Rural Development Department Tender

Item No. 3 :- providing 25 mm dia hole in hard rock 0.75 mt depth including drilling and blasting

Item No. 5.1:- Providing & laying M.S. /HYSD/TMT bars including cutting bending hooking binding with binding wires or tuck welding including cost of binding wires & labour including fixing in position etc complete. 25 mm Dia as directed by engineer incharge.

Item No. 5.2:- Providing & laying M.S. /HYSD/TMT bars including cutting bending hooking binding with binding wires or tuck welding including cost of binding wires & labour including fixing in position etc complete. 10 mm Dia as directed by engineer incharge.

Item No. 5.2:- Providing & laying M.S. /HYSD/TMT bars including cutting bending hooking binding with binding wires or tuck welding including cost of binding wires & labour including fixing in position etc complete. 10 mm Dia as directed by engineer incharge.

Item No. 6:- Providing and laying in situ cement concrete of grade 1:2:4 M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement /RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway down stream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete mixer considering lead of 50 m with shuttering and scaffolding placing compacting curing etc complete with initial lead of 50 m & lift of 1.5 m ( 40 MSA ) as directed by engineer incharge.

Item No. 10 :- Providing & fixing road junction / information sign board of size 1.20 m x 0.75 m preapred on 16 guage M S Sheet with angle iron frame of size 35x35x3 mm with cross bracing of size 25x25x3 mm including painting with one coat of zinc cromate stoving primer and two coats each of green / white back ground aand back side gray stove enameeled bonded with red retro reflective sheet Engineering grade border/ letter /numeral / arrows coated with non pealable crystel clear protective trannsperent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bands of 30 cm with 4 Nos high strength G I Bolt and nuts of size 10 mm dia and 20 mm long pece without joints including alltaxes, conveying , fising in ground with cement concrete in M-15 block of size60x60x75 cm as directed by engineer incharge

Labrotary test of concrete For Quality Control Work As Per Tender

Royalty Item as per Estimate ( To be put in tender but % above & below will not be applicable to this item as the royalty has to be paid as per rates decided by Govt of Maharashtra and as per actual work done on site) For Other material

GST Item as per Estimate ( To be put in tender but % above & below will not be applicable to this item as the it has to be paid as per rates decided by Govt of Maharashtra)

Insurance 1 % ( To be put in tender but % above & below will not be applicable to this item as the it has to be paid as per rates decided by Govt of Maharashtra)