Rural Development Department Tender

Item No.4 :- Supplying & erecting single phase, 240V, street light control panel up to the max load of 6kW, SPN MCB 40A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame/ CC foundation. (5-2-3) (CSR No. 5-2-3)

Item No.5 :- Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(CSR No. 7-1-6) .

Item No.6 :- Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE (CSR No. 7-6-2)

Item No.7 :- Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete..(CSR No.7-6-9)

Item No. 8 :- Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP (CSR No. 9-1-1)

Item No. 9 :- Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP (CSR No. 9-1-4)

Item No. 10 :-Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). (CSR No. 16-3-8)

Item No. 11:- Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (6-1-19)

Item No. 12:- Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL (8-2-12)

Item No. 13: Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). (16-3-9)

Item No. 14: Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard (6-1-20)

Item No. 15: Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. (6-1-1)

Item No. 16 : Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (9-2-8)

Item No. 17 :- Supplying and erecting cast iron pole of nearly 4000 mm length ,The pole has ornamental base of ovreall dimension height 1000mm,bottom dia 370mm, should have inbuilt junction box for fixing MCB with detachable window cover. The part above Ornamental base design consist of decorative sections of circular shapes & rings in different dimensions , is made of cast iron fine finish. Bracket The ornamental Custom made tubular design combo brackets of 610 mm width, 1000 mm height and other bracket of nearly 600 mm width , 810 mm height, both of which are made in combination of heavy duty mild steel hollow pipe section nearly of Dia 48mm aesthetically bent armed with cast iron elements. A decorative element provided on top of the circular shape of asthetics. (Non CSR)

Item No. 18 :-supplying and erecting the Ornamental aluminium casted decorative light fitting of total height nearly 601 mm & Width of 302 mm. The fixtures having suitable connector for fixing on required post. The fixtures have casted parts which are well assembled desigh for better look. It shall have designed to illuminate large areas with its wide Dispersion without affecting the environment. It shall have Glass fixture to cover light and stainless steel fastening elements for assembling lights.The fixture having provision to fix complete with required power supply. The fixture having provision to fix complete with required power supply, The luminaries must have rated with IES LM 79-089As per IEC62262:2002) & IP -66 Rated. The Main structural components of fixtures have UV resistant & shock resistant IK 08(As per IEC62262:2002)with tilting rame for access to the electric & optical auxillary compartment with silicon gaskets fixing. As regarding the electrical auxillaries for LED Module of 25w with IP Protected polycarbonate lens & input Frequency of 50HZ; THD10% with inbuilt surge protection of 5KV Ac & High grade heat sink in extruded aluminium with silicon compound used for PCB heat transfer Each LED with specific lens for uniform photometric distribution. The LED Driver should be Water proof, with aluminium casing covering with silicon potting with efficiency 85%. The LED efficiency of 15-25 Lumens /Watt ; it has appropriate space for auxiliary devices for plate wiring. (Non CSR)

Item No. 19: Supplying, installing, testing and commissioning of solar panel comprising high efficiency polycrystalline / multi' crystalline photovoltaic cell 250Wp, 26V with necessary clamps and module frame on existing structure complete with following Specification maximum power 250 Wtt. Open circuit voltage 24V, short circuit current (ISE) 9.21AA Voltage at maximum power (Vmp/Vmpp) 17.3V current at maximum power (Imp): 7.95A, operting (Nominal) Voltage 24V dimension 1640x985x45 in mm complete (With Five Years Warranty) (Non CSR)(Approved By Superintending Engineer Nanded PWD Electrical Region Nanded No. 94 /2024 Date :- 09/01/2024

Item No. 20: Supplying and erecting DC Light Emitting Diode Flood light fitting of 24V 25W, including first 6 hr full intensity light output and following 6 hr. with half intensity light output , with lumen 3750, colour temp 5500K -6500K, colour redering index 70 , PWM charge controller efficiency 90 %, DC Light Emitting Diode driver efficiency 90%. Duty cycle first six hours 100%, Rest 50% light, DC Light Emitting Diode external optics 145X90 degree street light lens , class IP 66. charge controlller methodology - three stage battery charge monitoring algorithm, maximum charging current 20Amps. short circuit protection, battery over charge protections, battery deep discharge protection, solar panel dusk to dawn operation NTTV- 4V, DTTV- 6V. battery low load disconnect voltage 22.4V. battery full load disconnect voltage 26V. battery constant voltage set point 29.4V Light Emitting Diode indication green of battery not charging PV low, green on battery charging green flashing battery full, rate of battery not discharge, red on: battery disciarge, load disconnect over on dimentions 255mm x 90mm x 60mm, over all weight 1kg & above housing of pressure die cast aluminium alloy and heat sink extruted aluminium complete. (NON CSR) (Five Years Warranty)(Approved By Superintending Engineer Nanded PWD Electrical Region Nanded No. 94 / 2024 Date :- 09 / 01 / 2024

Item No. 21: Supplying, installing, testing and commissioning Of Lifepo4 battery with capacity of 24V-78 Ah with 8S 15A BMS, Cell having duty cycle 3000 suitable to charge lithium cell with necessary wiring connections, With IP 65 alluminium cabinet with stand and nut bolts complete ( Nominal Voltage -24V, Nominal Capacity - 75Ah. Stored Energy-1.8Kw. Cycle@0.5C. 80%DOD 3000. Charge Voltage -29.2charge mode-CCCV. Standard charge current-15 amp. rapid charge current-37.5 standard I discharge current-15, max charge current- 75 amp, low voltage cutoff- 21.2. casing material- necessary suitable solar inverter / charge conttroller timing setting arrangement & necessary stand by arrangement for AC supply in case of rainy session • Alluminium. Terminal- MC4 connector, charge temp range-0-45C , Discharge temperature range 20-55 C. Storage temp - 20- 45C, Weight - 17Kg. (Non CSR) (5 Year Warrantee) (Approved By Superintending Engineer Nanded PWD Electrical Region Nanded No. 94 /2024 Date :- 09 / 01 / 2024

Add GST 18%