Rural Development Department Tender

Item No 4:- Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite /graded metal for foundation and bedding with Concrete Mixer including placing, compacting, curing etc. complete with an initial lead of 1 k m & all lifts etc complete as directed ( For body weir / Peir / abutment / wing wall ) with all lead and lifts as directed by Engineer-In-Charge

Item No 5:- Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite /graded metal for foundation and bedding with Concrete Mixer including placing, compacting, curing etc. complete with an initial lead of 1 k m & all lifts etc complete as directed ( For body weir / Peir / abutment / wing wall ) with all lead and lifts as directed by Engineer-In-Charge

Item No 6:- Providing and Fixing TMT -FE -500 bar rainforcement of various diameter for RCC Work, pipe, caps, footing, foundation, slab beam, column, canopies, stair case , chhaja, lintels, copings, as per detail drawing and schedule, including cutting, bending, hooking, binding with wire, tack welding and supporting as required as per standard specification with all leads & lifts etc complete as directed by the Engineer-In Charge

Item no 7:- Straight needles K. T. Weir gate manufacturing with QAP and fabrication of K.T. Weir needles gets stright type size 2.15x0.5 m -94 kg weight as per relevent indian standered with all material mild steel conferming to IS 2062 rubber seal conferming to IS 4623 welding electrods AWSE C013 for general weld joints it includes all metarials labour charges machinery charges 1km lead charges of transportation loading and unloading charges get parts at site inspaction an Quality control charges sand blasting, painting with one coat of zinc rich primer on dry film to give total dry film thickness 70+-5 micron and two cotes of sloventless coal tar epoxy paint applied to give a minimum dry film thickness of 150+-5 micron per coat as per IS 14177 with all lead and lifts as directed by Engineer-In-Charge

Item No 8:- Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. with all lead and lifts as directed by Engineer-In-Charge

Item No 9:- Back filling up to ground level behind the canal structures etc. complete with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc. complete as directed.with all lead and lifts as directed by Engineer-In-Charge

Item no 10 :- Drilling holes for inserting anchor bars in foundation inclding cleaning flushing the hole etc complete with all lead and lifts as directed by Engineer-In-Charge

tem No 11:- Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-in-charge.

tem No 12- Fixing of MS Needls in Weri opening after offset of mansoon for storage of water from post mansoon river flow etc complete with all lead and lifts as directed by Engineer-In-Charge