Rural Development Department Tender

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. Spec. No.: Bd.L.4 Page Number 368 SSR No.32.07 P.No. 153

Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. Spec. No.: Spec.Number: Bd.O.8/Page Number406 SSR No.35.15 P.No. 165

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for Foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.: Bd. E. 1 Page Number 287 SSR No.24.01 P.No. 131

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete Spec. No.: A directed by Engineer in charge SSR No.33.51 P.No. 160

Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery Spec. No.: As directed by Engineer-in-charge SSR No.51.4 P.No. 260

Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery Spec. No.: As directed by Engineer-in-charge SSR No.51.43 P.No. 260

Executive Table @ 2250Lx2100Dx750HT including Low Height Credestal @ 1200Lx450Dx650HT Providing & Fixing of Table @ 2250Lx2100Dx750HT TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band. INCLUDING CREDESTAL @ 1200L X 450D X 650H :- To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between ) as per drawing. Spec. No.: As directed by Engineer-in-charge SSR No.51.24 P.No. 257

Executive's Table @ 1800Lx900Dx750HT Providing & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band as per drawing Spec. No.: As directed by Engineer-in-charge SSR No.51.21 P.No. 257

Free Standing Table @ 1500Lx600Dx750HT Providing and fixing Table of Size 1500 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, Spec. No.: As directed by Engineer-in-charge SSR No.51.26 P.No. 258

Book Case with Glass Shutter @ 825Lx300Dx1650HT Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing. Spec. No.: As directed by Engineer-in-charge SSR No.51.39 P.No. 260

Medium Height Steel Storage @ 750Lx450Dx1200HT Providing and fixing Openable Steel Storage of 750 x 450 x 1200Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk. as per drawing. Spec. No.: As directed by Engineer-in-charge SSR No.51.36 P.No. 260

Stool for Lab and Class-IV Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45 MM Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge. Spec. No.: As directed by Engineer-in-charge SSR No.51.51 P.No. 266

Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. Spec. No.: As directed by Engineer-in-charge SSR No.51.44 P.No. 260

Single Bed @ 2025LX 1000DX 650H Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: - The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. Spec. No.: As directed by Engineer-in-charge SSR No.51.55 P.No. 267

Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) Spec. No.: As directed by Engineer-in-charge SSR No.51.19 P.No. 257

ADD FOR ROYALTY CHARGES FOR SAND

ADD FOR ROYALTY CHARGES FOR OTHER MINIRALS

ADD FOR 12% GST

BOREWELL : Drilling of 150 mm dia. borewell by high pressure DTH Rig etc. complete

Providing and Fitting of 180 mm dia. Casing Pipe of UPVC etc. complete 180 mm dia. UPVC Pipe of 6kg/sq.cm

Yeild Testing Charges for Successful borewell etc. complete

Providing and Fixing Bore Cap etc. Complete.

PUMPING MACHINERY Providing and testing of Single Phase submersible pumpset conforming to IS 8034 and motor conforming to iS 9283 with water Proof winding pump shall be suitable for various delivery heads and discharges with stainless steel shaft motor suitable for working on 415 V = 10% 3 ph. 50 Hz. A.C. Supply, with cable guard, thrust carbon fibre bearing etc.

Providing and Fixing Box type panel board for sub pump upto 1.5 BHP including starter, voltmeter, capcitor ammeter, main switch etc. complete.

Supplying and erecting plin copper conducor PVC Inslulated Flexible cable as per IS 694 - 1990 of Following Grade upto 1100 etc.

Supplying and erecting H.D.P.E. I.S.I Mark 32 mm dia. Pipe suitable for pressure of 6 kg/sq.cm connected to jet submersible pump with required material complete.

ADD FOR 12% GST

PIPE LINE & PVC TANK Providing Laying and fixing C.P.V.C. Pipe of Follwing Dia. With fitting such as bends, tees, reducers, clamp, etc. including necessary excavation trench filling etc. complete inluding removing existing pipe line if necessary and conveying and stacking the same in PWD Chowky or as directed etc.

Providing Laying and fixing P.V.C. Pipe of Follwing Dia. With fitting such as bends, tees, reducers, clamp, etc. including necessary excavation trench filling etc. complete inluding removing existing pipe line if necessary and conveying and stacking the same in PWD Chowky or as directed etc.

Providing and Fixing HDP Container syntex or alike one piece moulded water tank made out of low density polythyler and buld corrugation inluding of delivery upto destination hoisting and fixing of accessores such as inlet, outlet overflow of all tanks capcity.

Providing and fixing 15 mm dia.meter pvc aqua kraft type of approved make super bib tap with flange including all accessories etc. complete.

ADD FOR 12% GST

R.O. SHED Excavation for foundation in hard Murum including removing the excavated material upto a distance of 50 m beyond the building area and stacking and spereading as directeed, dewatering preparing the bed for the foundation and necessary back filling remaing watering including shoring and strutting etc. complete (Lift upto 1.5m) Bd.A.1 page no. 259

Excavation for foundation / pipe trenches in soft rock incluinding removing the excavted materials upto a distance of 50 M and lifts ans below, stacking and spreding as directed by Engineer-in Charge, Normal dewatering, preparing the bed for foundation and excluding back filling, etc. Complete

Providing and laying Cast in situ/Ready Mix cement concrete in M 15 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1.6 in plinth as backing in compositemasonry including bailing out water manually, striking joints, raking out joints and watering etc Complete. Bd.G.3 Page No. 314

Providng Dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 to 20 cm thick layers inclduing hand packing and compcting. Etc. complete Bd-A-12/264

Providing and filling in sand boxing in pippeline or for foundation with sand of approved quality including watring and compaction, etc.compite.

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting, of approved quality and shade etc. complete. Bd.C.3 Page No. 275

Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.). Bd.R.5,

ADD FOR 12% GST

R.O. PANT AS PER ESTIMATE

ADD FOR 12% GST