiate verticle stiffeners, horizantal stiffeners, angle cleats, mild steel plate packing for nut bolts and lifting hooks etc. including cutting, fabricating, hoisting, erecting, fixing in position, making rivetted/ bolted/ welded connection and painting with two coats of anticorrosive lead based oil paint with primer coat including testing at site etc. complete with leads and lifts, and as per detailed specifcations, designs and drawings or as directed by Engineer in charge

Item No.16: Providing and fixing canal information baord of 1.2 x 0.75 m. prepared on 16 guage M.S. sheet with angle iron frame of size 35 x 35 x 3 mm. with cross bracing of size 25 x 25 x 3 mm. including painting with one coat of zinc chromate storing primer and two coats each of green / white back ground and back side grey store enamelled bonded with red retro reflective sheet engineering grade, border/ letters/ numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50 x 50 x 5 mm. of 3.65 m. long inflated at bottom drilled on top and painted in white and black bonds of 30cm. with four numbers high strength of G.I. bolts and nuts of size 10 mm. dia. and 20 mm. long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 x 60 x 75cm. as directed by Engineer in charge