Rural Development Department Tender

Lift 3.00 to 4.50 M

Item No:- 3 Dewatering the excavated trenches and pools of water in the building trenches/pipeline tren-ches, well works by using pumps or other devices including desposing off water to safe dist-ance as directed by engineer-in-charge. ( Including cost of machinery, Labour charges etc )

Item No:-1 Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. Submersible monoblock Pump set (with Bronze / Stainless steel(CF8M) Impeller) Horizontal / Vertical - up to 3 stages 5.00 BHP

Item No:- 2 Providing and Supplying ISI mark HDPE of following class and diameter including all taxes (Central and local Insurance ,railway freight, unloading from railway wagon, loading into track transport to departmentally stores /site, unloading stacking etc. comp. 90 mm dia.HDPE Pipe-PE-100

Item No:- 3 Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 to 10.00 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc

Item No:- 4 Supplying and erecting flat flexible 3 core 6 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. 3 Core 6 Sqmm

Item No:- 5 Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 90 mm dia 6 kg/cm2 HDPE Pipe Line

Item No:- 6 Providing and supplying Rassi etc. complete.

Item No:- 1 Excavation for foundation / pipe trenches in earth. Soils of all types. Sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed,etc complete

Item No:- 2 Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50 m beyond area and lifts as below, stacking spreading as directed by Engineer- in- charge normal dewatering,preaparing he bed for foundation excluding backfilling etc complete

Item No:- 3 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry Foundation asphalt roadincluding removing the excavated material up to a distance of 50 m beyond area and lifts as below, stacking as directed by Engineer- in- charges etc complete

Item No:- 4 Excavation for foundation / pipe trenches in Hard rock& concrete by controlled blasting, including trimming & levelling the bed by chisseling where where lifts as below, stacking as directed by Engineer- in- charges normal dewatering, etc complete

Item No:- 5 Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15 cm to 20 cm layers including watering and compaction complete.

Item No:- 6 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like echanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. A.) PE-100 a) 6 Kg/Sq. cm : 110 mm dia 6 kg/cm2 HDPE Pipe Line

Item No:- 7 Providing and Supplying ISI mark G.I. pipe of following class and diameter including all taxes (Central and local Insurance ,railway freight, unloading from railway wagon, loading into track transport to departmentally stores /site, unloading stacking etc. comp. Note:-One coupler shall be provided with each full length pipe cost of which included in rates below a) 100 mm dia.G I Pipe (Medium class)

Item No:- 8 'Providing double flanged short body pattern type manually operated Butterfly Valve having body.disc and end cover in graded cast iron to IS-210 Gr.CF 200 generally confirming to IS-13095-1991, Synthetic rubber faced ring secured on disc by retainning ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing including inspection charge transporation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc.excluding C.C. foundation/structural steel support. 100 mm dia Non Return valve

100 mm dia Sluice valve

Item No:- 9 Providing & supplying at site of work CI/ PVC /GI specials suitable for above said pipes including cost of all taxes fright charges octroi loading Unloading conveyance etc.

Item No:- 10 Providing and supplying Air Valves as per IS- 14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete. 50 mm.Air Valve Singal Ball

Item No:- 11 Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 110 mm dia 6 kg/cm2 HDPE Pipe Line

Item No:- 12 Lowering ,laying and jointing G.I.pipes and specials of following class and dia. C.I./M.S. specials of following dia. Including conveyance from store to site of woks all labour ,giving satisfactory hydraulic test etc comp. Either under ground or in vertical position as directed by Engineer in charge 100 mm dia.G I Pipe (Medium class)

Item No:- 13 Lowering,laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, cincluding nut bolts and giving satisfactory hydraulic testing, etc.complete. (Rate for all class of Valves) 100 mm dia Non Return valve

Item No:- 14 Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M- 150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design)

Item No:- 15 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation , surcharging, etc. complete.

Item No:- 16 Dismantling dead pipeline of M.S./ ./ P.V.C./R.C. C./ S.W ./C.I./ P.S.C. and G.I./A.C /H.D.P.E. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and s tacking to the place as directed by Engineer-in-charg e with all leads and lifts including cleaning the surface,etc. complete 110 mm dia 6 kg/cm2 HDPE Pipe Line

Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge.

MSEB Charges Pure Water P/Mach

Material Bleaching Powder