Rural Development Department Tender

Providing and casting in situ Cement concrete M-20 of trap/granite/gniess metal for RCC SLABS&LANDINGS as per drawings design or as directed including centering formwork,compaction and finishing the formed surfaces with cement compaction and finishing the formed surfaces with cement morter 1:3 sufficient minimum thickness to give a smooth and even surface or roughing the surface if special finish is to be provided and curing. (excluding reinforcement.) (SPEC NO.BD.F.8 PAGE NO.302 and B.7 Page No.38) SSR P NO.239/ I NO.25.70

Providing and fixing in positionTMT-FE-500 Reinforcenent of various diameter for RCC Pilecaps footing , foundation ,slabs beams.lintles,columns,canopies,staircases,newels,chajjas,lintels, pardi,coping,fins ,arches,etc. as per detailed drawing and scheduled including cutting,bending ,hooking the bars ,binding the bars, binding eith wires, or tack welding and supporting as per required complete. (SPEC.NO.BDF.17.PAGE NO.306)SSR P NO.247/ I NO.26.33

Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete.As directed by Engineer in charge .SSR P NO 173. I NO .38.26

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180- 250 mm center-to-center. The end rib shall be designed for anticapillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm)As directed by Engineer in charge Bd.R. SSR P.NO.173. I.NO.38.34

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete.complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd. E. 1 Page No. 287

Providing and laying vitrified matt finish tiles having size 590mm to 605mm x to 605mm of 8 to10 mm thickness and confirming IS.15622-2006(GroupBla)of approved make,shade and pattern for flooring in required position fixed in 1:4 cement mortar including neat cement float,filling joints,curing and cleaning etc. complete

Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and required width wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float,filling joints,with neat cement slurry,curing,polishing and cleaning etc.complet

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in allpositions including scaffolding and curing etc. complete

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.(Specificationas directed by Engg. Incharge)

Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary,preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying pearl/luster finish paint of approved colour and shade to the existing plaster surface including scaffolding,preparing the surface,applying the acrylic wall putti etc.complete..

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning,preparing the plaster surface,applying primer coat,scaffolding if necessary , and watering the surface for two days etc complete.

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.(Bd.C.8 Page No.278)

Testing of Materials

1 % Cess/Labour For Insurance

Add For SQM Charges 0.5 %

GST 18 %